ESPHome 2026.10.0 - October 2026

Read the ESPHome 2026.10.0 release notes on the blog for the release overview, feature highlights, upgrade checklist, and breaking changes.

Full list of changes

New Features

[wifi] Allow a forced roam check esphome#17349 by @clydebarrow (new-feature)
[serial_proxy] Add tap interface and port mode esphome#18955 by @kbx81 (new-feature) (breaking-change)
[sendspin] Add manufacturer, model, and firmware version options esphome#18792 by @kahrendt (new-feature)
[bridge] New component and cdc_acm_uart platform esphome#11689 by @kbx81 (new-component) (new-feature)
[tinyusb] Add on_mount/on_unmount triggers and is_mounted condition esphome#19067 by @kbx81 (new-feature)
[usb_uart] Add claim_comm_interface option esphome#18969 by @kbx81 (new-feature)
[uart_mux] New component to share a UART between a CDC-ACM bridge and local consumers esphome#19066 by @kbx81 (new-component) (new-feature)
[icnt86] Support ICNT86 touch driver esphome#18331 by @danepowell (new-component) (new-feature) (new-platform)
[sendspin] Add a switch platform to enable and disable the client esphome#19361 by @kahrendt (new-feature) (new-platform)
[mixer] Raise ducking decibel_reduction maximum to 255 esphome#19347 by @kahrendt (new-feature)
[esp32] Add a flash chip option that drops the unused flash vendor drivers esphome#19217 by @bdraco (new-feature)
[mdns] Advertise ota_signed when signed OTA verification is compiled in esphome#19407 by @kbx81 (new-feature)
[dfplayer] Add set_current_track_repeat action esphome#9186 by @myztillx (new-feature)
[RX8025T] add RX8025T realtime clock esphome#13274 by @remcom (new-component) (new-feature) (new-platform)
[pid] Pid climate add set deadband parameters action esphome#14730 by @ngolf (new-feature)
[uart] clock_source option esphome#16486 by @ikruglov (new-feature)
[TAS2780] Add TAS2780 audio amplifier esphome#15708 by @remcom (new-component) (new-feature) (new-platform)
[light] Add transition_state_publish_interval option to publish intermediate states during transitions esphome#11968 by @nohat (new-feature)
[ota] Add allow_plaintext_upload for devices that never migrated to encryption esphome#19396 by @bdraco (new-feature)
[esp32] Keep the NVS cache in PSRAM when PSRAM is guaranteed esphome#19378 by @bdraco (new-feature)
[light] Replace restore_mode with restore_state esphome#18997 by @clydebarrow (new-feature) (breaking-change)
[tfluna] New component for the TF-Luna Low Cost LiDAR Distance Sensor esphome#9199 by @candrews (new-component) (new-feature) (new-platform)
[pzem6l24] Add PZEM-6L24 three-phase energy monitor sensor esphome#17849 by @nuttytree (new-component) (new-feature) (new-platform)
[remote_base] Add AEG Hob2Hood Infrared Protocol esphome#4687 by @Mat931 (new-feature)
[mk2pvrouter] Add tag-based sensor defaults esphome#18870 by @FredM67 (new-feature)
[systa_bus] Add systa_bus component esphome#15473 by @Mat931 (new-component) (new-feature) (new-platform)
[snapshot] Add feature to record animated gifs from screen esphome#19421 by @clydebarrow (new-feature)
[light][lvgl] Add color names for light states esphome#19712 by @clydebarrow (new-feature)
[mk2pvrouter] Add binary_sensor platform esphome#19719 by @FredM67 (new-feature) (new-platform)
[mk2pvrouter] Add text_sensor platform esphome#19720 by @FredM67 (new-feature) (new-platform)
[xiaomi_body_scale] Add Xiaomi body scale S200 and S400 esphome#16476 by @dckiller51 (new-component) (new-feature) (new-platform)
[nrf52] Reboot straight into the app on a 2001 baud touch esphome#19727 by @bdraco (new-feature)
[esp8266] Add native toolchain that builds the Arduino core without PlatformIO esphome#18539 by @bdraco (new-feature)
[hoermann_hcp] Add the motor’s serial number and firmware version as text sensors esphome#19543 by @RaHehl (new-feature) (new-platform)
[hoermann_hcp] Add a door state text sensor esphome#19747 by @RaHehl (new-feature)
[counter] Add persistent counter sensor esphome#19746 by @clydebarrow (new-component) (new-feature) (new-platform)
[template][time] Add template time platform esphome#14838 by @ilikecake (new-feature) (new-platform)
[light] Resume the previous effect on off/on esphome#17791 by @TheRealChriAnd (new-feature)
[host] Build natively with ninja instead of PlatformIO esphome#19214 by @jesserockz (new-feature) (breaking-change)
[zephyr_mcumgr] add LED which is controled by bootloader esphome#16322 by @tomaszduda23 (new-feature)
[epaper_spi] reTerminal Sticky: Four-level grayscale for SSD1677 panels, and a full-refresh action esphome#19213 by @FuNK3Y (new-feature) (breaking-change)
[esp8266] Use our own compiler builds for the native toolchain esphome#19849 by @bdraco (new-feature)
[lvgl] Animation updates and debug outline option esphome#19420 by @clydebarrow (new-feature)
[ethernet] Add KSZ8851SNL SPI ethernet support esphome#19883 by @jesserockz (new-feature)
[zigbee] Add cluster: device_class to expose ESP32 sensors via measurement clusters instead of Analog/Binary Input esphome#17388 by @luar123 (new-feature)
[tas58xx] Add TAS58xx audio amplifier (TAS5805M) esphome#19595 by @remcom (new-component) (new-feature) (new-platform)
[zigbee] Implement switch support for esp32 esphome#17579 by @luar123 (new-feature)
[bthome_mithermometer] Decode 0.1C temperature and 1% humidity objects esphome#19956 by @mtmatteo79 (new-feature)
[resampler] Add resampler microphone platform esphome#19953 by @remcom (new-feature) (new-platform)
[espidf] Add —skip-bootloader for OTA only builds esphome#19925 by @bdraco (new-feature)
[light] Add color option to strobe and other color state esphome#19874 by @clydebarrow (new-feature)
[stcc4] Add component for the Sensirion STCC4 CO2 sensor esphome#19434 by @j9brown (new-component) (new-feature) (new-platform)
[substitutions] Support !include with a condition esphome#19455 by @j9brown (new-feature)
[esphome][ota][core] Compress OTA uploads on ESP32, RP2040, LibreTiny and host esphome#19037 by @bdraco (new-feature)
[tcp_uart] Add a TCP client that implements a UART esphome#19884 by @Bascht74 (new-component) (new-feature)
[core] Add new options suspend_loop and loop_interval esphome#18136 by @luar123 (new-feature)
[uart_tcp] Add a hardware UART copied to one TCP socket esphome#19887 by @Bascht74 (new-component) (new-feature)
[socket] Share the server side as TcpListener esphome#20037 by @Bascht74 (new-feature)
[tcp_uart] Add a server role with an IPv4 allow list esphome#20026 by @Bascht74 (new-feature)
[exponential_moving_average] Add EMA preserved across reboots esphome#19882 by @clydebarrow (new-component) (new-feature) (new-platform)
[epaper_spi] Add SSD1681 and the Waveshare 1.54in V2 panel esphome#18073 by @snoack (new-feature)
[mipi_spi] Light platform for AMOLED display brightness esphome#20212 by @clydebarrow (new-feature) (new-platform)
[tas58xx] Add support for tas5825 dac esphome#19971 by @mrtoy-me (new-feature)
[motion] Add gesture detection esphome#16787 by @clydebarrow (new-feature) (new-platform)
[homeassistant] Add text, select and button platforms esphome#19964 by @jesserockz (new-feature) (new-platform)
[espectre] Add Wi-Fi CSI motion detection component esphome#19801 by @francescopace (new-component) (new-feature) (new-platform)
[mipi_spi] Add Waveshare ESP32-S3-Touch-LCD-1.46 SPD2010 model esphome#19056 by @grischard (new-feature)
[api] Add outgoing connections so the device can dial Home Assistant (or anything that implements native API) esphome#18919 by @bdraco (new-feature)
[tcp_uart][uart_tcp] Add a disconnects sensor esphome#20096 by @Bascht74 (new-feature)
[zigbee] Add zigbee support for number on esp32 esphome#20243 by @luar123 (new-feature)
[xiaomi_mccgq02hl] Add Xiaomi Mijia Door/Window Sensor 2 (MCCGQ02HL) esphome#20104 by @ahpohl (new-component) (new-feature) (new-platform)
[usb_host] iManufacturer and iProduct descriptor filters esphome#19095 by @puddly (new-feature) (breaking-change)
[epaper_spi] Add is_updating condition esphome#20261 by @jesserockz (new-feature)
[serial_proxy] Add USB_SERIAL port type and device identity esphome#19308 by @puddly (new-feature)
[core] Select I/O expander pin providers by I2C address esphome#18939 by @clydebarrow (new-feature)
[audio_http][core] Add ca_certificate_path to audio_http media source esphome#19392 by @TheSwert (new-feature)
[api] Add a device wizard for Home Assistant onboarding esphome#19966 by @jesserockz (new-feature)

New Components

[bridge] New component and cdc_acm_uart platform esphome#11689 by @kbx81 (new-component) (new-feature)
[uart_mux] New component to share a UART between a CDC-ACM bridge and local consumers esphome#19066 by @kbx81 (new-component) (new-feature)
[icnt86] Support ICNT86 touch driver esphome#18331 by @danepowell (new-component) (new-feature) (new-platform)
[RX8025T] add RX8025T realtime clock esphome#13274 by @remcom (new-component) (new-feature) (new-platform)
[TAS2780] Add TAS2780 audio amplifier esphome#15708 by @remcom (new-component) (new-feature) (new-platform)
[tfluna] New component for the TF-Luna Low Cost LiDAR Distance Sensor esphome#9199 by @candrews (new-component) (new-feature) (new-platform)
[pzem6l24] Add PZEM-6L24 three-phase energy monitor sensor esphome#17849 by @nuttytree (new-component) (new-feature) (new-platform)
[systa_bus] Add systa_bus component esphome#15473 by @Mat931 (new-component) (new-feature) (new-platform)
[xiaomi_body_scale] Add Xiaomi body scale S200 and S400 esphome#16476 by @dckiller51 (new-component) (new-feature) (new-platform)
[pn71xx] Fix NCI transport and card emulation bugs; share code between PN7150 and PN7160 esphome#19589 by @kbx81 (new-component)
[counter] Add persistent counter sensor esphome#19746 by @clydebarrow (new-component) (new-feature) (new-platform)
[tas58xx] Add TAS58xx audio amplifier (TAS5805M) esphome#19595 by @remcom (new-component) (new-feature) (new-platform)
[stcc4] Add component for the Sensirion STCC4 CO2 sensor esphome#19434 by @j9brown (new-component) (new-feature) (new-platform)
[tcp_uart] Add a TCP client that implements a UART esphome#19884 by @Bascht74 (new-component) (new-feature)
[uart_tcp] Add a hardware UART copied to one TCP socket esphome#19887 by @Bascht74 (new-component) (new-feature)
[exponential_moving_average] Add EMA preserved across reboots esphome#19882 by @clydebarrow (new-component) (new-feature) (new-platform)
[unicode][font] move extract_unicode_codepoint to new component esphome#19969 by @ssieb (new-component)
[espectre] Add Wi-Fi CSI motion detection component esphome#19801 by @francescopace (new-component) (new-feature) (new-platform)
[xiaomi_mccgq02hl] Add Xiaomi Mijia Door/Window Sensor 2 (MCCGQ02HL) esphome#20104 by @ahpohl (new-component) (new-feature) (new-platform)
[api] Reply when an infrared/RF raw timings transmit has completed esphome#19086 by @bdraco (new-component)

New Platforms

[icnt86] Support ICNT86 touch driver esphome#18331 by @danepowell (new-component) (new-feature) (new-platform)
[sendspin] Add a switch platform to enable and disable the client esphome#19361 by @kahrendt (new-feature) (new-platform)
[RX8025T] add RX8025T realtime clock esphome#13274 by @remcom (new-component) (new-feature) (new-platform)
[TAS2780] Add TAS2780 audio amplifier esphome#15708 by @remcom (new-component) (new-feature) (new-platform)
[tfluna] New component for the TF-Luna Low Cost LiDAR Distance Sensor esphome#9199 by @candrews (new-component) (new-feature) (new-platform)
[pzem6l24] Add PZEM-6L24 three-phase energy monitor sensor esphome#17849 by @nuttytree (new-component) (new-feature) (new-platform)
[systa_bus] Add systa_bus component esphome#15473 by @Mat931 (new-component) (new-feature) (new-platform)
[mk2pvrouter] Add binary_sensor platform esphome#19719 by @FredM67 (new-feature) (new-platform)
[mk2pvrouter] Add text_sensor platform esphome#19720 by @FredM67 (new-feature) (new-platform)
[xiaomi_body_scale] Add Xiaomi body scale S200 and S400 esphome#16476 by @dckiller51 (new-component) (new-feature) (new-platform)
[hoermann_hcp] Add the motor’s serial number and firmware version as text sensors esphome#19543 by @RaHehl (new-feature) (new-platform)
[counter] Add persistent counter sensor esphome#19746 by @clydebarrow (new-component) (new-feature) (new-platform)
[template][time] Add template time platform esphome#14838 by @ilikecake (new-feature) (new-platform)
[tas58xx] Add TAS58xx audio amplifier (TAS5805M) esphome#19595 by @remcom (new-component) (new-feature) (new-platform)
[resampler] Add resampler microphone platform esphome#19953 by @remcom (new-feature) (new-platform)
