#include <thermostat_climate.h>

Inheritance diagram for esphome::thermostat::ThermostatClimate:

Public Member Functions
	ThermostatClimate ()

void	setup () override

void	dump_config () override

void	loop () override

void	set_default_preset (const std::string &custom_preset)

void	set_default_preset (climate::ClimatePreset preset)

void	set_on_boot_restore_from (thermostat::OnBootRestoreFrom on_boot_restore_from)

void	set_set_point_minimum_differential (float differential)

void	set_cool_deadband (float deadband)

void	set_cool_overrun (float overrun)

void	set_heat_deadband (float deadband)

void	set_heat_overrun (float overrun)

void	set_supplemental_cool_delta (float delta)

void	set_supplemental_heat_delta (float delta)

void	set_cooling_maximum_run_time_in_sec (uint32_t time)

void	set_heating_maximum_run_time_in_sec (uint32_t time)

void	set_cooling_minimum_off_time_in_sec (uint32_t time)

void	set_cooling_minimum_run_time_in_sec (uint32_t time)

void	set_fan_mode_minimum_switching_time_in_sec (uint32_t time)

void	set_fanning_minimum_off_time_in_sec (uint32_t time)

void	set_fanning_minimum_run_time_in_sec (uint32_t time)

void	set_heating_minimum_off_time_in_sec (uint32_t time)

void	set_heating_minimum_run_time_in_sec (uint32_t time)

void	set_idle_minimum_time_in_sec (uint32_t time)

void	set_sensor (sensor::Sensor *sensor)

void	set_humidity_sensor (sensor::Sensor *humidity_sensor)

void	set_use_startup_delay (bool use_startup_delay)

void	set_supports_auto (bool supports_auto)

void	set_supports_heat_cool (bool supports_heat_cool)

void	set_supports_cool (bool supports_cool)

void	set_supports_dry (bool supports_dry)

void	set_supports_fan_only (bool supports_fan_only)

void	set_supports_fan_only_action_uses_fan_mode_timer (bool fan_only_action_uses_fan_mode_timer)

void	set_supports_fan_only_cooling (bool supports_fan_only_cooling)

void	set_supports_fan_with_cooling (bool supports_fan_with_cooling)

void	set_supports_fan_with_heating (bool supports_fan_with_heating)

void	set_supports_heat (bool supports_heat)

void	set_supports_fan_mode_on (bool supports_fan_mode_on)

void	set_supports_fan_mode_off (bool supports_fan_mode_off)

void	set_supports_fan_mode_auto (bool supports_fan_mode_auto)

void	set_supports_fan_mode_low (bool supports_fan_mode_low)

void	set_supports_fan_mode_medium (bool supports_fan_mode_medium)

void	set_supports_fan_mode_high (bool supports_fan_mode_high)

void	set_supports_fan_mode_middle (bool supports_fan_mode_middle)

void	set_supports_fan_mode_focus (bool supports_fan_mode_focus)

void	set_supports_fan_mode_diffuse (bool supports_fan_mode_diffuse)

void	set_supports_fan_mode_quiet (bool supports_fan_mode_quiet)

void	set_supports_swing_mode_both (bool supports_swing_mode_both)

void	set_supports_swing_mode_horizontal (bool supports_swing_mode_horizontal)

void	set_supports_swing_mode_off (bool supports_swing_mode_off)

void	set_supports_swing_mode_vertical (bool supports_swing_mode_vertical)

void	set_supports_two_points (bool supports_two_points)

void	set_preset_config (climate::ClimatePreset preset, const ThermostatClimateTargetTempConfig &config)

void	set_custom_preset_config (const std::string &name, const ThermostatClimateTargetTempConfig &config)

Trigger *	get_cool_action_trigger () const

Trigger *	get_supplemental_cool_action_trigger () const

Trigger *	get_dry_action_trigger () const

Trigger *	get_fan_only_action_trigger () const

Trigger *	get_heat_action_trigger () const

Trigger *	get_supplemental_heat_action_trigger () const

Trigger *	get_idle_action_trigger () const

Trigger *	get_auto_mode_trigger () const

Trigger *	get_cool_mode_trigger () const

Trigger *	get_dry_mode_trigger () const

Trigger *	get_fan_only_mode_trigger () const

Trigger *	get_heat_mode_trigger () const

Trigger *	get_off_mode_trigger () const

Trigger *	get_fan_mode_on_trigger () const

Trigger *	get_fan_mode_off_trigger () const

Trigger *	get_fan_mode_auto_trigger () const

Trigger *	get_fan_mode_low_trigger () const

Trigger *	get_fan_mode_medium_trigger () const

Trigger *	get_fan_mode_high_trigger () const

Trigger *	get_fan_mode_middle_trigger () const

Trigger *	get_fan_mode_focus_trigger () const

Trigger *	get_fan_mode_diffuse_trigger () const

Trigger *	get_fan_mode_quiet_trigger () const

Trigger *	get_swing_mode_both_trigger () const

Trigger *	get_swing_mode_horizontal_trigger () const

Trigger *	get_swing_mode_off_trigger () const

Trigger *	get_swing_mode_vertical_trigger () const

Trigger *	get_temperature_change_trigger () const

Trigger *	get_preset_change_trigger () const

float	cool_deadband ()
	Get current hysteresis values. More...

float	cool_overrun ()

float	heat_deadband ()

float	heat_overrun ()

void	refresh ()
	Call triggers based on updated climate states (modes/actions) More...

bool	climate_action_change_delayed ()
	Returns true if a climate action/fan mode transition is being delayed. More...

bool	fan_mode_change_delayed ()

climate::ClimateAction	delayed_climate_action ()
	Returns the climate action that is being delayed (check climate_action_change_delayed(), first!) More...

climate::ClimateFanMode	locked_fan_mode ()
	Returns the fan mode that is locked in (check fan_mode_change_delayed(), first!) More...

bool	hysteresis_valid ()
	Set point and hysteresis validation. More...

void	validate_target_temperature ()

void	validate_target_temperatures ()

void	validate_target_temperature_low ()

void	validate_target_temperature_high ()

Public Member Functions inherited from esphome::climate::Climate
	Climate ()

void	add_on_state_callback (std::function< void(Climate &)> &&callback)
	Add a callback for the climate device state, each time the state of the climate device is updated (using publish_state), this callback will be called. More...

void	add_on_control_callback (std::function< void(ClimateCall &)> &&callback)
	Add a callback for the climate device configuration; each time the configuration parameters of a climate device is updated (using perform() of a ClimateCall), this callback will be called, before any on_state callback. More...

ClimateCall	make_call ()
	Make a climate device control call, this is used to control the climate device, see the ClimateCall description for more info. More...

void	publish_state ()
	Publish the state of the climate device, to be called from integrations. More...

ClimateTraits	get_traits ()
	Get the traits of this climate device with all overrides applied. More...

void	set_visual_min_temperature_override (float visual_min_temperature_override)

void	set_visual_max_temperature_override (float visual_max_temperature_override)

void	set_visual_temperature_step_override (float target, float current)

void	set_visual_min_humidity_override (float visual_min_humidity_override)

void	set_visual_max_humidity_override (float visual_max_humidity_override)

Public Member Functions inherited from esphome::EntityBase
const StringRef &	get_name () const

void	set_name (const char *name)

bool	has_own_name () const

std::string	get_object_id () const

void	set_object_id (const char *object_id)

uint32_t	get_object_id_hash ()

bool	is_internal () const

void	set_internal (bool internal)

bool	is_disabled_by_default () const

void	set_disabled_by_default (bool disabled_by_default)

EntityCategory	get_entity_category () const

void	set_entity_category (EntityCategory entity_category)

std::string	get_icon () const

void	set_icon (const char *icon)

Public Member Functions inherited from esphome::Component
virtual float	get_setup_priority () const
	priority of setup(). More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Protected Member Functions
void	control (const climate::ClimateCall &call) override
	Override control to change settings of the climate device. More...

void	change_preset_ (climate::ClimatePreset preset)
	Change to a provided preset setting; will reset temperature, mode, fan, and swing modes accordingly. More...

void	change_custom_preset_ (const std::string &custom_preset)
	Change to a provided custom preset setting; will reset temperature, mode, fan, and swing modes accordingly. More...

