MCP9808 Temperature Sensor
The MCP9808 Temperature sensor allows you to use your MCP9808
(datasheet,
Adafruit) sensors with
ESPHome. The I²C Bus is
required to be set up in your configuration for this sensor to work.
# Example configuration entry
sensor:
- platform: mcp9808
name: "Living Room Temperature"
update_interval: 60s
Configuration variables:
temperature (Required): The information for the temperature sensor.
name (Required, string): The name for the temperature sensor.
id (Optional, ID): Set the ID of this sensor for use in lambdas.
All other options from Sensor.
address (Optional, int): Manually specify the I²C address of the sensor. Defaults to 0x18
.
update_interval (Optional, Time): The interval to check the sensor. Defaults to 60s
.