[stcc4] Add component for the Sensirion STCC4 CO2 sensor esphome#19434 by @j9brown (new-component) (new-feature) (new-platform)
[exponential_moving_average] Add EMA preserved across reboots esphome#19882 by @clydebarrow (new-component) (new-feature) (new-platform)
[mipi_spi] Light platform for AMOLED display brightness esphome#20212 by @clydebarrow (new-feature) (new-platform)
[motion] Add gesture detection esphome#16787 by @clydebarrow (new-feature) (new-platform)
[homeassistant] Add text, select and button platforms esphome#19964 by @jesserockz (new-feature) (new-platform)
[espectre] Add Wi-Fi CSI motion detection component esphome#19801 by @francescopace (new-component) (new-feature) (new-platform)
[xiaomi_mccgq02hl] Add Xiaomi Mijia Door/Window Sensor 2 (MCCGQ02HL) esphome#20104 by @ahpohl (new-component) (new-feature) (new-platform)

Breaking Changes

[serial_proxy] Add tap interface and port mode esphome#18955 by @kbx81 (new-feature) (breaking-change)
[remote_receiver] Size the RMT ring buffer from receive symbols by default esphome#19100 by @bdraco (breaking-change)
[speaker_source] keep mute when volume changes esphome#18412 by @carriewattsmake (breaking-change)
[speaker] Make media player volume and mute independent esphome#19307 by @kahrendt (breaking-change)
[speaker] Remove deprecated codec_support_enabled option esphome#19074 by @bdraco (breaking-change)
[remote_receiver] Treat buffer size as bytes on the pulse ring targets esphome#19101 by @bdraco (breaking-change)
[climate_ir] Only advertise HEAT_COOL when heat and cool are both supported esphome#19483 by @leodrivera (breaking-change)
[light] Replace restore_mode with restore_state esphome#18997 by @clydebarrow (new-feature) (breaking-change)
[host] Build natively with ninja instead of PlatformIO esphome#19214 by @jesserockz (new-feature) (breaking-change)
[epaper_spi] reTerminal Sticky: Four-level grayscale for SSD1677 panels, and a full-refresh action esphome#19213 by @FuNK3Y (new-feature) (breaking-change)
[esp8266] Make the native arduino toolchain the default esphome#19886 by @bdraco (breaking-change)
[sendspin] Require a type on the switch platform esphome#20189 by @kahrendt (breaking-change)
[hoermann_hcp] Send each command once, and the lamp as a state esphome#19765 by @RaHehl (breaking-change)
[usb_host] iManufacturer and iProduct descriptor filters esphome#19095 by @puddly (new-feature) (breaking-change)

All changes

[ai] Advice to agents to limit verbiage esphome#18980 by @clydebarrow
[wifi] Allow a forced roam check esphome#17349 by @clydebarrow (new-feature)
[ci] Sync pre-commit revs and prek version from requirements files esphome#19026 by @jesserockz
[core] Restore the shared git hooks after post-checkout runs script/setup esphome#19036 by @jesserockz
[core] Share compiled binaries across modbus integration tests esphome#18945 by @bdraco
[ci] Refresh integration test durations esphome#19049 by @esphome[bot]
[core] Consolidate setup scripts into a cross-platform setup.py esphome#18856 by @jesserockz
[ci] Ask stale PR authors to merge dev instead of rebasing esphome#19064 by @jesserockz
[template] Surface value metadata on template entity forms esphome#17545 by @jesserockz
[mlx90614] pec validation esphome#6689 by @asergunov
[deep_sleep] disable loop esphome#18962 by @luar123
[logger] Flush uart before sleep in idf 6 esphome#18975 by @luar123
[zigbee] wake loop on defer/set_timeout esphome#19050 by @luar123
Bump aioesphomeapi from 46.3.0 to 46.4.0 esphome#19071 by @esphome[bot]
[serial_proxy] Add tap interface and port mode esphome#18955 by @kbx81 (new-feature) (breaking-change)
[es7210] Fix 4 channel microphone support esphome#19034 by @matt123p
[sendspin] Add manufacturer, model, and firmware version options esphome#18792 by @kahrendt (new-feature)
[uart] Add apply_settings_live() for in-place ESP-IDF reconfiguration esphome#19087 by @kbx81
[esp32] Trim mbedTLS to client-only defaults and stub vasprintf on the C6 esphome#19088 by @jesserockz
[remote_base] Make protocol methods non-virtual and size receiver lists from codegen esphome#19084 by @bdraco
[const] Centralize definition of CONF_MANUFACTURER esphome#19098 by @puddly
Bump aioesphomeapi from 46.4.0 to 46.4.1 esphome#19104 by @esphome[bot]
[remote_receiver] Size the RMT ring buffer from receive symbols by default esphome#19100 by @bdraco (breaking-change)
[core][lvgl] Migrate codegen helpers from LVGL to core code esphome#19105 by @clydebarrow
[bridge] New component and cdc_acm_uart platform esphome#11689 by @kbx81 (new-component) (new-feature)
[core] Isolate contextvars per task in the coroutine runner esphome#19238 by @clydebarrow
[bluetooth_proxy] Add an advertisement filter hook esphome#19220 by @davidcoulson
[spi] Send ESP8266 writes through transferBytes instead of a heap copy esphome#19265 by @bdraco
[ci] Refresh integration test durations esphome#19275 by @esphome[bot]
[issues] Add AI usage guidance to the bug report template esphome#19122 by @clydebarrow
[audio] Update esp-audio-libs to 4.0.0 esphome#19300 by @kahrendt
[i2s_audio] Ramp software volume changes esphome#19302 by @kahrendt
[tinyusb] Add on_mount/on_unmount triggers and is_mounted condition esphome#19067 by @kbx81 (new-feature)
[speaker][speaker_source] Make a volume of zero silent with an audio DAC esphome#19305 by @kahrendt
[speaker_source] Don’t remap a requested volume of zero esphome#19063 by @rexmoriarty
[speaker_source] keep mute when volume changes esphome#18412 by @carriewattsmake (breaking-change)
[speaker] Make media player volume and mute independent esphome#19307 by @kahrendt (breaking-change)
Synchronise Device Classes from Home Assistant esphome#19318 by @esphome[bot]
[usb_uart] Add claim_comm_interface option esphome#18969 by @kbx81 (new-feature)
[core] Add register_simple_action and register_parented_action helpers esphome#19321 by @bdraco
[mdns] Add runtime service enable/disable API (ESP32 only) esphome#19325 by @kahrendt
[uart_mux] New component to share a UART between a CDC-ACM bridge and local consumers esphome#19066 by @kbx81 (new-component) (new-feature)
[uart] Add IDFUARTComponent::flush_input() and use it in uart_mux esphome#19336 by @kbx81
[template] Skip the switch optimistic and assumed state setters when they match the default esphome#19232 by @bdraco
[template] Move set_optimistic into the headers esphome#19278 by @bdraco
[sds011] Move set_rx_mode_only into the header esphome#19298 by @bdraco
[max44009] Move set_mode into the header esphome#19297 by @bdraco
[st7789v] Move set_model_str into the header esphome#19296 by @bdraco
[bang_bang] Move the single store setters into the header esphome#19287 by @bdraco
[thermostat] Move set_default_preset into the header esphome#19294 by @bdraco
[esp32_camera] Move the single store setters into the header esphome#19285 by @bdraco
[mqtt_subscribe] Move set_qos into the headers esphome#19282 by @bdraco
[web_server] Move the CSS and JS setters into the header esphome#19286 by @bdraco
[graphical_display_menu] Move set_display and set_font into the header esphome#19291 by @bdraco
[tsl2561] Move set_is_cs_package into the header esphome#19289 by @bdraco
[template] Move the cover and valve set_has_* setters into the headers esphome#19283 by @bdraco
[haier] Move set_send_wifi into the header esphome#19299 by @bdraco
[openthread] Move set_mdns into the header esphome#19295 by @bdraco
[lc709203f] Move the single store setters into the header esphome#19290 by @bdraco
[tsl2591] Move the single store setters into the header esphome#19288 by @bdraco
[waveshare_epaper] Move set_full_update_every into the header esphome#19280 by @bdraco
[bme280_base][bme680][bmp280_base] Move set_iir_filter into the headers esphome#19281 by @bdraco
[adc] Move set_sampling_mode into the header esphome#19293 by @bdraco
[tsl2561][tsl2591] Move set_gain into the headers esphome#19284 by @bdraco
[template][modbus_controller] Move set_assumed_state into the headers esphome#19279 by @bdraco
[esp32_ble_tracker] Initialize ESPBTClient::app_id esphome#19199 by @bdraco
[bluetooth_connection] Use a user provided default constructor for BluetoothConnection esphome#19200 by @bdraco
[restart] Use a user provided default constructor for RestartSwitch esphome#19204 by @bdraco
[gpio] Use a user provided default constructor for GPIOSwitch esphome#19203 by @bdraco
[binary_sensor] Use a user provided default constructor for DelayedOnFilter esphome#19205 by @bdraco
[binary_sensor] Use a user provided default constructor for DelayedOffFilter esphome#19206 by @bdraco
[binary_sensor] Use a user provided default constructor esphome#19111 by @bdraco
[ld2450] Use a user provided default constructor for RestartButton esphome#19183 by @bdraco
[ld2450] Use a user provided default constructor for FactoryResetButton esphome#19182 by @bdraco
[ld2412] Use a user provided default constructor for DistanceResolutionSelect esphome#19185 by @bdraco
[ld2412] Use a user provided default constructor for BaudRateSelect esphome#19184 by @bdraco
[ld2412] Use a user provided default constructor for LightOutControlSelect esphome#19186 by @bdraco
[ld2450] Use a user provided default constructor for BaudRateSelect esphome#19187 by @bdraco
[ld2450] Use a user provided default constructor for BluetoothSwitch esphome#19191 by @bdraco
[ld2412] Use a user provided default constructor for BluetoothSwitch esphome#19189 by @bdraco
[number] Initialize Number::state esphome#19114 by @bdraco
[ld2450] Use a user provided default constructor for PresenceTimeoutNumber esphome#19195 by @bdraco
[ld2450] Use a user provided default constructor for ZoneTypeSelect esphome#19188 by @bdraco
[ld2412] Use a user provided default constructor for EngineeringModeSwitch esphome#19190 by @bdraco
[ld2412] Use a user provided default constructor for LightThresholdNumber esphome#19193 by @bdraco
[scd4x] Use a user provided default constructor for PerformForcedCalibrationAction esphome#19176 by @bdraco
[safe_mode] Use a user provided default constructor for SafeModeComponent esphome#19163 by @bdraco
[bluetooth_connection] Use a user provided default constructor for BluedroidGattClient esphome#19201 by @bdraco
[core] Give StaticVector a user provided default constructor esphome#19110 by @bdraco
[template] Use a user provided default constructor for TemplateBinarySensor esphome#19128 by @bdraco
[version] Use a user provided default constructor for VersionTextSensor esphome#19139 by @bdraco
[binary_sensor] Use a user provided default constructor for SettleFilter esphome#19135 by @bdraco
[internal_temperature] Use a user provided default constructor for InternalTemperatureSensor esphome#19141 by @bdraco
[uptime] Use a user provided default constructor for UptimeSecondsSensor esphome#19140 by @bdraco
[status] Use a user provided default constructor for StatusBinarySensor esphome#19138 by @bdraco
[uart] Use a user provided default constructor for IDFUARTComponent esphome#19142 by @bdraco
[gpio] Use a user provided default constructor for GPIOBinarySensor esphome#19143 by @bdraco
[http_request] Use a user provided default constructor for HttpRequestIDF esphome#19175 by @bdraco
[restart] Use a user provided default constructor for RestartButton esphome#19168 by @bdraco
[ethernet_info] Use a user provided default constructor for IPAddressEthernetInfo esphome#19166 by @bdraco
[preferences] Use a user provided default constructor for IntervalSyncer esphome#19164 by @bdraco
[template] Use a user provided default constructor for TemplateSensor esphome#19125 by @bdraco
[core] Construct App without value initialization esphome#19109 by @bdraco
[update] Initialize UpdateInfo::progress esphome#19121 by @bdraco
[template] Use a user provided default constructor for TemplateTextSensor esphome#19126 by @bdraco
[template] Use a user provided default constructor for TemplateButton esphome#19124 by @bdraco
[template] Use a user provided default constructor for TemplateSelect esphome#19130 by @bdraco
[template] Use a user provided default constructor for TemplateEvent esphome#19127 by @bdraco
[alarm_control_panel] Initialize the state members esphome#19120 by @bdraco
[text_sensor] Use a user provided default constructor esphome#19112 by @bdraco
[fan] Initialize Fan::restore_mode_ esphome#19118 by @bdraco
[ld2412] Drop the unused gate index from GateThresholdNumber esphome#19107 by @bdraco
[esp8266_pwm] Use a user provided default constructor for ESP8266PWM esphome#19198 by @bdraco
[api] Skip setters that pass the default port, reboot timeout and batch delay esphome#19227 by @bdraco
[core] Use a user provided default constructor for DelayAction esphome#19137 by @bdraco