bool	change_preset_internal_ (const ThermostatClimateTargetTempConfig &config)
	Applies the temperature, mode, fan, and swing modes of the provided config. More...

climate::ClimateTraits	traits () override
	Return the traits of this controller. More...

climate::ClimateAction	compute_action_ (bool ignore_timers=false)
	Re-compute the required action of this climate controller. More...

climate::ClimateAction	compute_supplemental_action_ ()

void	switch_to_action_ (climate::ClimateAction action, bool publish_state=true)
	Switch the climate device to the given climate action. More...

void	switch_to_supplemental_action_ (climate::ClimateAction action)

void	trigger_supplemental_action_ ()

void	switch_to_fan_mode_ (climate::ClimateFanMode fan_mode, bool publish_state=true)
	Switch the climate device to the given climate fan mode. More...

void	switch_to_mode_ (climate::ClimateMode mode, bool publish_state=true)
	Switch the climate device to the given climate mode. More...

void	switch_to_swing_mode_ (climate::ClimateSwingMode swing_mode, bool publish_state=true)
	Switch the climate device to the given climate swing mode. More...

void	check_temperature_change_trigger_ ()
	Check if the temperature change trigger should be called. More...

bool	idle_action_ready_ ()
	Is the action ready to be called? Returns true if so. More...

bool	cooling_action_ready_ ()

bool	drying_action_ready_ ()

bool	fan_mode_ready_ ()

bool	fanning_action_ready_ ()

bool	heating_action_ready_ ()

void	start_timer_ (ThermostatClimateTimerIndex timer_index)
	Start/cancel/get status of climate action timer. More...

bool	cancel_timer_ (ThermostatClimateTimerIndex timer_index)

bool	timer_active_ (ThermostatClimateTimerIndex timer_index)

uint32_t	timer_duration_ (ThermostatClimateTimerIndex timer_index)

std::function< void()>	timer_cbf_ (ThermostatClimateTimerIndex timer_index)

void	cooling_max_run_time_timer_callback_ ()
	set_timeout() callbacks for various actions (see above) More...

void	cooling_off_timer_callback_ ()

void	cooling_on_timer_callback_ ()

void	fan_mode_timer_callback_ ()

void	fanning_off_timer_callback_ ()

void	fanning_on_timer_callback_ ()

void	heating_max_run_time_timer_callback_ ()

void	heating_off_timer_callback_ ()

void	heating_on_timer_callback_ ()

void	idle_on_timer_callback_ ()

bool	cooling_required_ ()
	Check if cooling/fanning/heating actions are required; returns true if so. More...

bool	fanning_required_ ()

bool	heating_required_ ()

bool	supplemental_cooling_required_ ()

bool	supplemental_heating_required_ ()

void	dump_preset_config_ (const char *preset_name, const ThermostatClimateTargetTempConfig &config, bool is_default_preset)

Protected Member Functions inherited from esphome::climate::Climate
bool	set_fan_mode_ (ClimateFanMode mode)
	Set fan mode. Reset custom fan mode. Return true if fan mode has been changed. More...

bool	set_custom_fan_mode_ (const std::string &mode)
	Set custom fan mode. Reset primary fan mode. Return true if fan mode has been changed. More...

bool	set_preset_ (ClimatePreset preset)
	Set preset. Reset custom preset. Return true if preset has been changed. More...

bool	set_custom_preset_ (const std::string &preset)
	Set custom preset. Reset primary preset. Return true if preset has been changed. More...

optional< ClimateDeviceRestoreState >	restore_state_ ()
	Restore the state of the climate device, call this from your setup() method. More...

void	save_state_ ()
	Internal method to save the state of the climate device to recover memory. More...

void	dump_traits_ (const char *tag)

Protected Member Functions inherited from esphome::EntityBase
virtual uint32_t	hash_base ()
	The hash_base() function has been deprecated. More...

void	calc_object_id_ ()

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
sensor::Sensor *	sensor_ {nullptr}
	The sensor used for getting the current temperature. More...

sensor::Sensor *	humidity_sensor_ {nullptr}
	The sensor used for getting the current humidity. More...

bool	supports_auto_ {false}
	Whether the controller supports auto/cooling/drying/fanning/heating. More...

bool	supports_heat_cool_ {false}

bool	supports_cool_ {false}

bool	supports_dry_ {false}

bool	supports_fan_only_ {false}

bool	supports_heat_ {false}

bool	supports_fan_only_action_uses_fan_mode_timer_ {false}
	Special flag – enables fan_modes to share timer with fan_only climate action. More...

bool	supports_fan_only_cooling_ {false}
	Special flag – enables fan to be switched based on target_temperature_high. More...

bool	supports_fan_with_cooling_ {false}
	Special flags – enables fan_only action to be called with cooling/heating actions. More...

bool	supports_fan_with_heating_ {false}

bool	supports_fan_mode_on_ {false}
	Whether the controller supports turning on or off just the fan. More...

bool	supports_fan_mode_off_ {false}

bool	supports_fan_mode_auto_ {false}
	Whether the controller supports fan auto mode. More...

bool	supports_fan_mode_low_ {false}
	Whether the controller supports various fan speeds and/or positions. More...

bool	supports_fan_mode_medium_ {false}

bool	supports_fan_mode_high_ {false}

bool	supports_fan_mode_middle_ {false}

bool	supports_fan_mode_focus_ {false}

bool	supports_fan_mode_diffuse_ {false}

bool	supports_fan_mode_quiet_ {false}

bool	supports_swing_mode_both_ {false}
	Whether the controller supports various swing modes. More...

bool	supports_swing_mode_off_ {false}

bool	supports_swing_mode_horizontal_ {false}

bool	supports_swing_mode_vertical_ {false}

bool	supports_two_points_ {false}
	Whether the controller supports two set points. More...

bool	cooling_max_runtime_exceeded_ {false}
	Flags indicating if maximum allowable run time was exceeded. More...

bool	heating_max_runtime_exceeded_ {false}

bool	use_startup_delay_ {false}
	Used to start "off" delay timers at boot. More...

bool	setup_complete_ {false}
	setup_complete_ blocks modifying/resetting the temps immediately after boot More...

Trigger *	cool_action_trigger_ {nullptr}
	The trigger to call when the controller should switch to cooling action/mode. More...

Trigger *	supplemental_cool_action_trigger_ {nullptr}

Trigger *	cool_mode_trigger_ {nullptr}

Trigger *	dry_action_trigger_ {nullptr}
	The trigger to call when the controller should switch to dry (dehumidification) mode. More...

Trigger *	dry_mode_trigger_ {nullptr}

Trigger *	heat_action_trigger_ {nullptr}
	The trigger to call when the controller should switch to heating action/mode. More...

Trigger *	supplemental_heat_action_trigger_ {nullptr}

Trigger *	heat_mode_trigger_ {nullptr}

Trigger *	auto_mode_trigger_ {nullptr}
	The trigger to call when the controller should switch to auto mode. More...

Trigger *	idle_action_trigger_ {nullptr}
	The trigger to call when the controller should switch to idle action/off mode. More...

Trigger *	off_mode_trigger_ {nullptr}

Trigger *	fan_only_action_trigger_ {nullptr}
	The trigger to call when the controller should switch to fan-only action/mode. More...

Trigger *	fan_only_mode_trigger_ {nullptr}

Trigger *	fan_mode_on_trigger_ {nullptr}
	The trigger to call when the controller should switch on the fan. More...

Trigger *	fan_mode_off_trigger_ {nullptr}
	The trigger to call when the controller should switch off the fan. More...

Trigger *	fan_mode_auto_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "auto" mode. More...

Trigger *	fan_mode_low_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "low" speed. More...

Trigger *	fan_mode_medium_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "medium" speed. More...

Trigger *	fan_mode_high_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "high" speed. More...

Trigger *	fan_mode_middle_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "middle" position. More...

Trigger *	fan_mode_focus_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "focus" position. More...

Trigger *	fan_mode_diffuse_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "diffuse" position. More...

Trigger *	fan_mode_quiet_trigger_ {nullptr}
	The trigger to call when the controller should switch the fan to "quiet" position. More...

