sx1509_registers.h

Go to the documentation of this file.

/*
sx1509_registers.h
Register definitions for SX1509.
Jim Lindblom @ SparkFun Electronics
Original Creation Date: September 21, 2015
https://github.com/sparkfun/SparkFun_SX1509_Arduino_Library
*/
#pragma once

namespace esphome {
namespace sx1509 {

const uint8_t REG_INPUT_DISABLE_B =
    0x00;  //    RegInputDisableB Input buffer disable register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_INPUT_DISABLE_A =
    0x01;  //    RegInputDisableA Input buffer disable register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_LONG_SLEW_B =
    0x02;  //    RegLongSlewB Output buffer long slew register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_LONG_SLEW_A = 0x03;  //    RegLongSlewA Output buffer long slew register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_LOW_DRIVE_B =
    0x04;  //    RegLowDriveB Output buffer low drive register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_LOW_DRIVE_A = 0x05;  //    RegLowDriveA Output buffer low drive register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_PULL_UP_B = 0x06;    //    RegPullUpB Pull_up register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_PULL_UP_A = 0x07;    //    RegPullUpA Pull_up register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_PULL_DOWN_B = 0x08;  //    RegPullDownB Pull_down register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_PULL_DOWN_A = 0x09;  //    RegPullDownA Pull_down register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_OPEN_DRAIN_B = 0x0A;  //    RegOpenDrainB Open drain register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_OPEN_DRAIN_A = 0x0B;  //    RegOpenDrainA Open drain register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_POLARITY_B = 0x0C;    //    RegPolarityB Polarity register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_POLARITY_A = 0x0D;    //    RegPolarityA Polarity register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_DIR_B = 0x0E;         //    RegDirB Direction register _ I/O[15_8] (Bank B) 1111 1111
const uint8_t REG_DIR_A = 0x0F;         //    RegDirA Direction register _ I/O[7_0] (Bank A) 1111 1111
const uint8_t REG_DATA_B = 0x10;        //    RegDataB Data register _ I/O[15_8] (Bank B) 1111 1111*
const uint8_t REG_DATA_A = 0x11;        //    RegDataA Data register _ I/O[7_0] (Bank A) 1111 1111*
const uint8_t REG_INTERRUPT_MASK_B =
    0x12;  //    RegInterruptMaskB Interrupt mask register _ I/O[15_8] (Bank B) 1111 1111
const uint8_t REG_INTERRUPT_MASK_A =
    0x13;                               //    RegInterruptMaskA Interrupt mask register _ I/O[7_0] (Bank A) 1111 1111
const uint8_t REG_SENSE_HIGH_B = 0x14;  //    RegSenseHighB Sense register for I/O[15:12] 0000 0000
const uint8_t REG_SENSE_LOW_B = 0x15;   //    RegSenseLowB Sense register for I/O[11:8] 0000 0000
const uint8_t REG_SENSE_HIGH_A = 0x16;  //    RegSenseHighA Sense register for I/O[7:4] 0000 0000
const uint8_t REG_SENSE_LOW_A = 0x17;   //    RegSenseLowA Sense register for I/O[3:0] 0000 0000
const uint8_t REG_INTERRUPT_SOURCE_B =
    0x18;  //    RegInterruptSourceB Interrupt source register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_INTERRUPT_SOURCE_A =
    0x19;  //    RegInterruptSourceA Interrupt source register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_EVENT_STATUS_B = 0x1A;   //    RegEventStatusB Event status register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_EVENT_STATUS_A = 0x1B;   //    RegEventStatusA Event status register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_LEVEL_SHIFTER_1 = 0x1C;  //    RegLevelShifter1 Level shifter register 0000 0000