[core] Use a user provided default constructor for Automation esphome#19197 by @bdraco
[pca9554] Use a user provided default constructor for PCA9554GPIOPin esphome#19208 by @bdraco
[pcf8574] Use a user provided default constructor for PCF8574GPIOPin esphome#19207 by @bdraco
[improv_ble] Rename from esp32_improv and decouple from ESP32 esphome#19264 by @jesserockz
[http_request] Keep the update manifest URL as a pointer to the literal esphome#19211 by @bdraco
[http_request] Take the URL and method as C strings esphome#19215 by @bdraco
[speaker] Remove deprecated codec_support_enabled option esphome#19074 by @bdraco (breaking-change)
[i2s_audio] Resync DMA lockstep in place instead of restarting the speaker task esphome#19319 by @kahrendt
[sendspin] Start mDNS service disabled, enable once server is running esphome#19326 by @kahrendt
[sendspin] Bump sendspin-cpp to v0.8.0 esphome#19357 by @kahrendt
[display] Trim the per pixel cost of draw_pixel_at esphome#19360 by @bdraco
[nextion] Remove deprecated get_wave_chan_id() esphome#19080 by @bdraco
[template] Remove deprecated bypass_before_arming() esphome#19075 by @bdraco
[modbus] Remove disable_crc validation stub esphome#19078 by @bdraco
[modbus] Remove deprecated send() esphome#19079 by @bdraco
[icnt86] Support ICNT86 touch driver esphome#18331 by @danepowell (new-component) (new-feature) (new-platform)
[esp32_hosted] Keep the update manifest URL as a pointer to the literal esphome#19212 by @bdraco
[esp8266] Drop the dead NEW_OOM_ABORT flag and its nothrow advice esphome#19247 by @bdraco
[ld2450] Use a user provided default constructor for MultiTargetSwitch esphome#19192 by @bdraco
[image] Drop the unused stride_ member esphome#19353 by @bdraco
[esp32] Redefine FILE to the basename so assert paths stay out of RAM esphome#19106 by @bdraco
[core] Fold the modbus write and bits tests into the shared mesh fixture esphome#18946 by @bdraco
[esp32] Enable octal flash when the flash mode is opi esphome#19218 by @bdraco
[remote_receiver] Wake the main loop when the RMT callback stores a frame esphome#19102 by @bdraco
[remote_base] Accept protocols registered by external components esphome#19332 by @bdraco
[sendspin] Add a switch platform to enable and disable the client esphome#19361 by @kahrendt (new-feature) (new-platform)
[switch] Use Switch::control() instead of hand written turn_on/turn_off branches esphome#19364 by @bdraco
[mixer] Raise ducking decibel_reduction maximum to 255 esphome#19347 by @kahrendt (new-feature)
[ci] Move skills to .agents/skills with .claude and .github symlinks esphome#19369 by @jesserockz
[audio] Bump esp-audio-libs to v4.0.1 esphome#19372 by @kahrendt
[modbus_controller] Remove deprecated helper shims esphome#19076 by @bdraco
[remote_receiver] [remote_transmitter] Keep the RMT setup error message as a pointer to the literal esphome#19210 by @bdraco
[remote_receiver] Treat buffer size as bytes on the pulse ring targets esphome#19101 by @bdraco (breaking-change)
[rp2] Bump arduino-pico framework to 6.1.0 esphome#19261 by @bdraco
[image] Blend grayscale alpha with Color::gradient esphome#19356 by @bdraco
[output] Use BinaryOutput::set_state() instead of hand written turn_on/turn_off branches esphome#19366 by @bdraco
[web_server] Reduce flash used by the JSON and request helpers esphome#19303 by @bdraco
[sensor] Remove deprecated raw_state member esphome#19077 by @bdraco
[espidf] Emit json2 size data so the link edge is not blocked esphome#18848 by @bdraco
[esp32] Add a flash chip option that drops the unused flash vendor drivers esphome#19217 by @bdraco (new-feature)
[core] Lint bare string literal ternaries in ESP_LOG arguments esphome#18908 by @bdraco
[web_server_idf] Close stalled EventSource sessions via HTTPD esphome#17800 by @jeroen85
[mdns] Advertise ota_signed when signed OTA verification is compiled in esphome#19407 by @kbx81 (new-feature)
[core] fix capitalisation of “pin” esphome#19405 by @Xiretza
[socket] Fix set_sockaddr() accepting malformed IPv4 addresses esphome#19394 by @rwrozelle
[ci] Add code-review agent skill for GitHub Copilot esphome#19370 by @jesserockz
[ci] Refresh integration test durations esphome#19435 by @esphome[bot]
[syslog] Add configurable RFC 3164 and RFC 5424 formats esphome#18993 by @iago-veiga
Bump aioesphomeapi from 46.4.1 to 46.5.0 esphome#19463 by @esphome[bot]
[zigbee] Require mbedTLS extras for Zigbee crypto esphome#19457 by @luar123
[yaml_util][substitutions] Repair bad tests esphome#19468 by @j9brown
[fujitsu_general] Use constexpr for the protocol constants esphome#19486 by @leodrivera
[core][cover] Add register_apply_action for actions that only forward values esphome#19469 by @bdraco
[climate_ir] Only advertise HEAT_COOL when heat and cool are both supported esphome#19483 by @leodrivera (breaking-change)
[gree] Store the model in one byte esphome#19488 by @leodrivera
[mitsubishi] Store the fan mode and default directions in one byte each esphome#19489 by @leodrivera
[fujitsu_general] Read the mode, fan speed and swing fields with their real width esphome#18297 by @leodrivera
[docker] Drop the unused PlatformIO library preinstall esphome#19504 by @bdraco
[core] Call a lambda whose only statement returns a braced value esphome#19503 by @bdraco
[switch] Use register_apply_action for the switch actions esphome#19498 by @bdraco
[valve] Use register_apply_action for valve.control esphome#19474 by @bdraco
[template] Use register_apply_action for climate.template.publish esphome#19495 by @bdraco
[cover] Use register_apply_action for the open, close, stop and toggle actions esphome#19500 by @bdraco
[at581x] Use register_apply_action for the settings and reset actions esphome#19496 by @bdraco
[rf_bridge] Use register_apply_action for the actions esphome#19497 by @bdraco
[rtttl] Use register_apply_action for rtttl.play and rtttl.stop esphome#19482 by @bdraco
[remote_base] Generate the gobox code as uint64_t esphome#19478 by @bdraco
[nrf52] disable USB if not configured by esphome to save power esphome#19493 by @tomaszduda23
[gree] Remove the traits() override now handled by climate_ir esphome#19484 by @leodrivera
Bump bundled esphome-device-builder to 1.15.0 esphome#19526 by @esphome[bot]
[dfplayer] Add set_current_track_repeat action esphome#9186 by @myztillx (new-feature)
[mitsubishi] Use the climate_ir traits() for supported modes esphome#19485 by @leodrivera
[RX8025T] add RX8025T realtime clock esphome#13274 by @remcom (new-component) (new-feature) (new-platform)
[pid] Pid climate add set deadband parameters action esphome#14730 by @ngolf (new-feature)
[modbus] Drop a deferred server reply when another frame arrives first esphome#19534 by @exciton
[modbus] Log the discarded bytes, not just how many esphome#19428 by @dalklein
[sprinkler] Use register_apply_action for the setter actions esphome#19471 by @bdraco
[nextion] Use register_apply_action for set_brightness and the publish actions esphome#19529 by @bdraco
[network] Remove deprecated IPAddress::str() from the host build esphome#19528 by @bdraco
[esp32][esp32_hosted] Bump recommended Arduino to 3.3.12 and platform to 55.03.312 and PlatformIO to 6.2.0 esphome#19417 by @swoboda1337
[speaker] Use register_apply_action for the speaker actions esphome#19535 by @bdraco
[pulse_meter] Use register_apply_action for pulse_meter.set_total_pulses esphome#19533 by @bdraco
[esp8266] Add the native build spec esphome#18559 by @bdraco
[voice_assistant] Use register_apply_action for start, start_continuous and stop esphome#19536 by @bdraco
[hlk_fm22x] Use register_apply_action for scan, enroll, delete, delete_all and reset esphome#19537 by @bdraco
[text_sensor] Use register_apply_action for text_sensor.template.publish esphome#19539 by @bdraco
[espnow] Use register_apply_action for peer.add, peer.delete and set_channel esphome#19538 by @bdraco
[pulse_counter] Use register_apply_action for pulse_counter.set_total_pulses esphome#19532 by @bdraco
[rp2_ble_tracker] Use register_apply_action for stop_scan esphome#19524 by @bdraco
[bk72xx_ble_tracker] Use register_apply_action for stop_scan esphome#19522 by @bdraco
[alarm_control_panel] Use register_apply_action for arm_away, arm_home, arm_night and disarm esphome#19521 by @bdraco
[ln882h_ble_tracker] Use register_apply_action for stop_scan esphome#19523 by @bdraco
[template] Use register_apply_action for lock.template.publish and valve.template.publish esphome#19525 by @bdraco
[servo] Use register_apply_action for servo.write and servo.detach esphome#19531 by @bdraco
[output] Use register_apply_action for the output actions esphome#19512 by @bdraco
[datetime] Use register_apply_action for date.set, time.set and datetime.set esphome#19513 by @bdraco
[media_player] Use register_apply_action for the media player actions esphome#19514 by @bdraco
[ledc] Use register_apply_action for the set_frequency action esphome#19515 by @bdraco
[libretiny_pwm] Use register_apply_action for the set_frequency action esphome#19518 by @bdraco
[cc1101] Use register_apply_action for the setter actions esphome#19472 by @bdraco
[select] Use register_apply_action for the set, set_index and operation actions esphome#19511 by @bdraco
[number] Use register_apply_action for the set and operation actions esphome#19510 by @bdraco
[display] Use register_apply_action for display.page.show_next and show_previous esphome#19519 by @bdraco
[text] Use register_apply_action for text.set esphome#19509 by @bdraco
[rp2040_pwm] Use register_apply_action for the set_frequency action esphome#19517 by @bdraco
[stepper] Use register_apply_action for the setter actions esphome#19470 by @bdraco
[esp32_ble_tracker] Use register_apply_action for start_scan and stop_scan esphome#19520 by @bdraco
[fan] Use register_apply_action for fan.turn_on esphome#19473 by @bdraco
[globals] Use register_apply_action for globals.set esphome#19481 by @bdraco
[event] Use register_apply_action for event.trigger esphome#19508 by @bdraco
[sensor] Use register_apply_action for sensor.template.publish esphome#19507 by @bdraco
[mitsubishi_cn105] Use register_apply_action for vane.control esphome#19477 by @bdraco
[binary_sensor] Use register_apply_action for binary_sensor.template.publish esphome#19506 by @bdraco
[climate] Use register_apply_action for climate.control esphome#19475 by @bdraco
[update] Use register_apply_action for update.perform esphome#19505 by @bdraco
[light] Use register_apply_action for the light control actions esphome#19476 by @bdraco
[esp8266_pwm] Use register_apply_action for the set_frequency action esphome#19516 by @bdraco
[esp8266] Add the native ninja emission esphome#18560 by @bdraco
[core][cover] Add register_apply_condition for conditions that only test the parent esphome#19540 by @bdraco
[text_sensor] Use register_apply_condition for text_sensor.state esphome#19541 by @bdraco
[core] Add ESPHOME_strlen_P to the progmem helpers esphome#19574 by @bdraco
[lvgl] Allow negative text_letter_space, text_line_space esphome#19576 by @elpollodiablo
[core][logger] Keep ESP8266 log strings in flash and deprecate the RAM option esphome#19577 by @bdraco
[ha-addon] Announce the MCP server to Home Assistant esphome#19413 by @bdraco
[rotary_encoder] Use register_apply_action for the set_value action esphome#19545 by @bdraco
[audio_dac] Use register_apply_action for the mute_off, mute_on and set_volume actions esphome#19546 by @bdraco
[online_image] Use register_apply_action for the set_url and release actions esphome#19547 by @bdraco
[dfplayer] Use register_apply_action for the play, volume, eq, device and transport actions esphome#19549 by @bdraco
[mqtt] Use register_apply_condition for mqtt.connected esphome#19561 by @bdraco
[time] Use register_apply_condition for time.has_time esphome#19560 by @bdraco
[lock] Use register_apply_condition for lock.is_locked and lock.is_unlocked esphome#19559 by @bdraco
[script] Use register_apply_condition for script.is_running esphome#19558 by @bdraco
[media_player] Use register_apply_condition for the state and muted conditions esphome#19557 by @bdraco
[climate_ir] Store the supported modes in one mask esphome#19580 by @leodrivera
[light] Use register_apply_condition for light.is_on and light.is_off esphome#19556 by @bdraco
[fan] Use register_apply_condition for fan.is_on and fan.is_off esphome#19555 by @bdraco
[binary_sensor] Use register_apply_condition for binary_sensor.is_on and binary_sensor.is_off esphome#19554 by @bdraco
[switch] Use register_apply_condition for switch.is_on and switch.is_off esphome#19553 by @bdraco
[core] Collapse ESP8266 flash string ifdefs onto the progmem helpers esphome#19578 by @bdraco