Trigger *	swing_mode_both_trigger_ {nullptr}
	The trigger to call when the controller should switch the swing mode to "both". More...

Trigger *	swing_mode_off_trigger_ {nullptr}
	The trigger to call when the controller should switch the swing mode to "off". More...

Trigger *	swing_mode_horizontal_trigger_ {nullptr}
	The trigger to call when the controller should switch the swing mode to "horizontal". More...

Trigger *	swing_mode_vertical_trigger_ {nullptr}
	The trigger to call when the controller should switch the swing mode to "vertical". More...

Trigger *	temperature_change_trigger_ {nullptr}
	The trigger to call when the target temperature(s) change(es). More...

Trigger *	preset_change_trigger_ {nullptr}
	The triggr to call when the preset mode changes. More...

Trigger *	prev_action_trigger_ {nullptr}
	A reference to the trigger that was previously active. More...

Trigger *	prev_fan_mode_trigger_ {nullptr}

Trigger *	prev_mode_trigger_ {nullptr}

Trigger *	prev_swing_mode_trigger_ {nullptr}

climate::ClimateAction	supplemental_action_ {climate::CLIMATE_ACTION_OFF}
	Store previously-known states. More...

climate::ClimateFanMode	prev_fan_mode_ {climate::CLIMATE_FAN_ON}

climate::ClimateMode	prev_mode_ {climate::CLIMATE_MODE_OFF}

climate::ClimateSwingMode	prev_swing_mode_ {climate::CLIMATE_SWING_OFF}

float	prev_target_temperature_ {NAN}
	Store previously-known temperatures. More...

float	prev_target_temperature_low_ {NAN}

float	prev_target_temperature_high_ {NAN}

float	set_point_minimum_differential_ {0}
	Minimum differential required between set points. More...

float	cooling_deadband_ {0}
	Hysteresis values used for computing climate actions. More...

float	cooling_overrun_ {0}

float	heating_deadband_ {0}

float	heating_overrun_ {0}

float	supplemental_cool_delta_ {0}
	Maximum allowable temperature deltas before engauging supplemental cooling/heating actions. More...

float	supplemental_heat_delta_ {0}

const uint8_t	min_timer_duration_ {1}
	Minimum allowable duration in seconds for action timers. More...

std::vector< ThermostatClimateTimer >	timer_
	Climate action timers. More...

std::map< climate::ClimatePreset, ThermostatClimateTargetTempConfig >	preset_config_ {}
	The set of standard preset configurations this thermostat supports (Eg. AWAY, ECO, etc) More...

std::map< std::string, ThermostatClimateTargetTempConfig >	custom_preset_config_ {}
	The set of custom preset configurations this thermostat supports (eg. "My Custom Preset") More...

climate::ClimatePreset	default_preset_ {}
	Default standard preset to use on start up. More...

std::string	default_custom_preset_ {}
	Default custom preset to use on start up. More...

thermostat::OnBootRestoreFrom	on_boot_restore_from_ {thermostat::OnBootRestoreFrom::MEMORY}
	If set to DEFAULT_PRESET then the default preset is always used. More...

Protected Attributes inherited from esphome::climate::Climate
friend	ClimateCall

CallbackManager< void(Climate &)>	state_callback_ {}

CallbackManager< void(ClimateCall &)>	control_callback_ {}

ESPPreferenceObject	rtc_

optional< float >	visual_min_temperature_override_ {}

optional< float >	visual_max_temperature_override_ {}

optional< float >	visual_target_temperature_step_override_ {}

optional< float >	visual_current_temperature_step_override_ {}

optional< float >	visual_min_humidity_override_ {}

optional< float >	visual_max_humidity_override_ {}

Protected Attributes inherited from esphome::EntityBase
StringRef	name_

const char *	object_id_c_str_ {nullptr}

const char *	icon_c_str_ {nullptr}

uint32_t	object_id_hash_

bool	has_own_name_ {false}

bool	internal_ {false}

bool	disabled_by_default_ {false}

EntityCategory	entity_category_ {ENTITY_CATEGORY_NONE}

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Additional Inherited Members
Data Fields inherited from esphome::climate::Climate
ClimateMode	mode {CLIMATE_MODE_OFF}
	The active mode of the climate device. More...

ClimateAction	action {CLIMATE_ACTION_OFF}
	The active state of the climate device. More...

float	current_temperature {NAN}
	The current temperature of the climate device, as reported from the integration. More...

float	current_humidity {NAN}
	The current humidity of the climate device, as reported from the integration. More...

union {
float target_temperature
	The target temperature of the climate device. More...

struct {
float target_temperature_low {NAN}
	The minimum target temperature of the climate device, for climate devices with split target temperature. More...

float target_temperature_high {NAN}
	The maximum target temperature of the climate device, for climate devices with split target temperature. More...

}

};

float	target_humidity
	The target humidity of the climate device. More...

optional< ClimateFanMode >	fan_mode
	The active fan mode of the climate device. More...

ClimateSwingMode	swing_mode
	The active swing mode of the climate device. More...

optional< std::string >	custom_fan_mode
	The active custom fan mode of the climate device. More...

optional< ClimatePreset >	preset
	The active preset of the climate device. More...

optional< std::string >	custom_preset
	The active custom preset mode of the climate device. More...

Detailed Description

Definition at line 59 of file thermostat_climate.h.

Constructor & Destructor Documentation

◆ ThermostatClimate()

esphome::thermostat::ThermostatClimate::ThermostatClimate ( )

Definition at line 1100 of file thermostat_climate.cpp.

Member Function Documentation

◆ cancel_timer_()

bool esphome::thermostat::ThermostatClimate::cancel_timer_ ( ThermostatClimateTimerIndex timer_index )

protected

Definition at line 773 of file thermostat_climate.cpp.

◆ change_custom_preset_()

void esphome::thermostat::ThermostatClimate::change_custom_preset_ ( const std::string & custom_preset )

protected

Change to a provided custom preset setting; will reset temperature, mode, fan, and swing modes accordingly.

Definition at line 1022 of file thermostat_climate.cpp.

◆ change_preset_()

void esphome::thermostat::ThermostatClimate::change_preset_ ( climate::ClimatePreset preset )

protected

Change to a provided preset setting; will reset temperature, mode, fan, and swing modes accordingly.

Definition at line 996 of file thermostat_climate.cpp.

◆ change_preset_internal_()

bool esphome::thermostat::ThermostatClimate::change_preset_internal_ ( const ThermostatClimateTargetTempConfig & config )

protected

Applies the temperature, mode, fan, and swing modes of the provided config.

This is agnostic of custom vs built in preset Returns true if something was changed

Definition at line 1048 of file thermostat_climate.cpp.

◆ check_temperature_change_trigger_()

void esphome::thermostat::ThermostatClimate::check_temperature_change_trigger_ ( )

protected

Check if the temperature change trigger should be called.

Definition at line 852 of file thermostat_climate.cpp.

◆ climate_action_change_delayed()

bool esphome::thermostat::ThermostatClimate::climate_action_change_delayed ( )

Returns true if a climate action/fan mode transition is being delayed.

Definition at line 89 of file thermostat_climate.cpp.

◆ compute_action_()

climate::ClimateAction esphome::thermostat::ThermostatClimate::compute_action_ ( bool ignore_timers = false )

protected

Re-compute the required action of this climate controller.

Definition at line 295 of file thermostat_climate.cpp.

◆ compute_supplemental_action_()

climate::ClimateAction esphome::thermostat::ThermostatClimate::compute_supplemental_action_ ( )

protected

Definition at line 357 of file thermostat_climate.cpp.

◆ control()

void esphome::thermostat::ThermostatClimate::control ( const climate::ClimateCall & call )

overrideprotectedvirtual

Override control to change settings of the climate device.

Implements esphome::climate::Climate.

Definition at line 191 of file thermostat_climate.cpp.

◆ cool_deadband()

float esphome::thermostat::ThermostatClimate::cool_deadband ( )

Get current hysteresis values.

Definition at line 74 of file thermostat_climate.cpp.

◆ cool_overrun()

float esphome::thermostat::ThermostatClimate::cool_overrun ( )

Definition at line 75 of file thermostat_climate.cpp.

