MS5611 Atmospheric Pressure Sensor

The ms5611 sensor platform allows you to use your MS5611 atmospheric pressure sensors (datasheet, hobbytronics) temperature and pressure sensors with esphomelib. The I²C is required to be set up in your configuration for this sensor to work.

https://d33wubrfki0l68.cloudfront.net/8755e84563be9c84a14bef2e4765f874ed93b266/13d7b/_images/ms5611-full.jpg

MS5611 Atmospheric Pressure Sensor

https://d33wubrfki0l68.cloudfront.net/260922a5212641faba73034ff5e1cb09195f7f5c/433a5/_images/ms5611-ui.png
# Example configuration entry
sensor:
  - platform: ms5611
    temperature:
      name: "Outside Temperature"
    pressure:
      name: "Outside Pressure"
    address: 0x77
    update_interval: 60s

Configuration variables:

  • pressure (Required): The information for the pressure sensor.
    • name (Required, string): The name for the pressure sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • temperature (Required): The information for the temperature. sensor
    • name (Required, string): The name for the temperature sensor.
    • id (Optional, ID): Set the ID of this sensor for use in lambdas.
    • All other options from Sensor and MQTT Component.
  • address (Optional, int): Manually specify the i^2c address of the sensor. Defaults to 0x77.
  • update_interval (Optional, Time): The interval to check the sensor. Defaults to 60s.