[core][select] Pass the select.set option as a plain literal esphome#19568 by @bdraco
[event] Trigger events without building a temporary std::string esphome#19567 by @bdraco
[automation] Remove dead trigger classes from sensor, number and text_sensor esphome#19565 by @bdraco
[tests] Give the binary_sensor and sensor publish targets distinct ids esphome#19564 by @bdraco
[event] Remove the unused std::vector set_event_types overload esphome#19566 by @bdraco
[speaker] Use register_apply_condition for speaker.is_playing and speaker.is_stopped esphome#19562 by @bdraco
[light] Accept the top-level white key from Home Assistant’s MQTT JSO… esphome#19570 by @ryan-ronnander
[core] Let register_apply_action read the parent id from another schema key esphome#19548 by @bdraco
[tests] Point the binary_sensor conditions at the renamed publish target esphome#19583 by @bdraco
[core] Lint duplicate UNIT_/CONF_ constants against both const homes esphome#19422 by @jesserockz
[api] Pass the encode cursor by value through the protobuf helpers esphome#19014 by @bdraco
[remote_transmitter] Use register_apply_action for the digital_write action esphome#19550 by @bdraco
[automation] Remove dead trigger classes from switch, button, binary_sensor and event esphome#19563 by @bdraco
[tests] Define USE_WEBSERVER_PORT in the light unit test override esphome#19584 by @bdraco
[api] Make generated encode and size entry points type erased esphome#19015 by @bdraco
[core] Silence -Wunused-function for user builds esphome#19571 by @exciton
[uart] clock_source option esphome#16486 by @ikruglov (new-feature)
[api] Collapse the three protobuf decode virtuals into one esphome#19016 by @bdraco
[TAS2780] Add TAS2780 audio amplifier esphome#15708 by @remcom (new-component) (new-feature) (new-platform)
[light] Add transition_state_publish_interval option to publish intermediate states during transitions esphome#11968 by @nohat (new-feature)
[api] Default response only string fields to a null StringRef esphome#19025 by @bdraco
[api] Decode without a vtable esphome#19029 by @bdraco
[nextion] Keep add_waveform_data() available without a waveform sensor esphome#19590 by @swoboda1337
[core] Keep static task TCB in internal RAM esphome#19426 by @snabb
[core] Dispatch controller updates through generated direct calls esphome#19588 by @bdraco
[ota] Treat a client that leaves after the handshake as a clean close esphome#19401 by @bdraco
[nrf52] add device power manager support to deep sleep component esphome#19494 by @tomaszduda23
[mcp3204] Read a conversion in one SPI transaction esphome#19423 by @oxynatOr
[sgp30][sgp4x] Migrate CONF_HUMIDITY_SOURCE to const.py esphome#19436 by @j9brown
[noise] Run the ESP8266 at 160 MHz during the handshake esphome#19233 by @bdraco
[button] Use register_apply_action for button.press esphome#19598 by @bdraco
[zigbee] move init back into setup esphome#19427 by @luar123
[sendspin] Use register_apply_action for the switch, static delay and transition_finished actions esphome#19608 by @bdraco
[mqtt] Use register_apply_action for mqtt.publish, mqtt.enable and mqtt.disable esphome#19602 by @bdraco
[safe_mode] Use register_apply_action for safe_mode.mark_successful esphome#19605 by @bdraco
[lock] Use register_apply_action for lock.lock, lock.unlock and lock.open esphome#19601 by @bdraco
[fan] Use register_apply_action for fan.toggle and fan.turn_off esphome#19600 by @bdraco
[script] Use register_apply_action for script.stop esphome#19599 by @bdraco
[deep_sleep] Use register_apply_action for deep_sleep.prevent and deep_sleep.allow esphome#19607 by @bdraco
[ota] Add allow_plaintext_upload for devices that never migrated to encryption esphome#19396 by @bdraco (new-feature)
[core] Lint against std::nothrow, use RAMAllocator instead esphome#19244 by @bdraco
[esp32] Keep the NVS cache in PSRAM when PSRAM is guaranteed esphome#19378 by @bdraco (new-feature)
[micro_wake_word] Use the apply helpers for the start, stop and model automations esphome#19620 by @bdraco
[microphone] Use the apply helpers for the capture, mute and condition automations esphome#19619 by @bdraco
[wireguard] Use the apply helpers for the enable, disable, enabled and peer_online automations esphome#19616 by @bdraco
[core] Migrate trivial action and condition builders to the shared helpers esphome#19322 by @bdraco
[sprinkler] Use register_apply_action for the seven keyless controller actions esphome#19617 by @bdraco
[valve] Use register_apply_action for valve.open, valve.close, valve.stop and valve.toggle esphome#19618 by @bdraco
[duty_time] Use one import style for the automation module esphome#19622 by @bdraco
[haier] Use register_apply_action for the thirteen climate.haier actions esphome#19624 by @bdraco
[midea] Use register_apply_action for the eight midea_ac actions esphome#19625 by @bdraco
[display_menu_base] Use the apply helpers for the eight display_menu actions and is_active esphome#19626 by @bdraco
[alarm_control_panel] Use register_apply_action for pending and triggered, drop the chime and ready actions that had no class esphome#19627 by @bdraco
[integration] Use register_apply_action for sensor.integration.reset and set_value esphome#19628 by @bdraco
[scd4x] Use register_apply_action for perform_forced_calibration and factory_reset esphome#19630 by @bdraco
[mhz19] Use register_apply_action for the four mhz19 actions esphome#19631 by @bdraco
[update] Use the apply helpers for update.check and update.is_available esphome#19632 by @bdraco
[animation] Use register_apply_action for next_frame, prev_frame and set_frame esphome#19633 by @bdraco
[duty_time] Use the apply helpers for the start, stop, reset and is_running automations esphome#19634 by @bdraco
[sx127x] Use register_apply_action for the five mode and calibration actions esphome#19636 by @bdraco
[sx126x] Use register_apply_action for the five mode and calibration actions esphome#19635 by @bdraco
[pcf8563] Use register_apply_action for pcf8563.write_time and pcf8563.read_time esphome#19639 by @bdraco
[max7219digit] Use register_apply_action for the seven max7219digit actions esphome#19641 by @bdraco
[binary_sensor] Use register_apply_action for binary_sensor.invalidate_state esphome#19637 by @bdraco
Bump aioesphomeapi from 46.5.0 to 46.6.0 esphome#19648 by @esphome[bot]
[ds1307] Use register_apply_action for ds1307.write_time and ds1307.read_time esphome#19638 by @bdraco
[senseair] Use register_apply_action for the five senseair actions esphome#19643 by @bdraco
[key_collector] Use register_apply_action for key_collector.enable and key_collector.disable esphome#19646 by @bdraco
[fingerprint_grow] Use register_apply_action for the six fingerprint_grow actions esphome#19640 by @bdraco
[tm1651] Use register_apply_action for the five tm1651 actions esphome#19647 by @bdraco
[sps30] Use register_apply_action for the three sps30 actions esphome#19644 by @bdraco
[sim800l] Use register_apply_action for the five sim800l actions esphome#19645 by @bdraco
[pzemac] Use register_apply_action for pzemac.reset_energy esphome#19650 by @bdraco
[hbridge] Use register_apply_action for fan.hbridge.brake esphome#19649 by @bdraco
[pzemdc] Use register_apply_action for pzemdc.reset_energy esphome#19651 by @bdraco
[sen5x] Use register_apply_action for sen5x.start_fan_autoclean esphome#19653 by @bdraco
[scd30] Use register_apply_action for scd30.force_recalibration_with_reference esphome#19652 by @bdraco
[nau7802] Use register_apply_action for the three calibration actions esphome#19657 by @bdraco
[pcf85063] Use register_apply_action for pcf85063.write_time and pcf85063.read_time esphome#19659 by @bdraco
[htu21d] Use register_apply_action for htu21d.set_heater and htu21d.set_heater_level esphome#19658 by @bdraco
[cc1101] Use register_apply_action for begin_tx, begin_rx, reset and set_idle esphome#19661 by @bdraco
[sound_level] Use register_apply_action for sound_level.start and sound_level.stop esphome#19656 by @bdraco
[core] Report unknown for switch, climate and water heater with no state esphome#19458 by @tronikos
[ld2410] Use register_apply_action for bluetooth_password.set esphome#19667 by @bdraco
[pmwcs3] Use register_apply_action for the calibration and address actions esphome#19666 by @bdraco
[core] Make Action::stop_complex and Action::is_running non-virtual esphome#19662 by @bdraco
[ezo_pmp] Use register_apply_action for the twelve ezo_pmp actions esphome#19663 by @bdraco
[bm8563] Use register_apply_action for read_time, write_time and start_timer esphome#19665 by @bdraco
[grove_tb6612fng] Use register_apply_action for the six motor actions esphome#19664 by @bdraco
[hdc302x] Use register_apply_action for heater_on and heater_off esphome#19673 by @bdraco
[max6956] Use register_apply_action for set_brightness_global and set_brightness_mode esphome#19672 by @bdraco
[uart_mux] Use the apply helpers for select_local, select_bridge and is_local esphome#19671 by @bdraco
[ufire_ise] Use register_apply_action for calibrate_probe_low, calibrate_probe_high and reset esphome#19670 by @bdraco
[mcp4461] Use register_apply_action for the four wiper actions esphome#19669 by @bdraco
[rx8130] Use register_apply_action for read_time and write_time esphome#19674 by @bdraco
[hub75] Use register_apply_action for hub75.set_brightness esphome#19677 by @bdraco
[cm1106] Use register_apply_action for cm1106.calibrate_zero esphome#19678 by @bdraco
[ags10] Use register_apply_action for new_i2c_address and set_zero_point esphome#19676 by @bdraco
[ufire_ec] Use register_apply_action for calibrate_probe and reset esphome#19675 by @bdraco
[esp_ldo] Use register_apply_action for esp_ldo.voltage.adjust esphome#19680 by @bdraco
[light] Replace restore_mode with restore_state esphome#18997 by @clydebarrow (new-feature) (breaking-change)
[tfluna] New component for the TF-Luna Low Cost LiDAR Distance Sensor esphome#9199 by @candrews (new-component) (new-feature) (new-platform)
[pzem6l24] Add PZEM-6L24 three-phase energy monitor sensor esphome#17849 by @nuttytree (new-component) (new-feature) (new-platform)
[remote_base] Add AEG Hob2Hood Infrared Protocol esphome#4687 by @Mat931 (new-feature)
[mk2pvrouter] Add tag-based sensor defaults esphome#18870 by @FredM67 (new-feature)
[web_server] Expose temperature units for climate and water heater entities esphome#19572 by @crnjan
[audio_adc] Use register_apply_action for audio_adc.set_mic_gain esphome#19679 by @bdraco
[max17043] Use register_apply_action for max17043.sleep_mode esphome#19682 by @bdraco
[hc8] Use register_apply_action for hc8.calibrate esphome#19681 by @bdraco
[cs5460a] Use register_apply_action for cs5460a.restart esphome#19683 by @bdraco
[pipsolar] Use register_apply_action for output.pipsolar.set_level esphome#19685 by @bdraco
[speaker_source] Use register_apply_action for speaker_source.set_playlist_delay esphome#19686 by @bdraco
[mixer] Use register_apply_action for mixer_speaker.apply_ducking esphome#19689 by @bdraco
[zigbee] Use register_apply_action for zigbee.factory_reset esphome#19690 by @bdraco
[zephyr_ble_server] Use register_apply_action for ble_server.numeric_comparison_reply esphome#19692 by @bdraco
[dfrobot_sen0395] Use register_apply_action for dfrobot_sen0395.reset esphome#19693 by @bdraco
[lightwaverf] Use register_apply_action for lightwaverf.send_raw esphome#19698 by @bdraco
[motion] Use register_apply_action for motion.clear_calibration esphome#19700 by @bdraco
[dfplayer] Use register_apply_condition for dfplayer.is_playing esphome#19701 by @bdraco
[snapshot] Use register_apply_action for snapshot.take esphome#19696 by @bdraco
[tinyusb] Use register_apply_condition for tinyusb.is_mounted esphome#19702 by @bdraco
[voice_assistant] Use register_apply_condition for is_running and connected esphome#19703 by @bdraco
[mitsubishi_cn105] Use register_apply_action for set_remote_temperature and clear_remote_temperature esphome#19706 by @bdraco
[sun] Use register_apply_condition for is_above_horizon and is_below_horizon esphome#19704 by @bdraco
[alarm_control_panel] Use register_apply_condition for is_armed and ready esphome#19707 by @bdraco
[aic3204] Use register_apply_action for aic3204.set_auto_mute_mode esphome#19684 by @bdraco
[pid] Use register_apply_action for climate.pid.autotune esphome#19708 by @bdraco
[bl0906] Use register_apply_action for bl0906.reset_energy esphome#19688 by @bdraco
[openthread] Use register_apply_action for openthread.set_poll_period esphome#19697 by @bdraco
[emontx] Use register_apply_action for emontx.send_command esphome#19687 by @bdraco
[core] Pass the copy flag to JsonString explicitly in the StringRef conversion esphome#19709 by @bdraco