◆ cooling_action_ready_()

bool esphome::thermostat::ThermostatClimate::cooling_action_ready_ ( )

protected

Definition at line 742 of file thermostat_climate.cpp.

◆ cooling_max_run_time_timer_callback_()

void esphome::thermostat::ThermostatClimate::cooling_max_run_time_timer_callback_ ( )

protected

set_timeout() callbacks for various actions (see above)

Definition at line 791 of file thermostat_climate.cpp.

◆ cooling_off_timer_callback_()

void esphome::thermostat::ThermostatClimate::cooling_off_timer_callback_ ( )

protected

Definition at line 798 of file thermostat_climate.cpp.

◆ cooling_on_timer_callback_()

void esphome::thermostat::ThermostatClimate::cooling_on_timer_callback_ ( )

protected

Definition at line 804 of file thermostat_climate.cpp.

◆ cooling_required_()

bool esphome::thermostat::ThermostatClimate::cooling_required_ ( )

protected

Check if cooling/fanning/heating actions are required; returns true if so.

Definition at line 878 of file thermostat_climate.cpp.

◆ delayed_climate_action()

climate::ClimateAction esphome::thermostat::ThermostatClimate::delayed_climate_action ( )

Returns the climate action that is being delayed (check climate_action_change_delayed(), first!)

Definition at line 115 of file thermostat_climate.cpp.

◆ drying_action_ready_()

bool esphome::thermostat::ThermostatClimate::drying_action_ready_ ( )

protected

Definition at line 747 of file thermostat_climate.cpp.

◆ dump_config()

void esphome::thermostat::ThermostatClimate::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 1295 of file thermostat_climate.cpp.

◆ dump_preset_config_()

void esphome::thermostat::ThermostatClimate::dump_preset_config_	(	const char *	preset_name,
		const ThermostatClimateTargetTempConfig &	config,
		bool	is_default_preset
	)

protected

Definition at line 961 of file thermostat_climate.cpp.

◆ fan_mode_change_delayed()

bool esphome::thermostat::ThermostatClimate::fan_mode_change_delayed ( )

Definition at line 110 of file thermostat_climate.cpp.

◆ fan_mode_ready_()

bool esphome::thermostat::ThermostatClimate::fan_mode_ready_ ( )

protected

Definition at line 752 of file thermostat_climate.cpp.

◆ fan_mode_timer_callback_()

void esphome::thermostat::ThermostatClimate::fan_mode_timer_callback_ ( )

protected

Definition at line 810 of file thermostat_climate.cpp.

◆ fanning_action_ready_()

bool esphome::thermostat::ThermostatClimate::fanning_action_ready_ ( )

protected

Definition at line 754 of file thermostat_climate.cpp.

◆ fanning_off_timer_callback_()

void esphome::thermostat::ThermostatClimate::fanning_off_timer_callback_ ( )

protected

Definition at line 817 of file thermostat_climate.cpp.

◆ fanning_on_timer_callback_()

void esphome::thermostat::ThermostatClimate::fanning_on_timer_callback_ ( )

protected

Definition at line 822 of file thermostat_climate.cpp.

◆ fanning_required_()

bool esphome::thermostat::ThermostatClimate::fanning_required_ ( )

protected

Definition at line 898 of file thermostat_climate.cpp.

◆ get_auto_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_auto_mode_trigger ( ) const

Definition at line 1272 of file thermostat_climate.cpp.

◆ get_cool_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_cool_action_trigger ( ) const

Definition at line 1261 of file thermostat_climate.cpp.

◆ get_cool_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_cool_mode_trigger ( ) const

Definition at line 1273 of file thermostat_climate.cpp.

◆ get_dry_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_dry_action_trigger ( ) const

Definition at line 1265 of file thermostat_climate.cpp.

◆ get_dry_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_dry_mode_trigger ( ) const

Definition at line 1274 of file thermostat_climate.cpp.

◆ get_fan_mode_auto_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_auto_trigger ( ) const

Definition at line 1280 of file thermostat_climate.cpp.

◆ get_fan_mode_diffuse_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_diffuse_trigger ( ) const

Definition at line 1286 of file thermostat_climate.cpp.

◆ get_fan_mode_focus_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_focus_trigger ( ) const

Definition at line 1285 of file thermostat_climate.cpp.

◆ get_fan_mode_high_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_high_trigger ( ) const

Definition at line 1283 of file thermostat_climate.cpp.

◆ get_fan_mode_low_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_low_trigger ( ) const

Definition at line 1281 of file thermostat_climate.cpp.

◆ get_fan_mode_medium_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_medium_trigger ( ) const

Definition at line 1282 of file thermostat_climate.cpp.

◆ get_fan_mode_middle_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_middle_trigger ( ) const

Definition at line 1284 of file thermostat_climate.cpp.

◆ get_fan_mode_off_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_off_trigger ( ) const

Definition at line 1279 of file thermostat_climate.cpp.

◆ get_fan_mode_on_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_on_trigger ( ) const

Definition at line 1278 of file thermostat_climate.cpp.

◆ get_fan_mode_quiet_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_mode_quiet_trigger ( ) const

Definition at line 1287 of file thermostat_climate.cpp.

◆ get_fan_only_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_only_action_trigger ( ) const

Definition at line 1266 of file thermostat_climate.cpp.

◆ get_fan_only_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_fan_only_mode_trigger ( ) const

Definition at line 1275 of file thermostat_climate.cpp.

◆ get_heat_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_heat_action_trigger ( ) const

Definition at line 1267 of file thermostat_climate.cpp.

◆ get_heat_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_heat_mode_trigger ( ) const

Definition at line 1276 of file thermostat_climate.cpp.

◆ get_idle_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_idle_action_trigger ( ) const

Definition at line 1271 of file thermostat_climate.cpp.

◆ get_off_mode_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_off_mode_trigger ( ) const

Definition at line 1277 of file thermostat_climate.cpp.

◆ get_preset_change_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_preset_change_trigger ( ) const

Definition at line 1293 of file thermostat_climate.cpp.

◆ get_supplemental_cool_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_supplemental_cool_action_trigger ( ) const

Definition at line 1262 of file thermostat_climate.cpp.

◆ get_supplemental_heat_action_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_supplemental_heat_action_trigger ( ) const

Definition at line 1268 of file thermostat_climate.cpp.

◆ get_swing_mode_both_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_swing_mode_both_trigger ( ) const

Definition at line 1288 of file thermostat_climate.cpp.

◆ get_swing_mode_horizontal_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_swing_mode_horizontal_trigger ( ) const

Definition at line 1290 of file thermostat_climate.cpp.

◆ get_swing_mode_off_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_swing_mode_off_trigger ( ) const

Definition at line 1289 of file thermostat_climate.cpp.

◆ get_swing_mode_vertical_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_swing_mode_vertical_trigger ( ) const

Definition at line 1291 of file thermostat_climate.cpp.

◆ get_temperature_change_trigger()

Trigger * esphome::thermostat::ThermostatClimate::get_temperature_change_trigger ( ) const

Definition at line 1292 of file thermostat_climate.cpp.

◆ heat_deadband()

float esphome::thermostat::ThermostatClimate::heat_deadband ( )

Definition at line 76 of file thermostat_climate.cpp.

◆ heat_overrun()

float esphome::thermostat::ThermostatClimate::heat_overrun ( )

Definition at line 77 of file thermostat_climate.cpp.

◆ heating_action_ready_()

bool esphome::thermostat::ThermostatClimate::heating_action_ready_ ( )

protected

Definition at line 761 of file thermostat_climate.cpp.

◆ heating_max_run_time_timer_callback_()

void esphome::thermostat::ThermostatClimate::heating_max_run_time_timer_callback_ ( )

protected

Definition at line 827 of file thermostat_climate.cpp.

◆ heating_off_timer_callback_()

void esphome::thermostat::ThermostatClimate::heating_off_timer_callback_ ( )

protected

Definition at line 834 of file thermostat_climate.cpp.

◆ heating_on_timer_callback_()

void esphome::thermostat::ThermostatClimate::heating_on_timer_callback_ ( )

protected

Definition at line 840 of file thermostat_climate.cpp.

