Data Structures
class	BedJetClient

class	BedJetClimate

class	BedjetCodec
	This class is responsible for encoding command packets and decoding status packets. More...

class	BedJetFan

class	BedJetHub
	Hub component connecting to the BedJet device over Bluetooth. More...

struct	BedjetPacket

class	BedjetSensor

struct	BedjetStatusPacket
	The format of a BedJet V3 status packet. More...

Enumerations
enum	BedjetPacketFormat : uint8_t { PACKET_FORMAT_DEBUG = 0x05, PACKET_FORMAT_V3_HOME = 0x56 }

enum	BedjetPacketType : uint8_t { PACKET_TYPE_STATUS = 0x1, PACKET_TYPE_DEBUG = 0x2 }

enum	BedjetNotification : uint8_t { NOTIFY_NONE = 0, NOTIFY_FILTER = 1, NOTIFY_UPDATE = 2, NOTIFY_UPDATE_FAIL = 3, NOTIFY_BIO_FAIL_CLOCK_NOT_SET = 4, NOTIFY_BIO_FAIL_TOO_LONG = 5 }

enum	BedjetMode : uint8_t { MODE_STANDBY = 0, MODE_HEAT = 1, MODE_TURBO = 2, MODE_EXTHT = 3, MODE_COOL = 4, MODE_DRY = 5, MODE_WAIT = 6 }

enum	BedjetHeatMode { HEAT_MODE_HEAT, HEAT_MODE_EXTENDED }
	Optional heating strategies to use for climate::CLIMATE_MODE_HEAT. More...

enum	BedjetTemperatureSource { TEMPERATURE_SOURCE_OUTLET, TEMPERATURE_SOURCE_AMBIENT }

enum	BedjetButton : uint8_t { BTN_OFF = 0x1, BTN_COOL = 0x2, BTN_HEAT = 0x3, BTN_TURBO = 0x4, BTN_DRY = 0x5, BTN_EXTHT = 0x6, BTN_M1 = 0x20, BTN_M2 = 0x21, BTN_M3 = 0x22, MAGIC_DEBUG_ON = 0x40, MAGIC_DEBUG_OFF = 0x41, MAGIC_CONNTEST = 0x42, MAGIC_UPDATE = 0x43, MAGIC_NOTIFY_ACK = 0x52 }

enum	BedjetCommand : uint8_t { CMD_BUTTON = 0x1, CMD_SET_RUNTIME = 0x2, CMD_SET_TEMP = 0x3, CMD_STATUS = 0x6, CMD_SET_FAN = 0x7, CMD_SET_CLOCK = 0x8 }

Functions
float	bedjet_temp_to_f (const uint8_t temp)
	Converts a BedJet temp step into degrees Fahrenheit. More...

float	bedjet_temp_to_c (uint8_t temp)
	Converts a BedJet temp step into degrees Celsius. More...

struct esphome::bedjet::BedjetStatusPacket	__attribute__ ((packed))

Variables
class esphome::bedjet::BedjetCodec	__attribute__

Enumeration Type Documentation

◆ BedjetButton

enum esphome::bedjet::BedjetButton : uint8_t

Enumerator
BTN_OFF	Turn BedJet off.
BTN_COOL	Enter Cool mode (fan only)
BTN_HEAT	Enter Heat mode (limited to 4 hours)
BTN_TURBO	Enter Turbo mode (high heat, limited to 10 minutes)
BTN_DRY	Enter Dry mode (high speed, no heat)
BTN_EXTHT	Enter Extended Heat mode (limited to 10 hours)
BTN_M1	Start the M1 biorhythm/preset program.
BTN_M2	Start the M2 biorhythm/preset program.
BTN_M3	Start the M3 biorhythm/preset program.
MAGIC_DEBUG_ON	Turn debug mode on/off.
MAGIC_DEBUG_OFF
MAGIC_CONNTEST	Perform a connection test.
MAGIC_UPDATE	Request a firmware update. This will also restart the Bedjet.
MAGIC_NOTIFY_ACK	Acknowledge notification handled. See BedjetNotify.