[it8951] Use register_apply_action for it8951.update esphome#19691 by @bdraco
[core] Render an id constant in an apply field as the object it names esphome#19694 by @bdraco
[router] Use register_apply_action for router.speaker.switch_output esphome#19695 by @bdraco
[systa_bus] Add systa_bus component esphome#15473 by @Mat931 (new-component) (new-feature) (new-platform)
[display] Use register_apply_condition for display.is_displaying_page esphome#19705 by @bdraco
Bump bundled esphome-device-builder to 1.16.0 esphome#19710 by @esphome[bot]
[socket] Add outgoing connections to the raw lwIP TCP implementation esphome#18982 by @bdraco
[snapshot] Add feature to record animated gifs from screen esphome#19421 by @clydebarrow (new-feature)
[const] Share CONF_HOST esphome#19716 by @bdraco
[light][lvgl] Add color names for light states esphome#19712 by @clydebarrow (new-feature)
[gree] Encode temperature as offset from 16°C esphome#19718 by @swoboda1337
[mk2pvrouter] Add binary_sensor platform esphome#19719 by @FredM67 (new-feature) (new-platform)
[mk2pvrouter] Add text_sensor platform esphome#19720 by @FredM67 (new-feature) (new-platform)
[xiaomi_body_scale] Add Xiaomi body scale S200 and S400 esphome#16476 by @dckiller51 (new-component) (new-feature) (new-platform)
[ld2410][mqtt][packages][security] Mark string-valued secrets cv.sensitive esphome#19387 by @pleasantone
[nrf52] Reboot straight into the app on a 2001 baud touch esphome#19727 by @bdraco (new-feature)
[pn71xx] Fix NCI transport and card emulation bugs; share code between PN7150 and PN7160 esphome#19589 by @kbx81 (new-component)
[esp8266] Add native toolchain that builds the Arduino core without PlatformIO esphome#18539 by @bdraco (new-feature)
[pn532] Check InDataExchange status and fix tag handling esphome#19591 by @kbx81
[ci] Add the native ESP8266 compile smoke test esphome#19714 by @bdraco
[media_player] Name the player in the test automations so grouping works esphome#19741 by @bdraco
[tfluna] Name the shared bus in the test fixture so grouping works esphome#19742 by @bdraco
[lvgl] Ensure final animation frame completes before restart esphome#19642 by @catthetech
[pn532] Use register_apply_condition for pn532.is_writing esphome#19737 by @bdraco
[nrf52] Stream the SDK clone and resume it after an interruption esphome#19731 by @bdraco
[nrf52] Run analyze-memory on the sdk-nrf toolchain esphome#19730 by @bdraco
[hoermann_hcp] Add the motor’s serial number and firmware version as text sensors esphome#19543 by @RaHehl (new-feature) (new-platform)
[pn532] Remove runtime heap allocation from the frame and tag paths esphome#19744 by @kbx81
[hoermann_hcp] Add a door state text sensor esphome#19747 by @RaHehl (new-feature)
[counter] Add persistent counter sensor esphome#19746 by @clydebarrow (new-component) (new-feature) (new-platform)
[template][time] Add template time platform esphome#14838 by @ilikecake (new-feature) (new-platform)
[light] Shrink LightState by 12 bytes per light esphome#19711 by @bdraco
[core] Make the generated apply function a template argument of ApplyAction and ApplyCondition esphome#19655 by @bdraco
[core][sensor][binary_sensor][text_sensor][debug][xiaomi_rtcgq02lm] Add new_sub_sensor, new_sub_binary_sensor and new_sub_text_sensor helpers esphome#19725 by @bdraco
[ci] Compile esp8266 component tests with the native toolchain esphome#19740 by @bdraco
[light] Resume the previous effect on off/on esphome#17791 by @TheRealChriAnd (new-feature)
[nrf52] allow to download mcumgr image if exists esphome#19769 by @tomaszduda23
[nrf52] Fetch only the nRF Connect SDK projects a build needs esphome#19735 by @bdraco
[core][sensor][binary_sensor][text_sensor][button][switch][number][select][debug][xiaomi_rtcgq02lm][tfluna][ld2412] Bind sub entity config and parent once with sub_* helpers esphome#19754 by @bdraco
[ld2420] Use the sub_* helpers for optional child entities esphome#19776 by @bdraco
[scd30] Use the sub_* helpers for optional child entities esphome#19794 by @bdraco
[xiaomi_body_scale] Use the sub_* helpers for optional child entities esphome#19772 by @bdraco
[growatt_solar] Use the sub_* helpers for optional child entities esphome#19779 by @bdraco
[tcs34725] Use the sub_* helpers for optional child entities esphome#19797 by @bdraco
[ltr_als_ps] Use the sub_* helpers for optional child entities esphome#19780 by @bdraco
[hm3301] Use the sub_* helpers for optional child entities esphome#19795 by @bdraco
[atc_mithermometer] Use the sub_* helpers for optional child entities esphome#19787 by @bdraco
[veml7700] Use the sub_* helpers for optional child entities esphome#19778 by @bdraco
[seeed_mr60fda2] Use the sub_* helpers for optional child entities esphome#19799 by @bdraco
[bl0906] Use the sub_* helpers for optional child entities esphome#19796 by @bdraco
[pvvx_mithermometer] Use the sub_* helpers for optional child entities esphome#19788 by @bdraco
[nrf52] Test that the mcumgr image is offered beside a UF2 esphome#19804 by @bdraco
[bl0940] Use the sub_* helpers for optional child entities esphome#19783 by @bdraco
[ina219] Use the sub_* helpers for optional child entities esphome#19785 by @bdraco
[ld2410] Use the sub_* helpers for optional child entities esphome#19774 by @bdraco
[seeed_mr24hpc1] Use the sub_* helpers for optional child entities esphome#19798 by @bdraco
[ld2450] Use the sub_* helpers for optional child entities esphome#19775 by @bdraco
[ina226] Use the sub_* helpers for optional child entities esphome#19784 by @bdraco
[vbus] Use the sub_* helpers for optional child entities esphome#19755 by @bdraco
[cse7766] Use the sub_* helpers for optional child entities esphome#19782 by @bdraco
[pmsx003] Use the sub_* helpers for optional child entities esphome#19756 by @bdraco
[sy6970] Use the sub_* helpers for optional child entities esphome#19757 by @bdraco
[ruuvitag] Use the sub_* helpers for optional child entities esphome#19758 by @bdraco
[sps30] Use the sub_* helpers for optional child entities esphome#19759 by @bdraco
[ezo_pmp] Use the sub_* helpers for optional child entities esphome#19760 by @bdraco
[ina2xx_base] Use the sub_* helpers for optional child entities esphome#19761 by @bdraco
[sun_gtil2] Use the sub_* helpers for optional child entities esphome#19762 by @bdraco
[bl0939] Use the sub_* helpers for optional child entities esphome#19763 by @bdraco
[atm90e26] Use the sub_* helpers for optional child entities esphome#19764 by @bdraco
[havells_solar] Use the sub_* helpers for optional child entities esphome#19777 by @bdraco
[sdm_meter] Use the sub_* helpers for optional child entities esphome#19781 by @bdraco
[sgp30] Use the sub_* helpers for optional child entities esphome#19786 by @bdraco
[bthome_mithermometer] Use the sub_* helpers for optional child entities esphome#19789 by @bdraco
[xiaomi_hhccjcy01] Use the sub_* helpers for optional child entities esphome#19790 by @bdraco
[bl0942] Use the sub_* helpers for optional child entities esphome#19791 by @bdraco
[hlw8012] Use the sub_* helpers for optional child entities esphome#19792 by @bdraco
[airthings_wave_plus] Use the sub_* helpers for optional child entities esphome#19793 by @bdraco
[core] Share conversion rate configuration constant esphome#19800 by @techdregs
Bump bundled esphome-device-builder to 1.17.0 esphome#19814 by @esphome[bot]
[bme280_base] Use the sub_* helpers for optional child entities esphome#19812 by @bdraco
[airthings_wave_base] Use the sub_* helpers for optional child entities esphome#19811 by @bdraco
[mopeka_pro_check] Use the sub_* helpers for optional child entities esphome#19810 by @bdraco
[pzem004t] Use the sub_* helpers for optional child entities esphome#19809 by @bdraco
[pzemac] Use the sub_* helpers for optional child entities esphome#19808 by @bdraco
[ci] Refresh integration test durations esphome#19817 by @esphome[bot]
[ble_nus] Increase BLE MTU for NUS esphome#19629 by @tomaszduda23
[mqtt] fix compiler warnings when idf_send_async is used esphome#19815 by @patagonaa
[pn71xx] Remove heap allocation from tag handling and NCI transport esphome#19738 by @kbx81
[host] Build natively with ninja instead of PlatformIO esphome#19214 by @jesserockz (new-feature) (breaking-change)
[platformio] Fix ccache path for non-root containers esphome#19807 by @vonpanda
[hlw8032] Use the sub_* helpers for optional child entities esphome#19835 by @bdraco
[pzemdc] Use the sub_* helpers for optional child entities esphome#19834 by @bdraco
[wireguard] Use the sub_* helpers for optional child entities esphome#19833 by @bdraco
[qmc5883l] Use the sub_* helpers for optional child entities esphome#19832 by @bdraco
[tsl2591] Use the sub_* helpers for optional child entities esphome#19831 by @bdraco
Bump bundled esphome-device-builder to 1.17.1 esphome#19838 by @esphome[bot]
[nrf52] Use full newlib when the logger is enabled, disable unused serial and printk esphome#19766 by @tomaszduda23
[zephyr_mcumgr] add LED which is controled by bootloader esphome#16322 by @tomaszduda23 (new-feature)
[esp32] Precompile the core headers for ESP-IDF source compiles esphome#19820 by @bdraco
[esp8266] Precompile the prefix header on the native toolchain esphome#19821 by @bdraco
[host] Precompile the core headers on the native build esphome#19822 by @bdraco
[ci] Refresh integration test durations esphome#19847 by @esphome[bot]
[esp8266] Precompile the prefix header on PlatformIO builds esphome#19823 by @bdraco
[rp2] Enable the PlatformIO precompiled header esphome#19824 by @bdraco
[esp32] Enable the precompiled header on the PlatformIO toolchain esphome#19825 by @bdraco
[nrf52] Precompile the core headers on the sdk-nrf build esphome#19826 by @bdraco
Bump bundled esphome-device-builder to 1.17.2 esphome#19848 by @esphome[bot]
[libretiny] Enable the PlatformIO precompiled header on Linux hosts esphome#19827 by @bdraco
[split_buffer] Allow direct access to buffer chunks esphome#19819 by @clydebarrow
[esp32_hosted][esp32_ble] Support esp_hosted 3.x alongside 2.x, keep builds on 2.12.13 for now esphome#19621 by @swoboda1337
[mipi_rgb] Fix SWRESET delay for st7701s esphome#17646 by @clydebarrow
[ltr501] Use the sub_* helpers for optional child entities esphome#19867 by @bdraco
[thermopro_ble] Use the sub_* helpers for optional child entities esphome#19868 by @bdraco
[as5600] Use the sub_* helpers for optional child entities esphome#19869 by @bdraco
[xiaomi_lywsd03mmc] Use the sub_* helpers for optional child entities esphome#19870 by @bdraco
[sm300d2] Use the sub_* helpers for optional child entities esphome#19866 by @bdraco
[network] Keep lwip off the PSRAM tier when Ethernet is configured esphome#19367 by @bdraco
[epaper_spi] reTerminal Sticky: Four-level grayscale for SSD1677 panels, and a full-refresh action esphome#19213 by @FuNK3Y (new-feature) (breaking-change)
[rp2] Bump arduino-pico framework to 6.1.1 esphome#19881 by @bdraco
[speaker] Skip a playlist item that fails instead of retrying it forever esphome#19862 by @randybb
[dfrobot_sen0395] Fix output_latency treating milliseconds as seconds esphome#19873 by @cpruijsen
[speaker_source] Account for playback callbacks during speaker writes esphome#19499 by @n-IA-hane
[esp32][rp2][esp8266][libretiny]mask gpio flags (1/3) esphome#19393 by @luar123
[libretiny] Load the precompiled header on Apple Silicon Macs esphome#19857 by @bdraco
[esp8266] Use our own compiler builds for the native toolchain esphome#19849 by @bdraco (new-feature)
[esp8266] Use our own Arduino core builds for the native toolchain esphome#19876 by @bdraco
[core] Leave the precompiled header off on Windows for a GCC with bug 14940 esphome#19875 by @bdraco
[esp8266] Make the native arduino toolchain the default esphome#19886 by @bdraco (breaking-change)
[mopeka_std_check] Use the sub_* helpers for optional child entities esphome#19897 by @bdraco
[inkbird_ibsth1_mini] Use the sub_* helpers for optional child entities esphome#19896 by @bdraco
[ccs811] Use the sub_* helpers for optional child entities esphome#19895 by @bdraco
[hmc5883l] Use the sub_* helpers for optional child entities esphome#19893 by @bdraco
[htu21d] Use the sub_* helpers for optional child entities esphome#19894 by @bdraco
[espidf] Run cmake and ninja directly instead of through idf.py esphome#19871 by @bdraco
[socket] Let Zephyr clang-tidy see the BSD socket implementation esphome#19901 by @Bascht74
[core] Create the PlatformIO HTTP cache dir before the first registry lookup esphome#19906 by @bdraco
[nfc] Pass tags to triggers by reference and keep the listener list in static storage esphome#19902 by @kbx81
[lvgl] Animation updates and debug outline option esphome#19420 by @clydebarrow (new-feature)