◆ heating_required_()

bool esphome::thermostat::ThermostatClimate::heating_required_ ( )

protected

Definition at line 921 of file thermostat_climate.cpp.

◆ hysteresis_valid()

bool esphome::thermostat::ThermostatClimate::hysteresis_valid ( )

Set point and hysteresis validation.

Definition at line 119 of file thermostat_climate.cpp.

◆ idle_action_ready_()

bool esphome::thermostat::ThermostatClimate::idle_action_ready_ ( )

protected

Is the action ready to be called? Returns true if so.

Definition at line 733 of file thermostat_climate.cpp.

◆ idle_on_timer_callback_()

void esphome::thermostat::ThermostatClimate::idle_on_timer_callback_ ( )

protected

Definition at line 846 of file thermostat_climate.cpp.

◆ locked_fan_mode()

climate::ClimateFanMode esphome::thermostat::ThermostatClimate::locked_fan_mode ( )

Returns the fan mode that is locked in (check fan_mode_change_delayed(), first!)

Definition at line 117 of file thermostat_climate.cpp.

◆ loop()

void esphome::thermostat::ThermostatClimate::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 65 of file thermostat_climate.cpp.

◆ refresh()

void esphome::thermostat::ThermostatClimate::refresh ( )

Call triggers based on updated climate states (modes/actions)

Definition at line 79 of file thermostat_climate.cpp.

◆ set_cool_deadband()

void esphome::thermostat::ThermostatClimate::set_cool_deadband ( float deadband )

Definition at line 1143 of file thermostat_climate.cpp.

◆ set_cool_overrun()

void esphome::thermostat::ThermostatClimate::set_cool_overrun ( float overrun )

Definition at line 1144 of file thermostat_climate.cpp.

◆ set_cooling_maximum_run_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_cooling_maximum_run_time_in_sec ( uint32_t time )

Definition at line 1149 of file thermostat_climate.cpp.

◆ set_cooling_minimum_off_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_cooling_minimum_off_time_in_sec ( uint32_t time )

Definition at line 1153 of file thermostat_climate.cpp.

◆ set_cooling_minimum_run_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_cooling_minimum_run_time_in_sec ( uint32_t time )

Definition at line 1157 of file thermostat_climate.cpp.

◆ set_custom_preset_config()

void esphome::thermostat::ThermostatClimate::set_custom_preset_config	(	const std::string &	name,
		const ThermostatClimateTargetTempConfig &	config
	)

Definition at line 1095 of file thermostat_climate.cpp.

◆ set_default_preset() [1/2]

void esphome::thermostat::ThermostatClimate::set_default_preset ( const std::string & custom_preset )

Definition at line 1131 of file thermostat_climate.cpp.

◆ set_default_preset() [2/2]

void esphome::thermostat::ThermostatClimate::set_default_preset ( climate::ClimatePreset preset )

Definition at line 1135 of file thermostat_climate.cpp.

◆ set_fan_mode_minimum_switching_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_fan_mode_minimum_switching_time_in_sec ( uint32_t time )

Definition at line 1161 of file thermostat_climate.cpp.

◆ set_fanning_minimum_off_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_fanning_minimum_off_time_in_sec ( uint32_t time )

Definition at line 1165 of file thermostat_climate.cpp.

◆ set_fanning_minimum_run_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_fanning_minimum_run_time_in_sec ( uint32_t time )

Definition at line 1169 of file thermostat_climate.cpp.

◆ set_heat_deadband()

void esphome::thermostat::ThermostatClimate::set_heat_deadband ( float deadband )

Definition at line 1145 of file thermostat_climate.cpp.

◆ set_heat_overrun()

void esphome::thermostat::ThermostatClimate::set_heat_overrun ( float overrun )

Definition at line 1146 of file thermostat_climate.cpp.

◆ set_heating_maximum_run_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_heating_maximum_run_time_in_sec ( uint32_t time )

Definition at line 1173 of file thermostat_climate.cpp.

◆ set_heating_minimum_off_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_heating_minimum_off_time_in_sec ( uint32_t time )

Definition at line 1177 of file thermostat_climate.cpp.

◆ set_heating_minimum_run_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_heating_minimum_run_time_in_sec ( uint32_t time )

Definition at line 1181 of file thermostat_climate.cpp.

◆ set_humidity_sensor()

void esphome::thermostat::ThermostatClimate::set_humidity_sensor ( sensor::Sensor * humidity_sensor )

Definition at line 1190 of file thermostat_climate.cpp.

◆ set_idle_minimum_time_in_sec()

void esphome::thermostat::ThermostatClimate::set_idle_minimum_time_in_sec ( uint32_t time )

Definition at line 1185 of file thermostat_climate.cpp.

◆ set_on_boot_restore_from()

void esphome::thermostat::ThermostatClimate::set_on_boot_restore_from ( thermostat::OnBootRestoreFrom on_boot_restore_from )

Definition at line 1137 of file thermostat_climate.cpp.

◆ set_preset_config()

void esphome::thermostat::ThermostatClimate::set_preset_config	(	climate::ClimatePreset	preset,
		const ThermostatClimateTargetTempConfig &	config
	)

Definition at line 1090 of file thermostat_climate.cpp.

◆ set_sensor()

void esphome::thermostat::ThermostatClimate::set_sensor ( sensor::Sensor * sensor )

Definition at line 1189 of file thermostat_climate.cpp.

◆ set_set_point_minimum_differential()

void esphome::thermostat::ThermostatClimate::set_set_point_minimum_differential ( float differential )

Definition at line 1140 of file thermostat_climate.cpp.

◆ set_supplemental_cool_delta()

void esphome::thermostat::ThermostatClimate::set_supplemental_cool_delta ( float delta )

Definition at line 1147 of file thermostat_climate.cpp.

◆ set_supplemental_heat_delta()

void esphome::thermostat::ThermostatClimate::set_supplemental_heat_delta ( float delta )

Definition at line 1148 of file thermostat_climate.cpp.

◆ set_supports_auto()

void esphome::thermostat::ThermostatClimate::set_supports_auto ( bool supports_auto )

Definition at line 1197 of file thermostat_climate.cpp.

◆ set_supports_cool()

void esphome::thermostat::ThermostatClimate::set_supports_cool ( bool supports_cool )

Definition at line 1198 of file thermostat_climate.cpp.

◆ set_supports_dry()

void esphome::thermostat::ThermostatClimate::set_supports_dry ( bool supports_dry )

Definition at line 1199 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_auto()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_auto ( bool supports_fan_mode_auto )

Definition at line 1221 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_diffuse()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_diffuse ( bool supports_fan_mode_diffuse )

Definition at line 1239 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_focus()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_focus ( bool supports_fan_mode_focus )

Definition at line 1236 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_high()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_high ( bool supports_fan_mode_high )

Definition at line 1230 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_low()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_low ( bool supports_fan_mode_low )

Definition at line 1224 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_medium()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_medium ( bool supports_fan_mode_medium )

Definition at line 1227 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_middle()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_middle ( bool supports_fan_mode_middle )

Definition at line 1233 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_off()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_off ( bool supports_fan_mode_off )

Definition at line 1218 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_on()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_on ( bool supports_fan_mode_on )

Definition at line 1215 of file thermostat_climate.cpp.

◆ set_supports_fan_mode_quiet()

void esphome::thermostat::ThermostatClimate::set_supports_fan_mode_quiet ( bool supports_fan_mode_quiet )

Definition at line 1242 of file thermostat_climate.cpp.

◆ set_supports_fan_only()

void esphome::thermostat::ThermostatClimate::set_supports_fan_only ( bool supports_fan_only )

Definition at line 1200 of file thermostat_climate.cpp.

◆ set_supports_fan_only_action_uses_fan_mode_timer()

void esphome::thermostat::ThermostatClimate::set_supports_fan_only_action_uses_fan_mode_timer ( bool fan_only_action_uses_fan_mode_timer )

Definition at line 1201 of file thermostat_climate.cpp.

◆ set_supports_fan_only_cooling()

void esphome::thermostat::ThermostatClimate::set_supports_fan_only_cooling ( bool supports_fan_only_cooling )

Definition at line 1205 of file thermostat_climate.cpp.

