Cookbook

• AirGradient DIY Air Quality Sensor
  • ESPHome Configuration
  • See Also
• Arduino Port Expander
  • Binary_Sensor
  • Sensor
  • Output
  • Full Example
  • See Also
• BLE iTag Button
  • Quickstart
  • Configuration example:
  • Explanation
  • See Also
• BME280 Environment
  • Altitude and absolute humidity:
  • Equivalent sea level pressure:
  • Formula explanation
  • See Also
• Brilliant / Mirabella Genio Smart Plugs
  • 1. Create the ESPHome Firmware
  • 2. Flashing
    • 2.1 Prerequisites
    • 2.2 Installing the OS
    • 2.3 Connecting to the Pi via SSH
    • 2.4 Configuring the Pi
    • 2.5 Setup and Install tuya-convert
    • 2.6 Upload ESPHome Firmware using SFTP
    • 2.7 Use tuya-convert to install ESPHome Firmware
  • 3. Smart Plug Configurations
    • 3.1 Brilliant Smart Plug
    • 3.2 Mirabella Genio Wi-Fi 1 USB Adaptor
    • 3.3 Gosund SP1
    • 3.4 Topersun WL-SC01 Smart Plug
    • 3.5 NEO Coolcam wifi smart plug
    • 3.6 Arlec Grid Connect Smart Plug In Socket With 2.1A USB Charger
  • 4. Adding to Home Assistant
  • See Also
• BRUH Multisensor
  • See Also
• Time & Temperature on OLED Display
  • Hardware configuration
  • Software configuration
    • Getting Time
    • Getting Temperature
    • Define the Fonts
    • Display Definition
  • Rendering
  • Add a Text-Based Sensor
  • See Also
• Dual relay cover motor control
  • See Also
• Template Cover with Endstops
  • See Also
• Etekcity Voltson (ESW01-EU)
  • Flashing
  • Configuration
  • See Also
• Simple Garage Door
  • See Also
• Geiger counter RadiationD v1.1 (CAJOE)
  • Assembly:
    • Housing:
  • Configuration:
  • See Also
• H801 RGBW LED controller
  • Add A PIR(Motion) Sensor
  • See Also
• IAQ (Indoor Air Quality) Board
  • ESPHome Configuration
  • See Also
• Sonoff iFan02
  • See Also
• Ilonda Wifi Smart Fish Feeder (L88)
  • Wifi Smart Fish Feeder Configuration
  • See Also
• Infostripe
  • ESPHome configuration
  • Home Assistant configuration
  • See Also
• IWOOLE Table Lamp
• 1. Device overview
  • 1.1 Internal markings
• 2. ESPHome configuration
  • 2.1 Example configuration
• 3. Flashing
• See Also
• ESP32 Water Leak Detector (with notification)
  • Things you’ll need
  • Probe Connection
  • Assembled Components
  • Display Font
  • Calibration & Testing
    • Normal state
    • Wet state
    • Installed Project
  • ESPHome configuration
  • HomeAssistant configuration
  • See Also
• Mirabella Genio Bulbs
  • 1. Create the ESPHome Firmware
  • 2. Flashing
    • 2.1 Prerequisites
    • 2.2 Installing the OS
    • 2.3 Connecting to the Pi via SSH
    • 2.4 Configuring the Pi
    • 2.5 Setup and Install tuya-convert
    • 2.6 Upload ESPHome Firmware using SFTP
    • 2.7 Use tuya-convert to install ESPHome Firmware
  • 3. Bulb Configurations
    • 3.1 Monochromatic Bulbs
    • 3.2 Cold + Warm White Bulbs
    • 3.3 RGBW Color Bulbs
    • 3.4 CWWW Mirabella Genio Downlights
  • 4. Adding to Home Assistant
  • See Also
• Passive Infrared Sensor
  • See Also
• Non-Invasive Power Meter
  • See Also
• Relay
  • See Also
• DIY Light switch using a Sonoff Basic
  • Background
  • The Solution
  • Implementation
  • See Also
• DIY Light switch using a Sonoff Dual
  • R1
  • R2
  • See Also
• Sonoff Fish Pond Pump
  • Assumptions
  • 1. Configuration
    • 2. Programming
    • 3. Prepping and installing
    • 2.6. Home Assistant
  • See Also
• Sonoff Light switch options
  • See Also
• Sonoff T1/T2/T3 UK
  • T1
  • T2
  • T3
  • See Also
• TECKIN SB50 LED Bulb
  • See Also
• TEMT6000
  • Formula Explanation:
  • See Also
• EPEVER® MPPT Solar Charge Controller Tracer-AN Series
  • See Also
• Tuya RGBW LED controller
  • See Also
• Custom UART Text Sensor
  • Example usage
  • See Also
• Zemismart LED RGBW/RGBWW Downlights
  • 1. Create the ESPHome Firmware
  • 2. Flashing
    • 2.1 Prerequisites
    • 2.2 Installing the OS
    • 2.3 Connecting to the Pi via SSH
    • 2.4 Configuring the Pi
    • 2.5 Setup and Install tuya-convert
    • 2.6 Upload ESPHome Firmware using SFTP
    • 2.7 Use tuya-convert to install ESPHome Firmware
  • 3. Downlight Configuration
    • 3.1 Zemismart LED RGBW Downlight YAML
    • 3.2. Zemismart LED RGBWw Downlight YAML
  • 4. Adding to Home Assistant
  • See Also