[runtime_image] Improve format logs esphome#19903 by @guillempages
[web_server_idf] Send events straight from the caller’s buffers instead of a std::string esphome#19376 by @bdraco
[web_server_idf] Build state documents in a stack arena so a state event does no heap allocation esphome#19383 by @bdraco
[core] Add a line based yaml editor and use it for rename esphome#19410 by @bdraco
[nfc] Hold NDEF records in a fixed-size list esphome#19912 by @kbx81
[core] Extract native toolchain package archives in parallel esphome#18840 by @bdraco
[ethernet] Add KSZ8851SNL SPI ethernet support esphome#19883 by @jesserockz (new-feature)
[ens160_base] Use the sub_* helpers for optional child entities esphome#19921 by @bdraco
[emc2101] Use the sub_* helpers for optional child entities esphome#19920 by @bdraco
[xiaomi_hhccjcy10] Use the sub_* helpers for optional child entities esphome#19919 by @bdraco
[ld6002b] Use the sub_* helpers for optional child entities esphome#19918 by @bdraco
[bme680] Use the sub_* helpers for optional child entities esphome#19917 by @bdraco
[zigbee] Add cluster: device_class to expose ESP32 sensors via measurement clusters instead of Analog/Binary Input esphome#17388 by @luar123 (new-feature)
[kuntze] Use the sub_* helpers for optional child entities esphome#19926 by @bdraco
[ufm01] Use the sub_* helpers for optional child entities esphome#19927 by @bdraco
[alpha3] Use the sub_* helpers for optional child entities esphome#19928 by @bdraco
[uponor_smatrix] Use the sub_* helpers for optional child entities esphome#19929 by @bdraco
[max9611] Use the sub_* helpers for optional child entities esphome#19930 by @bdraco
[lvgl] Use contextvars to improve lvgl scheduling esphome#19242 by @clydebarrow
[modbus] Fix a format warning when logging the frame buffer size esphome#19934 by @bdraco
[dlms_meter] Fix a format warning when logging the receive timeout esphome#19935 by @bdraco
[api] Fix format warnings in the api test config esphome#19936 by @bdraco
[micro_wake_word] Fix a format warning when logging a model version mismatch esphome#19937 by @bdraco
[seeed_mr60bha2] Use the sub_* helpers for optional child entities esphome#19939 by @bdraco
[smt100] Use the sub_* helpers for optional child entities esphome#19940 by @bdraco
[mmc5603] Use the sub_* helpers for optional child entities esphome#19941 by @bdraco
[gdk101] Use the sub_* helpers for optional child entities esphome#19942 by @bdraco
[pmwcs3] Use the sub_* helpers for optional child entities esphome#19943 by @bdraco
[ufm01] Fix a format warning when logging the frame sync position esphome#19944 by @bdraco
[midea] Fix a format warning in the esp32 test config esphome#19946 by @bdraco
[json] Fix format truncation warnings in the arena tests esphome#19938 by @bdraco
[xdb401] Fix format warnings in the timing and raw pressure logs esphome#19945 by @bdraco
[core] Ignore empty CLI address cache entries esphome#19924 by @vonpanda
[espidf] Resolve cmake through the IDF environment when reading the CMake cache esphome#19947 by @bdraco
[audio_dac] Add a hook that runs once the I2S clocks are running esphome#19900 by @remcom
[serial_proxy] Never let a client write stall the main loop past a fixed budget esphome#19923 by @kbx81
[tas58xx] Add TAS58xx audio amplifier (TAS5805M) esphome#19595 by @remcom (new-component) (new-feature) (new-platform)
[mqtt] Stop disabling the mbedTLS hardware MPI accelerator for TLS esphome#19958 by @heythisisnate
[light] Fix white flash on turn-on during an effect, start strobe on its first color esphome#19916 by @clydebarrow
[zigbee] Implement switch support for esp32 esphome#17579 by @luar123 (new-feature)
[esp8266] Derive the native image header flash size from the linker script esphome#19961 by @bdraco
[bthome_mithermometer] Decode 0.1C temperature and 1% humidity objects esphome#19956 by @mtmatteo79 (new-feature)
Bump bundled esphome-device-builder to 1.18.0 esphome#19968 by @esphome[bot]
[core] Parse ESPHOME_SERIAL_LOGGING_RESET as a boolean esphome#19963 by @vonpanda
[ci] Pin SOURCE_DATE_EPOCH in the idf.py equivalence check esphome#19970 by @bdraco
[nrf52] Add nRF Connect SDK 3.4.0 / Zephyr 4.x support esphome#19863 by @tomaszduda23
[pmsa003i] Fix spurious component failures and warnings on power up esphome#19933 by @j9brown
[openthread] rewrite openthread esp.cpp to use new esp functions esphome#16334 by @rwrozelle
[noise] Generate the responder ephemeral key ahead of the handshake esphome#19000 by @bdraco
[espidf] Skip ldgen when only app code changes esphome#18857 by @bdraco
[socket] Add an IPv4 lookup next to set_sockaddr esphome#19909 by @Bascht74
[ina260] Use the sub_* helpers for optional child entities esphome#19977 by @bdraco
[midea] Use the sub_* helpers for optional child entities esphome#19976 by @bdraco
[xiaomi_mjyd02yla] Use the sub_* helpers for optional child entities esphome#19975 by @bdraco
[xiaomi_jqjcy01ym] Use the sub_* helpers for optional child entities esphome#19974 by @bdraco
[xiaomi_gcls002] Use the sub_* helpers for optional child entities esphome#19973 by @bdraco
[noise] Import noise-c and libsodium as ESP-IDF managed components esphome#18351 by @jesserockz
[resampler] Add resampler microphone platform esphome#19953 by @remcom (new-feature) (new-platform)
[ci] Balance component test batches by estimated build time esphome#19980 by @bdraco
[climate] Fix the restore state memset warning on every platform esphome#19983 by @bdraco
[display] Fix the null pointer comparison warning in the display log macro esphome#19984 by @bdraco
[speaker] Fix the fall through warning in the media player turn off command esphome#19987 by @bdraco
[uart] Fix a maybe uninitialized warning in the fixed size read esphome#19988 by @bdraco
[sensor] Fix a double promotion warning in the NTC resistance filter esphome#19985 by @bdraco
[light] Fix a double promotion warning in the light test config esphome#19989 by @bdraco
[mk2pvrouter] Fix an ignored qualifiers warning in the group length check esphome#19986 by @bdraco
[esp32_ble_tracker] Guard Bluedroid against stale queued connection requests esphome#19375 by @bdraco
[espidf] Add —skip-bootloader for OTA only builds esphome#19925 by @bdraco (new-feature)
[light] Add color option to strobe and other color state esphome#19874 by @clydebarrow (new-feature)
[ci] Skip the bootloader in the component batch build jobs esphome#19931 by @bdraco
Bump bundled esphome-device-builder to 1.19.0 esphome#19995 by @esphome[bot]
[stcc4] Add component for the Sensirion STCC4 CO2 sensor esphome#19434 by @j9brown (new-component) (new-feature) (new-platform)
[espidf] Mirror registry components locally so configures skip the registry esphome#19949 by @bdraco
[bluetooth_connection] Cancel pending Bluedroid opens on disconnect esphome#19859 by @michaelheichler
[socket] Add a reconnecting TCP client link esphome#19999 by @Bascht74
[espidf] Resolve the ESP-IDF tool paths once per build esphome#19996 by @bdraco
[espidf] Build all and size in one ninja run esphome#19997 by @bdraco
[espidf] Read the ESP-IDF version in process instead of starting idf_tools esphome#19998 by @bdraco
[substitutions] Support !include with a condition esphome#19455 by @j9brown (new-feature)
[socket] Compile the lookup and client link helpers only when required esphome#20002 by @bdraco
[core] Compile util.cpp only on MQTT builds esphome#20003 by @bdraco
[espidf] Skip the lwip sources that compile to empty objects esphome#20000 by @bdraco
[esphome][ota][core] Compress OTA uploads on ESP32, RP2040, LibreTiny and host esphome#19037 by @bdraco (new-feature)
[tcp_uart] Add a TCP client that implements a UART esphome#19884 by @Bascht74 (new-component) (new-feature)
[const] Move the role and reconnect interval keys to shared constants esphome#20009 by @bdraco
[wifi] Warn when eap is configured with esp32_hosted esphome#20011 by @swoboda1337
[ee895] Use the sub_* helpers for optional child entities esphome#20005 by @bdraco
[pm2005] Use the sub_* helpers for optional child entities esphome#20004 by @bdraco
[cs5460a] Use the sub_* helpers for optional child entities esphome#20006 by @bdraco
[socket] Move the outgoing buffer into the TCP client link esphome#20010 by @bdraco
[mmc5983] Use the sub_* helpers for optional child entities esphome#20007 by @bdraco
[zyaura] Use the sub_* helpers for optional child entities esphome#20008 by @bdraco
[core] Add new options suspend_loop and loop_interval esphome#18136 by @luar123 (new-feature)
[xiaomi_lywsd02mmc] Use the sub_* helpers for optional child entities esphome#20014 by @bdraco
[xiaomi_lywsd02] Use the sub_* helpers for optional child entities esphome#20015 by @bdraco
[xiaomi_lywsdcgq] Use the sub_* helpers for optional child entities esphome#20016 by @bdraco
[xiaomi_cgg1] Use the sub_* helpers for optional child entities esphome#20017 by @bdraco
[xiaomi_cgd1] Use the sub_* helpers for optional child entities esphome#20018 by @bdraco
[nrf52] Create the precompiled header in ccache depend mode esphome#20019 by @bdraco
[tcp_uart] Report a failed flush when the flush drops the link esphome#20013 by @bdraco
[uart_tcp] Add a hardware UART copied to one TCP socket esphome#19887 by @Bascht74 (new-component) (new-feature)
[xiaomi_mhoc303] Use the sub_* helpers for optional child entities esphome#20024 by @bdraco
[xiaomi_cgpr1] Use the sub_* helpers for optional child entities esphome#20023 by @bdraco
[xiaomi_xmwsdj04mmc] Use the sub_* helpers for optional child entities esphome#20022 by @bdraco
[xiaomi_mhoc401] Use the sub_* helpers for optional child entities esphome#20021 by @bdraco
[xiaomi_cgdk2] Use the sub_* helpers for optional child entities esphome#20020 by @bdraco
[socket] Add an IPv4 allow list esphome#20025 by @Bascht74
[es8388] Use the sub_* helpers for optional child entities esphome#20030 by @bdraco
[sht3xd] Use the sub_* helpers for optional child entities esphome#20031 by @bdraco
[mhz19] Use the sub_* helpers for optional child entities esphome#20032 by @bdraco
[shtcx] Use the sub_* helpers for optional child entities esphome#20033 by @bdraco
[atm90e32] Use the sub_* helpers for optional child entities esphome#20034 by @bdraco
[socket] Share the server side as TcpListener esphome#20037 by @Bascht74 (new-feature)
[aht10][am2315c][am2320][dht][dht12] Use the sub_* helpers for optional child entities esphome#20038 by @bdraco
[hdc1080][hdc2010][hdc2080][hdc302x][hte501] Use the sub_* helpers for optional child entities esphome#20039 by @bdraco
[nrf52] Use the shared managed ccache settings for the native build esphome#20027 by @bdraco
[bmp085][dps310][lps22][mpl3115a2][ms5611] Use the sub_* helpers for optional child entities esphome#20040 by @bdraco
[ags10][cm1106][sds011][pm1006][senseair] Use the sub_* helpers for optional child entities esphome#20041 by @bdraco
[bmi160][mpu6050][mpu6886][mlx90614][max31855] Use the sub_* helpers for optional child entities esphome#20042 by @bdraco
[ens210][htu31d][hyt271][honeywell_hih_i2c][ms8607] Use the sub_* helpers for optional child entities esphome#20043 by @bdraco
[honeywellabp][honeywellabp2_i2c][npi19][xgzp68xx][xdb401] Use the sub_* helpers for optional child entities esphome#20044 by @bdraco
[mcp9600][tem3200][kmeteriso][ufire_ec][ufire_ise] Use the sub_* helpers for optional child entities esphome#20045 by @bdraco
[lc709203f][max17043][pulse_counter][pulse_meter][duty_time] Use the sub_* helpers for optional child entities esphome#20046 by @bdraco
[xiaomi_hhccpot002][xiaomi_miscale][xiaomi_wx08zm][radon_eye_rd200][am43] Use the sub_* helpers for optional child entities esphome#20047 by @bdraco
[iaqcore][t6615][hc8][as3935][tx20] Use the sub_* helpers for optional child entities esphome#20048 by @bdraco
[rd03d][sim800l][tas58xx][bedjet][hoermann_hcp] Use the sub_* helpers for optional child entities esphome#20049 by @bdraco
[combination][libretiny][sound_level] Use the sub_* helpers for optional child entities esphome#20050 by @bdraco
[bmp280_base][bmp3xx_base][bmp581_base][spa06_base][mlx90393] Use the sub_* helpers for optional child entities esphome#20051 by @bdraco
[ethernet] Fix IPv6 SLAAC: link-local on link-up, pass all-nodes multicast esphome#19752 by @davidcoulson
[tcp_uart] Add a server role with an IPv4 allow list esphome#20026 by @Bascht74 (new-feature)
[wifi] Start IPv6 link-local on connect, not on DHCPv4 lease esphome#19749 by @davidcoulson
[const] Hoist the allowed IPs and connected keys to the shared constants esphome#20053 by @Bascht74
[qmi8658] Pin motion_id in test config to fix grouped component test conflict esphome#20075 by @bdraco
[font] Keep the glyph table in flash esphome#20079 by @bdraco