const uint8_t REG_LEVEL_SHIFTER_2 = 0x1D;  //    RegLevelShifter2 Level shifter register 0000 0000
const uint8_t REG_CLOCK = 0x1E;            //    RegClock Clock management register 0000 0000
const uint8_t REG_MISC = 0x1F;             //    RegMisc Miscellaneous device settings register 0000 0000
const uint8_t REG_LED_DRIVER_ENABLE_B =
    0x20;  //    RegLEDDriverEnableB LED driver enable register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_LED_DRIVER_ENABLE_A =
    0x21;  //    RegLEDDriverEnableA LED driver enable register _ I/O[7_0] (Bank A) 0000 0000
// Debounce and Keypad Engine
const uint8_t REG_DEBOUNCE_CONFIG = 0x22;  //    RegDebounceConfig Debounce configuration register 0000 0000
const uint8_t REG_DEBOUNCE_ENABLE_B =
    0x23;  //    RegDebounceEnableB Debounce enable register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_DEBOUNCE_ENABLE_A =
    0x24;                               //    RegDebounceEnableA Debounce enable register _ I/O[7_0] (Bank A) 0000 0000
const uint8_t REG_KEY_CONFIG_1 = 0x25;  //    RegKeyConfig1 Key scan configuration register 0000 0000
const uint8_t REG_KEY_CONFIG_2 = 0x26;  //    RegKeyConfig2 Key scan configuration register 0000 0000
const uint8_t REG_KEY_DATA_1 = 0x27;    //    RegKeyData1 Key value (column) 1111 1111
const uint8_t REG_KEY_DATA_2 = 0x28;    //    RegKeyData2 Key value (row) 1111 1111
// LED Driver (PWM, blinking, breathing)
const uint8_t REG_I_ON_0 = 0x2A;   //    RegIOn0 ON intensity register for I/O[0] 1111 1111
const uint8_t REG_I_ON_1 = 0x2D;   //    RegIOn1 ON intensity register for I/O[1] 1111 1111
const uint8_t REG_I_ON_2 = 0x30;   //    RegIOn2 ON intensity register for I/O[2] 1111 1111
const uint8_t REG_I_ON_3 = 0x33;   //    RegIOn3 ON intensity register for I/O[3] 1111 1111
const uint8_t REG_I_ON_4 = 0x36;   //    RegIOn4 ON intensity register for I/O[4] 1111 1111
const uint8_t REG_I_ON_5 = 0x3B;   //    RegIOn5 ON intensity register for I/O[5] 1111 1111
const uint8_t REG_I_ON_6 = 0x40;   //    RegIOn6 ON intensity register for I/O[6] 1111 1111
const uint8_t REG_I_ON_7 = 0x45;   //    RegIOn7 ON intensity register for I/O[7] 1111 1111
const uint8_t REG_I_ON_8 = 0x4A;   //    RegIOn8 ON intensity register for I/O[8] 1111 1111
const uint8_t REG_I_ON_9 = 0x4D;   //    RegIOn9 ON intensity register for I/O[9] 1111 1111
const uint8_t REG_I_ON_10 = 0x50;  //    RegIOn10 ON intensity register for I/O[10] 1111 1111
const uint8_t REG_I_ON_11 = 0x53;  //    RegIOn11 ON intensity register for I/O[11] 1111 1111
const uint8_t REG_I_ON_12 = 0x56;  //    RegIOn12 ON intensity register for I/O[12] 1111 1111
const uint8_t REG_I_ON_13 = 0x5B;  //    RegIOn13 ON intensity register for I/O[13] 1111 1111
const uint8_t REG_I_ON_14 = 0x60;  //    RegIOn14 ON intensity register for I/O[14] 1111 1111
const uint8_t REG_I_ON_15 = 0x65;  //    RegIOn15 ON intensity register for I/O[15] 1111 1111
//     Miscellaneous
const uint8_t REG_HIGH_INPUT_B = 0x69;  //    RegHighInputB High input enable register _ I/O[15_8] (Bank B) 0000 0000
const uint8_t REG_HIGH_INPUT_A = 0x6A;  //    RegHighInputA High input enable register _ I/O[7_0] (Bank A) 0000 0000
//  Software Reset
const uint8_t REG_RESET = 0x7D;   //    RegReset Software reset register 0000 0000
const uint8_t REG_TEST_1 = 0x7E;  //    RegTest1 Test register 0000 0000
const uint8_t REG_TEST_2 = 0x7F;  //    RegTest2 Test register 0000 0000

}  // namespace sx1509
}  // namespace esphome