◆ set_supports_fan_with_cooling()

void esphome::thermostat::ThermostatClimate::set_supports_fan_with_cooling ( bool supports_fan_with_cooling )

Definition at line 1208 of file thermostat_climate.cpp.

◆ set_supports_fan_with_heating()

void esphome::thermostat::ThermostatClimate::set_supports_fan_with_heating ( bool supports_fan_with_heating )

Definition at line 1211 of file thermostat_climate.cpp.

◆ set_supports_heat()

void esphome::thermostat::ThermostatClimate::set_supports_heat ( bool supports_heat )

Definition at line 1214 of file thermostat_climate.cpp.

◆ set_supports_heat_cool()

void esphome::thermostat::ThermostatClimate::set_supports_heat_cool ( bool supports_heat_cool )

Definition at line 1194 of file thermostat_climate.cpp.

◆ set_supports_swing_mode_both()

void esphome::thermostat::ThermostatClimate::set_supports_swing_mode_both ( bool supports_swing_mode_both )

Definition at line 1245 of file thermostat_climate.cpp.

◆ set_supports_swing_mode_horizontal()

void esphome::thermostat::ThermostatClimate::set_supports_swing_mode_horizontal ( bool supports_swing_mode_horizontal )

Definition at line 1251 of file thermostat_climate.cpp.

◆ set_supports_swing_mode_off()

void esphome::thermostat::ThermostatClimate::set_supports_swing_mode_off ( bool supports_swing_mode_off )

Definition at line 1248 of file thermostat_climate.cpp.

◆ set_supports_swing_mode_vertical()

void esphome::thermostat::ThermostatClimate::set_supports_swing_mode_vertical ( bool supports_swing_mode_vertical )

Definition at line 1254 of file thermostat_climate.cpp.

◆ set_supports_two_points()

void esphome::thermostat::ThermostatClimate::set_supports_two_points ( bool supports_two_points )

Definition at line 1257 of file thermostat_climate.cpp.

◆ set_use_startup_delay()

void esphome::thermostat::ThermostatClimate::set_use_startup_delay ( bool use_startup_delay )

Definition at line 1193 of file thermostat_climate.cpp.

◆ setup()

void esphome::thermostat::ThermostatClimate::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 9 of file thermostat_climate.cpp.

◆ start_timer_()

void esphome::thermostat::ThermostatClimate::start_timer_ ( ThermostatClimateTimerIndex timer_index )

protected

Start/cancel/get status of climate action timer.

Definition at line 766 of file thermostat_climate.cpp.

◆ supplemental_cooling_required_()

bool esphome::thermostat::ThermostatClimate::supplemental_cooling_required_ ( )

protected

Definition at line 941 of file thermostat_climate.cpp.

◆ supplemental_heating_required_()

bool esphome::thermostat::ThermostatClimate::supplemental_heating_required_ ( )

protected

Definition at line 951 of file thermostat_climate.cpp.

◆ switch_to_action_()

void esphome::thermostat::ThermostatClimate::switch_to_action_	(	climate::ClimateAction	action,
		bool	publish_state = `true`
	)

protected

Switch the climate device to the given climate action.

Definition at line 399 of file thermostat_climate.cpp.

◆ switch_to_fan_mode_()

void esphome::thermostat::ThermostatClimate::switch_to_fan_mode_	(	climate::ClimateFanMode	fan_mode,
		bool	publish_state = `true`
	)

protected

Switch the climate device to the given climate fan mode.

Definition at line 572 of file thermostat_climate.cpp.

◆ switch_to_mode_()

void esphome::thermostat::ThermostatClimate::switch_to_mode_	(	climate::ClimateMode	mode,
		bool	publish_state = `true`
	)

protected

Switch the climate device to the given climate mode.

Definition at line 645 of file thermostat_climate.cpp.

◆ switch_to_supplemental_action_()

void esphome::thermostat::ThermostatClimate::switch_to_supplemental_action_ ( climate::ClimateAction action )

protected

Definition at line 518 of file thermostat_climate.cpp.

◆ switch_to_swing_mode_()

void esphome::thermostat::ThermostatClimate::switch_to_swing_mode_	(	climate::ClimateSwingMode	swing_mode,
		bool	publish_state = `true`
	)

protected

Switch the climate device to the given climate swing mode.

Definition at line 692 of file thermostat_climate.cpp.

◆ timer_active_()

bool esphome::thermostat::ThermostatClimate::timer_active_ ( ThermostatClimateTimerIndex timer_index )

protected

Definition at line 779 of file thermostat_climate.cpp.

◆ timer_cbf_()

std::function< void()> esphome::thermostat::ThermostatClimate::timer_cbf_ ( ThermostatClimateTimerIndex timer_index )

protected

Definition at line 787 of file thermostat_climate.cpp.

◆ timer_duration_()

uint32_t esphome::thermostat::ThermostatClimate::timer_duration_ ( ThermostatClimateTimerIndex timer_index )

protected

Definition at line 783 of file thermostat_climate.cpp.

◆ traits()

climate::ClimateTraits esphome::thermostat::ThermostatClimate::traits ( )

overrideprotectedvirtual

Return the traits of this controller.

Implements esphome::climate::Climate.

Definition at line 234 of file thermostat_climate.cpp.

◆ trigger_supplemental_action_()

void esphome::thermostat::ThermostatClimate::trigger_supplemental_action_ ( )

protected

Definition at line 545 of file thermostat_climate.cpp.

◆ validate_target_temperature()

void esphome::thermostat::ThermostatClimate::validate_target_temperature ( )

Definition at line 130 of file thermostat_climate.cpp.

◆ validate_target_temperature_high()

void esphome::thermostat::ThermostatClimate::validate_target_temperature_high ( )

Definition at line 172 of file thermostat_climate.cpp.

◆ validate_target_temperature_low()

void esphome::thermostat::ThermostatClimate::validate_target_temperature_low ( )

Definition at line 153 of file thermostat_climate.cpp.

◆ validate_target_temperatures()

void esphome::thermostat::ThermostatClimate::validate_target_temperatures ( )

Definition at line 144 of file thermostat_climate.cpp.

Field Documentation

◆ auto_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::auto_mode_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to auto mode.

In auto mode, the controller will enable heating/cooling as necessary and switch to idle when the temperature is within the thresholds/set points.

Definition at line 342 of file thermostat_climate.h.

◆ cool_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::cool_action_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to cooling action/mode.

A null value for this attribute means that the controller has no cooling action For example electric heat, where only heating (power on) and not-heating (power off) is possible.

Definition at line 318 of file thermostat_climate.h.

◆ cool_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::cool_mode_trigger_ {nullptr}

protected

Definition at line 320 of file thermostat_climate.h.

◆ cooling_deadband_

float esphome::thermostat::ThermostatClimate::cooling_deadband_ {0}

protected

Hysteresis values used for computing climate actions.

Definition at line 433 of file thermostat_climate.h.

◆ cooling_max_runtime_exceeded_

bool esphome::thermostat::ThermostatClimate::cooling_max_runtime_exceeded_ {false}

protected

Flags indicating if maximum allowable run time was exceeded.

Definition at line 304 of file thermostat_climate.h.

◆ cooling_overrun_

float esphome::thermostat::ThermostatClimate::cooling_overrun_ {0}

protected

Definition at line 434 of file thermostat_climate.h.

◆ custom_preset_config_

std::map<std::string, ThermostatClimateTargetTempConfig> esphome::thermostat::ThermostatClimate::custom_preset_config_ {}

protected

The set of custom preset configurations this thermostat supports (eg. "My Custom Preset")

Definition at line 462 of file thermostat_climate.h.

◆ default_custom_preset_

std::string esphome::thermostat::ThermostatClimate::default_custom_preset_ {}

protected

Default custom preset to use on start up.

Definition at line 467 of file thermostat_climate.h.

◆ default_preset_

climate::ClimatePreset esphome::thermostat::ThermostatClimate::default_preset_ {}

protected

Default standard preset to use on start up.

Definition at line 465 of file thermostat_climate.h.

◆ dry_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::dry_action_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to dry (dehumidification) mode.

In dry mode, the controller is assumed to have both heating and cooling disabled, although the system may use its cooling mechanism to achieve drying.