[lvgl] Reject ESP8266 at validation esphome#20099 by @bdraco
[es8311] Encode the REG02 MCLK pre-multiplier instead of writing the factor esphome#20121 by @abderbejaoui
[noise] Use the shared PROGMEM table helper for the PSK esphome#20101 by @bdraco
[voice_assistant] Group the one byte members at the end esphome#20147 by @bdraco
[microphone] Move bits_per_sample_ to the end of MicrophoneSource esphome#20146 by @bdraco
[mixer] Pack has_contributed_ next to pause_state_ esphome#20144 by @bdraco
[speaker] Pack mute_state_ next to state_ esphome#20143 by @bdraco
[i2s_audio] Pack pdm_ with the other microphone bools esphome#20145 by @bdraco
[sendspin] Pack mdns_advertised_ next to task_stack_in_psram_ esphome#20148 by @bdraco
[ring_buffer] Use the static ring buffer structure as its handle esphome#20134 by @bdraco
[http_request] Reduce log level for missing header esphome#18932 by @guillempages
[homeassistant] Use input_number.set_value for input_number entities esphome#19965 by @jesserockz
[ld2450] Pack direction_dedup_ after zone_config_ esphome#20152 by @bdraco
[rtttl] Pack state_ after wholenote_duration_ esphome#20151 by @bdraco
[ledc] Pack initialized_ next to bit_depth_ esphome#20150 by @bdraco
[template] Pack restore_value_ next to optimistic_ in TemplateNumber esphome#20149 by @bdraco
[wifi] Let the empty pending_ flags struct take no space esphome#20142 by @bdraco
[template] Use distinct empty types so both unused select members take no space esphome#20141 by @bdraco
[script] Let the empty argument tuple take no space for scripts without parameters esphome#20140 by @bdraco
[core] Let the empty Scheduler mutex take no space on single-threaded platforms esphome#20139 by @bdraco
[wifi] Place ap_ before the byte fields so they pack after it esphome#20138 by @bdraco
[improv_ble] Pack the byte fields into the padding after connecting_sta_ esphome#20137 by @bdraco
[esp32_ble] Group the one byte io_cap_ with the other byte fields esphome#20136 by @bdraco
[remote_receiver] Pack carrier_duty_percent_ next to with_dma_ esphome#20135 by @bdraco
[uart] Skip the parity setter when it matches the default esphome#20069 by @bdraco
[version] Skip the hide hash and hide timestamp setters when they match the defaults esphome#20067 by @bdraco
[api] Skip the listen backlog setter when it matches the default esphome#20066 by @bdraco
[core] Log ignored —skip-bootloader at debug level esphome#20059 by @bdraco
[web_server] Remove dead ESP-IDF event source connect callback and pack expose_log_ esphome#20130 by @bdraco
[esp32] Remove the unused loop_task_handle global esphome#20132 by @bdraco
[core] Use the static queue structure as the FreeRTOSQueue handle esphome#20133 by @bdraco
[web_server] Keep allowed origins in a shared flash table esphome#20086 by @bdraco
[matrix_keypad] Keep the keys in flash esphome#20110 by @bdraco
[select] Cover select.is in the component test esphome#20112 by @bdraco
[select] Keep select.is option lists in flash esphome#20108 by @bdraco
[udp] Keep addresses in a shared flash table esphome#20085 by @bdraco
[wifi] Keep a second fallback AP start from resetting the LN882x esphome#20168 by @bdraco
Bump bundled esphome-device-builder to 1.20.0 esphome#20172 by @esphome[bot]
[libretiny] Fix LN882x boot crash with the logger or a uart on UART0 esphome#20162 by @bdraco
[exponential_moving_average] Add EMA preserved across reboots esphome#19882 by @clydebarrow (new-component) (new-feature) (new-platform)
[mipi_rgb] Keep the init sequence in flash esphome#20090 by @bdraco
[mipi_dsi] Keep the init sequence in flash esphome#20091 by @bdraco
[mipi_spi] Keep the init sequence in flash esphome#20089 by @bdraco
[uart] Validate parity and stop bits correctly esphome#20161 by @makstech
[libretiny] Keep a scan that finds no networks from resetting the LN882x esphome#20169 by @bdraco
[esp32] Work around ESP-IDF stack bug on P4 esphome#20181 by @clydebarrow
[modbus] Reject send_wait_time and turnaround_time above 65535 ms esphome#20160 by @Bascht74
[tcp_uart][uart_tcp] Expose the no-arg load_settings() and mark UartTcp final esphome#20163 by @Bascht74
[socket][tcp_uart][uart_tcp] Reject an IPv6 host at config time esphome#20165 by @Bascht74
[esp32][api][noise] Resolve arduino’s libsodium requirement to the converted esphome/libsodium esphome#20185 by @swoboda1337
[emontx] Use total state class for energy sensors esphome#20128 by @FredM67
[ethernet] Store PHY registers in a StaticVector sized from the config esphome#20131 by @bdraco
[wifi] Keep ESP8266’s report of a replaced attempt from failing the next one esphome#20183 by @bdraco
[libretiny] Build LN882x with 1-byte enums to match the SDK’s WiFi library esphome#20173 by @bdraco
[wifi] Default LN882x power save to none, as on BK72xx and RTL87xx esphome#20170 by @bdraco
[wireguard] Bump the library to esphome/wireguard 0.4.7 esphome#20188 by @swoboda1337
[epaper_spi] Add SSD1681 and the Waveshare 1.54in V2 panel esphome#18073 by @snoack (new-feature)
[nrf52] Share the ccache between devices esphome#20028 by @bdraco
[api] Count packed varints a machine word at a time esphome#20122 by @bdraco
[remote_base] Keep RC switch protocols in flash esphome#20081 by @bdraco
[core] Decode base64 in a single pass esphome#20123 by @bdraco
[wifi] Connect LN882x to the BSSID asked for esphome#20174 by @bdraco
[libretiny] Flag the LN882H SDK default MAC esphome#20175 by @bdraco
[wifi] Leave the AP before an LN882x reboots esphome#20176 by @bdraco
[audio_file] Keep audio files in flash instead of building them in setup() esphome#20072 by @bdraco
[unicode][font] move extract_unicode_codepoint to new component esphome#19969 by @ssieb (new-component)
[usb_uart] Only compile the vendor drivers that are configured esphome#20190 by @bdraco
Bump bundled esphome-device-builder to 1.21.0 esphome#20199 by @esphome[bot]
[sx1509] Keep the keypad keys in flash esphome#20111 by @bdraco
[logger] Use the static ring buffer structure as its handle on ESP32 esphome#20129 by @bdraco
[core] [select] Keep select options in flash with a shared ConstVector esphome#20117 by @bdraco
[wifi] Run the LN882x fallback AP on its own instead of retrying AP+STA every loop esphome#20166 by @bdraco
[ble_device_base] Keep MAC filter lists in shared flash tables esphome#20088 by @bdraco
[lvgl] Remove redundant aexit override esphome#20201 by @Bascht74
[light] Cover get_effects() as published configs use it in the component test esphome#20203 by @bdraco
[ci] Run pylint when its version, dependencies or configuration change esphome#20202 by @Bascht74
[host] Ignore SIGPIPE so a write to a closed peer fails with EPIPE esphome#20228 by @Bascht74
[climate] Cover custom mode reads and runtime sets in the component test esphome#20208 by @bdraco
[fan] Cover preset mode reads and runtime sets in the component test esphome#20209 by @bdraco
[event] Cover how configs and components read and set event types in the component test esphome#20216 by @bdraco
[neopixelbus] Cover addressable_color_wipe with a random color on ESP8266 esphome#20221 by @bdraco
[web_server_idf] Respect explicit HTTP header limit esphome#18657 by @jeroen85
[api] Cover Home Assistant action fields in the api test config esphome#20236 by @bdraco
[zigbee] add missing tests esphome#20234 by @luar123
[espidf] Fix V1 ECDSA signed builds when skipping the bootloader esphome#20244 by @bdraco
[esphome] Revise warning text for password use esphome#20230 by @clydebarrow
[wireguard] Restart the connection while the peer is offline so the endpoint is re-resolved esphome#20231 by @swoboda1337
[ethernet] Pin the IDF version in the KSZ8851SNL test fixtures esphome#20245 by @swoboda1337
[sendspin] Require a type on the switch platform esphome#20189 by @kahrendt (breaking-change)
[socket] Add host tests for TcpClientLink and TcpListener esphome#20167 by @Bascht74
[tcp_uart] Keep received bytes readable after the connection drops esphome#20164 by @Bascht74
[i2s_audio] Park the speaker data-out pin low at setup esphome#20226 by @kbx81
[mipi_spi] Light platform for AMOLED display brightness esphome#20212 by @clydebarrow (new-feature) (new-platform)
[tas58xx] Add support for tas5825 dac esphome#19971 by @mrtoy-me (new-feature)
[esp32] Extract prefetched ESP-IDF tool archives in parallel esphome#18841 by @bdraco
[wireguard] Bump the library to esphome/wireguard 0.4.8 esphome#20246 by @swoboda1337
[motion] Add gesture detection esphome#16787 by @clydebarrow (new-feature) (new-platform)
[uart_tcp] Claim the UART, reject duplicate server ports, pace on loop_interval esphome#20180 by @Bascht74
[homeassistant] Add text, select and button platforms esphome#19964 by @jesserockz (new-feature) (new-platform)
[ci] Ignore esphome/idf_component.yml in external component bot esphome#20258 by @clydebarrow
[espectre] Add Wi-Fi CSI motion detection component esphome#19801 by @francescopace (new-component) (new-feature) (new-platform)
[mipi_spi] Add Waveshare ESP32-S3-Touch-LCD-1.46 SPD2010 model esphome#19056 by @grischard (new-feature)
[api] Add outgoing connections so the device can dial Home Assistant (or anything that implements native API) esphome#18919 by @bdraco (new-feature)
[ci] Run label checks in parallel instead of cancelling them esphome#20259 by @swoboda1337
[hoermann_hcp] Send each command once, and the lamp as a state esphome#19765 by @RaHehl (breaking-change)
[tcp_uart][uart_tcp] Add a disconnects sensor esphome#20096 by @Bascht74 (new-feature)
[zigbee] Add zigbee support for number on esp32 esphome#20243 by @luar123 (new-feature)
[sx126x] Cover shared constant and trigger argument send_packet payloads in the component test esphome#20272 by @bdraco
[espnow] Cover a send payload lambda that reads trigger arguments in the component test esphome#20270 by @bdraco
[sx127x] Cover shared constant, string and trigger argument send_packet payloads in the component test esphome#20274 by @bdraco
[udp] Cover identical constant and trigger argument write payloads in the component test esphome#20266 by @bdraco
[cc1101] Cover shared, string and trigger argument send_packet payloads in the component test esphome#20263 by @bdraco
[core] Test that if and while branches resume after delays, stops, nesting and script modes esphome#20282 by @bdraco
[esp32] Disable mbedTLS TLS and TLS-only crypto when no component needs them esphome#18877 by @bdraco
[espnow] Keep constant send payloads in shared flash tables esphome#20271 by @bdraco
[xiaomi_mccgq02hl] Add Xiaomi Mijia Door/Window Sensor 2 (MCCGQ02HL) esphome#20104 by @ahpohl (new-component) (new-feature) (new-platform)
[usb_host] iManufacturer and iProduct descriptor filters esphome#19095 by @puddly (new-feature) (breaking-change)
[api] Reply when an infrared/RF raw timings transmit has completed esphome#19086 by @bdraco (new-component)
[epaper_spi] Add is_updating condition esphome#20261 by @jesserockz (new-feature)
[serial_proxy] Add USB_SERIAL port type and device identity esphome#19308 by @puddly (new-feature)
[core] Select I/O expander pin providers by I2C address esphome#18939 by @clydebarrow (new-feature)
[audio_http][core] Add ca_certificate_path to audio_http media source esphome#19392 by @TheSwert (new-feature)
[api] Add a device wizard for Home Assistant onboarding esphome#19966 by @jesserockz (new-feature)
[core] Keep log tags in flash on ESP8266 with ESPHOME_LOG_TAG esphome#20290 by @bdraco
[core] Clone git PlatformIO packages in parallel in the prefetch esphome#18837 by @bdraco
[api] Keep the protobuf write cursor in a register and emit sub-message tags inline esphome#20124 by @bdraco
[api] Keep Home Assistant action fields in a flash table esphome#20237 by @bdraco
[sx127x] Keep constant send_packet payloads in shared flash tables esphome#20275 by @bdraco
[sx126x] Keep constant send_packet payloads in shared flash tables esphome#20273 by @bdraco
Bump aioesphomeapi from 46.6.0 to 46.7.0 esphome#20317 by @esphome[bot]
[tas58xx] Improve TAS5805M audio performance and use GPIO1 for TAS5825M faults esphome#20319 by @mrtoy-me
Bump aioesphomeapi from 46.7.0 to 46.8.0 esphome#20321 by @esphome[bot]
[core] Wake the main loop on its own task notification index on ESP32 esphome#20326 by @kbx81
[cc1101] Keep the remote_receiver interrupt on a shared GDO0 pin in begin_tx esphome#20296 by @dbuezas
Pin smp to 4.1.0 on Intel macOS so cbor2 installs from a wheel esphome#20302 by @bdraco
[core] Warn on every run that Intel Mac support ends by 2027.6.0 esphome#20303 by @bdraco
[api] Add a progmem option for bytes fields kept in flash esphome#20318 by @bdraco
[esp8266] Normalize misspelled boards and fall back to PlatformIO for unknown ones esphome#20322 by @bdraco