Definition at line 51 of file bedjet_const.h.

◆ BedjetCommand

enum esphome::bedjet::BedjetCommand : uint8_t

Enumerator
CMD_BUTTON
CMD_SET_RUNTIME
CMD_SET_TEMP
CMD_STATUS
CMD_SET_FAN
CMD_SET_CLOCK

Definition at line 85 of file bedjet_const.h.

◆ BedjetHeatMode

enum esphome::bedjet::BedjetHeatMode

Optional heating strategies to use for climate::CLIMATE_MODE_HEAT.

Enumerator
HEAT_MODE_HEAT	HVACMode.HEAT is handled using BTN_HEAT (default)
HEAT_MODE_EXTENDED	HVACMode.HEAT is handled using BTN_EXTHT.

Definition at line 36 of file bedjet_const.h.

◆ BedjetMode

enum esphome::bedjet::BedjetMode : uint8_t

Enumerator
MODE_STANDBY	BedJet is Off.
MODE_HEAT	BedJet is in Heat mode (limited to 4 hours)
MODE_TURBO	BedJet is in Turbo mode (high heat, limited time)
MODE_EXTHT	BedJet is in Extended Heat mode (limited to 10 hours)
MODE_COOL	BedJet is in Cool mode (actually "Fan only" mode)
MODE_DRY	BedJet is in Dry mode (high speed, no heat)
MODE_WAIT	BedJet is in "wait" mode, a step during a biorhythm program.

Definition at line 18 of file bedjet_const.h.

◆ BedjetNotification

enum esphome::bedjet::BedjetNotification : uint8_t

Enumerator
NOTIFY_NONE	No notification pending.
NOTIFY_FILTER	Clean Filter / Please check BedJet air filter and clean if necessary.
NOTIFY_UPDATE	Firmware Update / A newer version of firmware is available.
NOTIFY_UPDATE_FAIL	Firmware Update / Unable to connect to the firmware update server.
NOTIFY_BIO_FAIL_CLOCK_NOT_SET	The specified sequence cannot be run because the clock is not set.
NOTIFY_BIO_FAIL_TOO_LONG	The specified sequence cannot be run because it contains steps that would be too long running from the current time.

Definition at line 27 of file bedjet_codec.h.

◆ BedjetPacketFormat

enum esphome::bedjet::BedjetPacketFormat : uint8_t

Enumerator
PACKET_FORMAT_DEBUG
PACKET_FORMAT_V3_HOME

Definition at line 17 of file bedjet_codec.h.

◆ BedjetPacketType

enum esphome::bedjet::BedjetPacketType : uint8_t

Enumerator
PACKET_TYPE_STATUS
PACKET_TYPE_DEBUG

Definition at line 22 of file bedjet_codec.h.

◆ BedjetTemperatureSource

enum esphome::bedjet::BedjetTemperatureSource

Enumerator
TEMPERATURE_SOURCE_OUTLET
TEMPERATURE_SOURCE_AMBIENT

Definition at line 44 of file bedjet_const.h.

Function Documentation

◆ attribute()

struct esphome::bedjet::BedjetStatusPacket esphome::bedjet::__attribute__ ( (packed) )

◆ bedjet_temp_to_c()

float esphome::bedjet::bedjet_temp_to_c ( uint8_t temp )

Converts a BedJet temp step into degrees Celsius.

Definition at line 163 of file bedjet_codec.cpp.

◆ bedjet_temp_to_f()

float esphome::bedjet::bedjet_temp_to_f ( const uint8_t temp )

Converts a BedJet temp step into degrees Fahrenheit.

Definition at line 9 of file bedjet_codec.cpp.

Variable Documentation

◆ attribute

enum esphome::bedjet::BedjetMode esphome::bedjet::__attribute__

Data Structures

Enumerations

Functions

Variables