Definition at line 326 of file thermostat_climate.h.

◆ dry_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::dry_mode_trigger_ {nullptr}

protected

Definition at line 327 of file thermostat_climate.h.

◆ fan_mode_auto_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_auto_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "auto" mode.

Definition at line 364 of file thermostat_climate.h.

◆ fan_mode_diffuse_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_diffuse_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "diffuse" position.

Definition at line 382 of file thermostat_climate.h.

◆ fan_mode_focus_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_focus_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "focus" position.

Definition at line 379 of file thermostat_climate.h.

◆ fan_mode_high_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_high_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "high" speed.

Definition at line 373 of file thermostat_climate.h.

◆ fan_mode_low_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_low_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "low" speed.

Definition at line 367 of file thermostat_climate.h.

◆ fan_mode_medium_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_medium_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "medium" speed.

Definition at line 370 of file thermostat_climate.h.

◆ fan_mode_middle_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_middle_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "middle" position.

Definition at line 376 of file thermostat_climate.h.

◆ fan_mode_off_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_off_trigger_ {nullptr}

protected

The trigger to call when the controller should switch off the fan.

Definition at line 361 of file thermostat_climate.h.

◆ fan_mode_on_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_on_trigger_ {nullptr}

protected

The trigger to call when the controller should switch on the fan.

Definition at line 358 of file thermostat_climate.h.

◆ fan_mode_quiet_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_mode_quiet_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the fan to "quiet" position.

Definition at line 385 of file thermostat_climate.h.

◆ fan_only_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_only_action_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to fan-only action/mode.

In fan-only mode, the controller is assumed to have both heating and cooling disabled. The system should activate the fan only.

Definition at line 354 of file thermostat_climate.h.

◆ fan_only_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::fan_only_mode_trigger_ {nullptr}

protected

Definition at line 355 of file thermostat_climate.h.

◆ heat_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::heat_action_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to heating action/mode.

A null value for this attribute means that the controller has no heating action For example window blinds, where only cooling (blinds closed) and not-cooling (blinds open) is possible.

Definition at line 334 of file thermostat_climate.h.

◆ heat_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::heat_mode_trigger_ {nullptr}

protected

Definition at line 336 of file thermostat_climate.h.

◆ heating_deadband_

float esphome::thermostat::ThermostatClimate::heating_deadband_ {0}

protected

Definition at line 435 of file thermostat_climate.h.

◆ heating_max_runtime_exceeded_

bool esphome::thermostat::ThermostatClimate::heating_max_runtime_exceeded_ {false}

protected

Definition at line 305 of file thermostat_climate.h.

◆ heating_overrun_

float esphome::thermostat::ThermostatClimate::heating_overrun_ {0}

protected

Definition at line 436 of file thermostat_climate.h.

◆ humidity_sensor_

sensor::Sensor* esphome::thermostat::ThermostatClimate::humidity_sensor_ {nullptr}

protected

The sensor used for getting the current humidity.

Definition at line 246 of file thermostat_climate.h.

◆ idle_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::idle_action_trigger_ {nullptr}

protected

The trigger to call when the controller should switch to idle action/off mode.

In these actions/modes, the controller is assumed to have both heating and cooling disabled.

Definition at line 347 of file thermostat_climate.h.

◆ min_timer_duration_

const uint8_t esphome::thermostat::ThermostatClimate::min_timer_duration_ {1}

protected

Minimum allowable duration in seconds for action timers.

Definition at line 443 of file thermostat_climate.h.

◆ off_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::off_mode_trigger_ {nullptr}

protected

Definition at line 348 of file thermostat_climate.h.

◆ on_boot_restore_from_

thermostat::OnBootRestoreFrom esphome::thermostat::ThermostatClimate::on_boot_restore_from_ {thermostat::OnBootRestoreFrom::MEMORY}

protected

If set to DEFAULT_PRESET then the default preset is always used.

When MEMORY prior state will attempt to be restored if possible

Definition at line 471 of file thermostat_climate.h.

◆ preset_change_trigger_

Trigger* esphome::thermostat::ThermostatClimate::preset_change_trigger_ {nullptr}

protected

The triggr to call when the preset mode changes.

Definition at line 403 of file thermostat_climate.h.

◆ preset_config_

std::map<climate::ClimatePreset, ThermostatClimateTargetTempConfig> esphome::thermostat::ThermostatClimate::preset_config_ {}

protected

The set of standard preset configurations this thermostat supports (Eg. AWAY, ECO, etc)

Definition at line 460 of file thermostat_climate.h.

◆ prev_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::prev_action_trigger_ {nullptr}

protected

A reference to the trigger that was previously active.

This is so that the previous trigger can be stopped before enabling a new one for each climate category (mode, action, fan_mode, swing_mode).

Definition at line 409 of file thermostat_climate.h.

◆ prev_fan_mode_

climate::ClimateFanMode esphome::thermostat::ThermostatClimate::prev_fan_mode_ {climate::CLIMATE_FAN_ON}

protected

Definition at line 418 of file thermostat_climate.h.

◆ prev_fan_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::prev_fan_mode_trigger_ {nullptr}

protected

Definition at line 410 of file thermostat_climate.h.

◆ prev_mode_

climate::ClimateMode esphome::thermostat::ThermostatClimate::prev_mode_ {climate::CLIMATE_MODE_OFF}

protected

Definition at line 419 of file thermostat_climate.h.

◆ prev_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::prev_mode_trigger_ {nullptr}

protected

Definition at line 411 of file thermostat_climate.h.

◆ prev_swing_mode_

climate::ClimateSwingMode esphome::thermostat::ThermostatClimate::prev_swing_mode_ {climate::CLIMATE_SWING_OFF}

protected

Definition at line 420 of file thermostat_climate.h.

◆ prev_swing_mode_trigger_

Trigger* esphome::thermostat::ThermostatClimate::prev_swing_mode_trigger_ {nullptr}

protected

Definition at line 412 of file thermostat_climate.h.

◆ prev_target_temperature_

float esphome::thermostat::ThermostatClimate::prev_target_temperature_ {NAN}

protected

Store previously-known temperatures.

These are used to determine when the temperature change trigger/action needs to be called

Definition at line 425 of file thermostat_climate.h.

◆ prev_target_temperature_high_

float esphome::thermostat::ThermostatClimate::prev_target_temperature_high_ {NAN}

protected

Definition at line 427 of file thermostat_climate.h.

◆ prev_target_temperature_low_

float esphome::thermostat::ThermostatClimate::prev_target_temperature_low_ {NAN}

protected

Definition at line 426 of file thermostat_climate.h.

◆ sensor_

sensor::Sensor* esphome::thermostat::ThermostatClimate::sensor_ {nullptr}

protected

The sensor used for getting the current temperature.

Definition at line 244 of file thermostat_climate.h.

◆ set_point_minimum_differential_

float esphome::thermostat::ThermostatClimate::set_point_minimum_differential_ {0}

protected

Minimum differential required between set points.

Definition at line 430 of file thermostat_climate.h.

◆ setup_complete_

bool esphome::thermostat::ThermostatClimate::setup_complete_ {false}

protected

setup_complete_ blocks modifying/resetting the temps immediately after boot

Definition at line 311 of file thermostat_climate.h.

◆ supplemental_action_

climate::ClimateAction esphome::thermostat::ThermostatClimate::supplemental_action_ {climate::CLIMATE_ACTION_OFF}

protected

Store previously-known states.

These are used to determine when a trigger/action needs to be called

Definition at line 417 of file thermostat_climate.h.

◆ supplemental_cool_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::supplemental_cool_action_trigger_ {nullptr}

protected

Definition at line 319 of file thermostat_climate.h.

◆ supplemental_cool_delta_

float esphome::thermostat::ThermostatClimate::supplemental_cool_delta_ {0}

protected

Maximum allowable temperature deltas before engauging supplemental cooling/heating actions.

Definition at line 439 of file thermostat_climate.h.

◆ supplemental_heat_action_trigger_

Trigger* esphome::thermostat::ThermostatClimate::supplemental_heat_action_trigger_ {nullptr}

protected

Definition at line 335 of file thermostat_climate.h.