[core] Let cv.rename_key pass non-dict input through esphome#20331 by @jesserockz
Bump bundled esphome-device-builder to 1.22.0 esphome#20334 by @esphome[bot]
[combination] Use cv.rename_key for the deprecated coeffecient key esphome#20159 by @jesserockz
[noise] Bump noise-c to 0.1.31 and libsodium to 1.10021.12 esphome#20345 by @bdraco
[esp8266] Force-include the throw stubs into the core and libraries on the native toolchain esphome#20336 by @bdraco
[esp8266] Fix Arduino core regressions that keep data in RAM and link the unused unwinder esphome#20337 by @bdraco
[sendspin] Update to sendspin-cpp v0.9.3 esphome#20347 by @kahrendt (new-feature) (breaking-change)
[sendspin] Add the static pairing code, pairing window and unpaired access option esphome#20348 by @kahrendt (new-feature)
[sendspin] Add the dynamic pairing code esphome#20349 by @kahrendt (new-feature)
[sendspin] Add an unpaired access switch esphome#20350 by @kahrendt (new-feature)
Bump aioesphomeapi from 46.8.0 to 46.9.0 esphome#20358 by @esphome[bot]
[api][sendspin] Add a request for the Sendspin pairing token esphome#20355 by @kahrendt (new-feature)
[mdns] Bump espressif/mdns to 1.14.0 esphome#20383 by @bdraco
[ci] Pin the shared I2C bus in test configs that left it implicit esphome#20412 by @bdraco
[ci] Deal clang-tidy files across five shards esphome#20411 by @bdraco
[api] Fix C++ unit test link failure when api is only a dependency esphome#20418 by @bdraco
[esp32] Record the PC for cache error and interrupt watchdog crashes esphome#20415 by @bdraco
[ci] Stop the toolchain tests from installing ESP-IDF esphome#20413 by @bdraco
[ethernet] Collapse duplicate CI test variants esphome#20406 by @bdraco
[mcp23xxx_base] Keep the interrupt handler in IRAM on ESP8266 esphome#20409 by @bdraco
[ota] Collapse duplicate CI test variants esphome#20407 by @bdraco
[esp8266] Keep ArduinoJson’s float tables in flash (Arduino core 3.1.2-esphome.3) esphome#20416 by @bdraco
[ci] Refit component batch estimates to a full run esphome#20401 by @bdraco
[esp32_ble_client] Track conn_id per attempt and stop logging an error on a failed open esphome#20417 by @bdraco
[wifi] Use numeric scheduler ids instead of string names esphome#20357 by @bdraco
[mqtt] Use a numeric scheduler id for the deferred state publish esphome#20359 by @bdraco
[improv_serial] Use a numeric scheduler id for the Wi-Fi connect timeout esphome#20360 by @bdraco
[nrf52] Fake a larger flash in testing mode esphome#20439 by @bdraco
[esp32][libretiny] Skip registering static destructors that never run esphome#20440 by @bdraco
[ci] Keep bus group partners on the same runner esphome#20431 by @bdraco
[core] Pass a single condition to actions directly instead of wrapping it in a group esphome#19223 by @bdraco
Bump bundled esphome-device-builder to 1.23.0 esphome#20446 by @esphome[bot]
[zephyr_mcumgr] Enable MCUMGR_GRP_OS for UART transport, not just BLE esphome#18319 by @aalaei
[heatpumpir] Fix fan speeds for mitsubishi_msc protocol esphome#20460 by @r3wretrhy
[usb_host] Warn instead of failing when a device duplicates a usb_uart entry esphome#20373 by @bdraco
[teleinfo] Add predefined properties for main tags of TIC standard and historical esphome#9167 by @FredM67 (breaking-change)
[espidf] Clean the build when the IDF target changes esphome#20473 by @jabla
[core] Fix the native ESP8266 and host builds on Windows without ccache esphome#20468 by @bdraco
[nrf52] fix build error on 3.4.0 with pch ON esphome#20474 by @tomaszduda23
[tests] Close leftover server connections in the tcp_uart bridge and TCP client link tests esphome#20215 by @Bascht74
[nrf52] Fix BLE OTA/log device discovery & transport selection on macOS esphome#17101 by @anunayk
Bump bundled esphome-device-builder to 1.23.1 esphome#20497 by @esphome[bot]
[canbus] Fix high frame rates causing crashes due to unbounded iteration esphome#14481 by @fakuivan
[ci] Reset sdkconfig after ESP-IDF component discovery esphome#20511 by @clydebarrow
[teleinfo] Fix out-of-bounds read when splitting a frame into groups esphome#20513 by @FredM67
[uart_tcp] Prove the accept has run before checking what a new client receives esphome#20489 by @bdraco
[gree] Keep display light on by default for YAN/YAA/YAC/YAC1FB9 esphome#18516 by @sh1der
[seeed_mr24hpc1] Wait for the module to boot before sending UART traffic esphome#18860 by @heikkikii
[core] Copy trigger arguments in wait_until and script.wait esphome#20536 by @FredM67
[uart] Stop ESP8266 software serial RX ISR from blocking for a whole byte esphome#18519 by @bdraco
[usb_uart] Fix invalid stop bits and parity enum mappings esphome#20408 by @puddly
[nrf52] fix zigbee time component esphome#20527 by @tomaszduda23
[api] Let a wizard input pick multiple entities esphome#20537 by @jesserockz (new-feature)
[uart] Reuse the ISR pin argument on an ESP8266 software serial reload esphome#20541 by @Bascht74
Bump aioesphomeapi from 46.9.0 to 46.10.0 esphome#20563 by @esphome[bot]
[core] Create the PlatformIO HTTP cache dir before the prefetch resolve threads run esphome#20579 by @bdraco
[audio] Bump microFLAC to v0.3.0 esphome#20591 by @kahrendt
[wifi] Reject unsupported WPA3 on ESP8266 esphome#20592 by @Firat17aze
[rp2_pio] Use pioasm 4.1.0 so PIO programs run on RP2350 esphome#19260 by @emes30
[script] Keep the running script.wait item out of the queue while its chain runs esphome#20570 by @FredM67
[nrf52] Accept S140 7.2.0 and 7.3.0 in the sd140_v7 DFU package esphome#20661 by @tomaszduda23
[mdns] Advertise the connected interface in the network TXT record esphome#20673 by @kbx81
[web_server_idf] Keep active SSE sessions out of the LRU purge esphome#17383 by @anunayk
Bump aioesphomeapi from 46.10.0 to 46.11.0 esphome#20766 by @esphome[bot]
[mqtt] Match subscription topics in a loop instead of recursing per character esphome#20767 by @bdraco
[usb_uart] Expose interface_class and port_number esphome#20659 by @puddly (new-feature)
[noise] Initialize the protocol id’s reserved field for ESP-IDF 6.1 esphome#20779 by @bdraco
Bump aioesphomeapi from 46.11.0 to 46.12.0 esphome#20781 by @esphome[bot]
[api][sendspin] Add the Sendspin client id to the capabilities message esphome#20775 by @kahrendt
[esp32_ble_client] Value-initialize the connection parameters for ESP-IDF 6.1 esphome#20776 by @bdraco
[bluetooth_connection] Value-initialize the connection parameters for ESP-IDF 6.1 esphome#20774 by @bdraco
[mipi_rgb] Rotate pure RGB panels in software esphome#20757 by @swoboda1337
[epaper_spi] Ensure test card gets drawn esphome#20804 by @clydebarrow
Bump bundled esphome-device-builder to 1.24.0 esphome#20851 by @esphome[bot]
[esp32] Bump recommended ESP-IDF to 5.5.6 esphome#20987 by @swoboda1337
[debug] Log uptime in dump_config esphome#20989 by @swoboda1337
[tcp_uart] Expose the connection entities as platforms esphome#21009 by @bdraco (new-platform)
[uart_tcp] Expose the connection entities as platforms esphome#21008 by @bdraco (new-platform)
[bl0906] Read stale receive bytes instead of spinning on flush() esphome#21035 by @bdraco
[api] Poll the outgoing dial every loop on deep sleep builds esphome#21077 by @exciton
[api] Poll the outgoing dial every loop esphome#21085 by @exciton
Bump bundled esphome-device-builder to 1.25.0 esphome#21175 by @esphome[bot]
[ota] Accept an unknown image size in the RP2040 backend so web_server OTA works esphome#21178 by @bdraco
[web_server_idf] Reduce loopTask stack usage for state SSE esphome#21109 by @jeroen85
[core] Move zstd_module from the api wizard to esphome.helpers esphome#20342 by @bdraco
[web_server_idf] Increase HTTP server task stack to 4512 bytes esphome#21038 by @jeroen85

Dependency Changes

Bump ninja from 1.13.0 to 1.13.2 esphome#18952 by @dependabot[bot]
Bump zeroconf from 0.151.2 to 0.151.3 esphome#18951 by @dependabot[bot]
Bump filelock from 3.32.4 to 3.32.5 esphome#18963 by @dependabot[bot]
Bump platformdirs from 4.11.5 to 4.11.7 esphome#18976 by @dependabot[bot]
Bump prek from 0.5.0 to 0.5.1 esphome#18977 by @dependabot[bot]
Bump ruff from 0.16.5 to 0.16.6 esphome#19022 by @dependabot[bot]
Bump prek from 0.5.1 to 0.5.2 esphome#19021 by @dependabot[bot]
Bump esptool from 5.3.1 to 5.4.0 esphome#19023 by @dependabot[bot]
Bump astral-sh/setup-uv from 10.0.1 to 10.1.0 in /.github/actions/restore-python esphome#19313 by @dependabot[bot]
Bump github/codeql-action/init from 4.37.9 to 4.38.0 esphome#19315 by @dependabot[bot]
Bump github/codeql-action/analyze from 4.37.9 to 4.38.0 esphome#19314 by @dependabot[bot]
Bump astral-sh/setup-uv from 10.0.1 to 10.1.0 esphome#19312 by @dependabot[bot]
Bump ruff from 0.16.6 to 0.16.7 esphome#19310 by @dependabot[bot]
Bump platformdirs from 4.11.7 to 4.11.8 esphome#19309 by @dependabot[bot]
Bump filelock from 3.32.5 to 3.32.6 esphome#19311 by @dependabot[bot]
Update tzdata requirement from >=2026.3 to >=2026.4 esphome#19328 by @dependabot[bot]
Bump prek from 0.5.2 to 0.5.3 esphome#19358 by @dependabot[bot]
Bump codecov/codecov-action from 7.0.0 to 7.1.0 esphome#19382 by @dependabot[bot]
Bump docker/setup-buildx-action from 4.3.0 to 4.4.0 in the docker-actions group esphome#19404 by @dependabot[bot]
Bump docker/build-push-action from 7.3.0 to 7.4.0 in /.github/actions/build-image esphome#19403 by @dependabot[bot]
Bump platformdirs from 4.11.8 to 4.11.10 esphome#19443 by @dependabot[bot]
Bump codecov/codecov-action from 7.1.0 to 7.1.1 esphome#19446 by @dependabot[bot]
Bump ruff from 0.16.7 to 0.16.8 esphome#19441 by @dependabot[bot]
Bump filelock from 3.32.6 to 4.0.0 esphome#19442 by @dependabot[bot]
Bump esphome/workflows/.github/workflows/lock.yml from 2026.8.1 to 2026.9.0 esphome#19448 by @dependabot[bot]
Bump github/codeql-action/analyze from 4.38.0 to 4.38.1 esphome#19447 by @dependabot[bot]
Bump github/codeql-action/init from 4.38.0 to 4.38.1 esphome#19445 by @dependabot[bot]
Bump esphome/workflows/.github/workflows/stale.yml from a1c1485ab46ef41a84a6a9d8abd7fa4b7628fd70 to cc3e76de337dc59bc1cba8da58d963cd23b873f1 esphome#19444 by @dependabot[bot]
Bump filelock from 4.0.0 to 4.0.1 esphome#19464 by @dependabot[bot]
Bump platformdirs from 4.11.10 to 4.11.11 esphome#19465 by @dependabot[bot]
Bump click from 8.3.3 to 8.5.0 esphome#18925 by @dependabot[bot]
Bump astral-sh/setup-uv from 10.1.0 to 10.2.0 esphome#19594 by @dependabot[bot]
Bump astral-sh/setup-uv from 10.1.0 to 10.2.0 in /.github/actions/restore-python esphome#19593 by @dependabot[bot]
Update pyparsing requirement from >=3.3.2 to >=3.3.3 esphome#19592 by @dependabot[bot]
Bump platformdirs from 4.11.11 to 4.11.12 esphome#19668 by @dependabot[bot]
Bump filelock from 4.0.1 to 4.0.3 esphome#19852 by @dependabot[bot]
Bump pylint from 4.0.8 to 4.0.9 esphome#19853 by @dependabot[bot]
Bump github/codeql-action/init from 4.38.1 to 4.38.2 esphome#19855 by @dependabot[bot]
Bump platformdirs from 4.11.12 to 4.11.14 esphome#19854 by @dependabot[bot]
Bump github/codeql-action/analyze from 4.38.1 to 4.38.2 esphome#19856 by @dependabot[bot]
Bump ruff from 0.16.8 to 0.16.9 esphome#19851 by @dependabot[bot]
Bump flake8 from 7.3.0 to 7.4.1 esphome#19850 by @dependabot[bot]
Bump platformdirs from 4.11.14 to 4.12.0 esphome#19904 by @dependabot[bot]
Bump filelock from 4.0.3 to 4.0.4 esphome#19905 by @dependabot[bot]
Bump pytest-mock from 3.15.1 to 3.16.0 esphome#19952 by @dependabot[bot]
Bump filelock from 4.0.4 to 4.0.5 esphome#19991 by @dependabot[bot]
Bump zeroconf from 0.151.3 to 0.151.5 esphome#19992 by @dependabot[bot]
Bump platformdirs from 4.12.0 to 4.12.1 esphome#19994 by @dependabot[bot]
Bump prek from 0.5.3 to 0.5.4 esphome#19993 by @dependabot[bot]
Bump filelock from 4.0.5 to 4.0.6 esphome#20055 by @dependabot[bot]
Bump pylint from 4.0.9 to 4.0.10 esphome#20056 by @dependabot[bot]
Bump platformdirs from 4.12.1 to 4.12.2 esphome#20054 by @dependabot[bot]
Bump pre-commit-ci/lite-action from 1.1.0 to 1.2.0 esphome#20057 by @dependabot[bot]
Bump CodSpeedHQ/action from 5.2.1 to 5.4.0 esphome#20197 by @dependabot[bot]
Bump filelock from 4.0.6 to 4.0.9 esphome#20195 by @dependabot[bot]
Bump pylint from 4.0.10 to 4.1.1 esphome#20194 by @dependabot[bot]
Bump cryptography from 48.0.1 to 50.0.2 esphome#20193 by @dependabot[bot]
Bump ruff from 0.16.9 to 0.16.10 esphome#20196 by @dependabot[bot]
Bump smpclient from 7.2.0 to 7.3.0 esphome#17443 by @dependabot[bot]
Bump pylint from 4.1.1 to 4.1.2 esphome#20249 by @dependabot[bot]
Update tzdata requirement from >=2026.4 to >=2026.5 esphome#20250 by @dependabot[bot]
Bump filelock from 4.0.9 to 4.0.10 esphome#20298 by @dependabot[bot]
Bump platformdirs from 4.12.2 to 4.12.3 esphome#20297 by @dependabot[bot]