◆ supplemental_heat_delta_

float esphome::thermostat::ThermostatClimate::supplemental_heat_delta_ {0}

protected

Definition at line 440 of file thermostat_climate.h.

◆ supports_auto_

bool esphome::thermostat::ThermostatClimate::supports_auto_ {false}

protected

Whether the controller supports auto/cooling/drying/fanning/heating.

A false value for any given attribute means that the controller has no such action (for example a thermostat, where only heating and not-heating is possible).

Definition at line 252 of file thermostat_climate.h.

◆ supports_cool_

bool esphome::thermostat::ThermostatClimate::supports_cool_ {false}

protected

Definition at line 254 of file thermostat_climate.h.

◆ supports_dry_

bool esphome::thermostat::ThermostatClimate::supports_dry_ {false}

protected

Definition at line 255 of file thermostat_climate.h.

◆ supports_fan_mode_auto_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_auto_ {false}

protected

Whether the controller supports fan auto mode.

A false value for this attribute means that the controller has no fan-auto action (for example a thermostat, where independent control of the fan is not possible).

Definition at line 277 of file thermostat_climate.h.

◆ supports_fan_mode_diffuse_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_diffuse_ {false}

protected

Definition at line 287 of file thermostat_climate.h.

◆ supports_fan_mode_focus_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_focus_ {false}

protected

Definition at line 286 of file thermostat_climate.h.

◆ supports_fan_mode_high_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_high_ {false}

protected

Definition at line 284 of file thermostat_climate.h.

◆ supports_fan_mode_low_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_low_ {false}

protected

Whether the controller supports various fan speeds and/or positions.

A false value for any given attribute means that the controller has no such fan action.

Definition at line 282 of file thermostat_climate.h.

◆ supports_fan_mode_medium_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_medium_ {false}

protected

Definition at line 283 of file thermostat_climate.h.

◆ supports_fan_mode_middle_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_middle_ {false}

protected

Definition at line 285 of file thermostat_climate.h.

◆ supports_fan_mode_off_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_off_ {false}

protected

Definition at line 271 of file thermostat_climate.h.

◆ supports_fan_mode_on_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_on_ {false}

protected

Whether the controller supports turning on or off just the fan.

A false value for either attribute means that the controller has no fan on/off action (for example a thermostat, where independent control of the fan is not possible).

Definition at line 270 of file thermostat_climate.h.

◆ supports_fan_mode_quiet_

bool esphome::thermostat::ThermostatClimate::supports_fan_mode_quiet_ {false}

protected

Definition at line 288 of file thermostat_climate.h.

◆ supports_fan_only_

bool esphome::thermostat::ThermostatClimate::supports_fan_only_ {false}

protected

Definition at line 256 of file thermostat_climate.h.

◆ supports_fan_only_action_uses_fan_mode_timer_

bool esphome::thermostat::ThermostatClimate::supports_fan_only_action_uses_fan_mode_timer_ {false}

protected

Special flag – enables fan_modes to share timer with fan_only climate action.

Definition at line 259 of file thermostat_climate.h.

◆ supports_fan_only_cooling_

bool esphome::thermostat::ThermostatClimate::supports_fan_only_cooling_ {false}

protected

Special flag – enables fan to be switched based on target_temperature_high.

Definition at line 261 of file thermostat_climate.h.

◆ supports_fan_with_cooling_

bool esphome::thermostat::ThermostatClimate::supports_fan_with_cooling_ {false}

protected

Special flags – enables fan_only action to be called with cooling/heating actions.

Definition at line 263 of file thermostat_climate.h.

◆ supports_fan_with_heating_

bool esphome::thermostat::ThermostatClimate::supports_fan_with_heating_ {false}

protected

Definition at line 264 of file thermostat_climate.h.

◆ supports_heat_

bool esphome::thermostat::ThermostatClimate::supports_heat_ {false}

protected

Definition at line 257 of file thermostat_climate.h.

◆ supports_heat_cool_

bool esphome::thermostat::ThermostatClimate::supports_heat_cool_ {false}

protected

Definition at line 253 of file thermostat_climate.h.

◆ supports_swing_mode_both_

bool esphome::thermostat::ThermostatClimate::supports_swing_mode_both_ {false}

protected

Whether the controller supports various swing modes.

A false value for any given attribute means that the controller has no such swing mode.

Definition at line 293 of file thermostat_climate.h.

◆ supports_swing_mode_horizontal_

bool esphome::thermostat::ThermostatClimate::supports_swing_mode_horizontal_ {false}

protected

Definition at line 295 of file thermostat_climate.h.

◆ supports_swing_mode_off_

bool esphome::thermostat::ThermostatClimate::supports_swing_mode_off_ {false}

protected

Definition at line 294 of file thermostat_climate.h.

◆ supports_swing_mode_vertical_

bool esphome::thermostat::ThermostatClimate::supports_swing_mode_vertical_ {false}

protected

Definition at line 296 of file thermostat_climate.h.

◆ supports_two_points_

bool esphome::thermostat::ThermostatClimate::supports_two_points_ {false}

protected

Whether the controller supports two set points.

A false value means that the controller has no such support.

Definition at line 301 of file thermostat_climate.h.

◆ swing_mode_both_trigger_

Trigger* esphome::thermostat::ThermostatClimate::swing_mode_both_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the swing mode to "both".

Definition at line 388 of file thermostat_climate.h.

◆ swing_mode_horizontal_trigger_

Trigger* esphome::thermostat::ThermostatClimate::swing_mode_horizontal_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the swing mode to "horizontal".

Definition at line 394 of file thermostat_climate.h.

◆ swing_mode_off_trigger_

Trigger* esphome::thermostat::ThermostatClimate::swing_mode_off_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the swing mode to "off".

Definition at line 391 of file thermostat_climate.h.

◆ swing_mode_vertical_trigger_

Trigger* esphome::thermostat::ThermostatClimate::swing_mode_vertical_trigger_ {nullptr}

protected

The trigger to call when the controller should switch the swing mode to "vertical".

Definition at line 397 of file thermostat_climate.h.

◆ temperature_change_trigger_

Trigger* esphome::thermostat::ThermostatClimate::temperature_change_trigger_ {nullptr}

protected

The trigger to call when the target temperature(s) change(es).

Definition at line 400 of file thermostat_climate.h.

◆ timer_

std::vector<ThermostatClimateTimer> esphome::thermostat::ThermostatClimate::timer_

protected

Initial value:

{
      {false, 0, 0, std::bind(&ThermostatClimate::cooling_max_run_time_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::cooling_off_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::cooling_on_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::fan_mode_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::fanning_off_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::fanning_on_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::heating_max_run_time_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::heating_off_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::heating_on_timer_callback_, this)},
      {false, 0, 0, std::bind(&ThermostatClimate::idle_on_timer_callback_, this)},
  }

Climate action timers.

Definition at line 446 of file thermostat_climate.h.

◆ use_startup_delay_

bool esphome::thermostat::ThermostatClimate::use_startup_delay_ {false}

protected

Used to start "off" delay timers at boot.

Definition at line 308 of file thermostat_climate.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/thermostat/thermostat_climate.h
/opt/build/esphome/esphome/components/thermostat/thermostat_climate.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ThermostatClimate()

Member Function Documentation

◆ cancel_timer_()

◆ change_custom_preset_()

◆ change_preset_()

◆ change_preset_internal_()

◆ check_temperature_change_trigger_()

◆ climate_action_change_delayed()

◆ compute_action_()

◆ compute_supplemental_action_()

◆ control()

◆ cool_deadband()

◆ cool_overrun()

◆ cooling_action_ready_()

◆ cooling_max_run_time_timer_callback_()

◆ cooling_off_timer_callback_()

◆ cooling_on_timer_callback_()

◆ cooling_required_()

◆ delayed_climate_action()

◆ drying_action_ready_()

◆ dump_config()

◆ dump_preset_config_()

◆ fan_mode_change_delayed()

◆ fan_mode_ready_()

◆ fan_mode_timer_callback_()

◆ fanning_action_ready_()

◆ fanning_off_timer_callback_()

◆ fanning_on_timer_callback_()

◆ fanning_required_()

◆ get_auto_mode_trigger()

◆ get_cool_action_trigger()

◆ get_cool_mode_trigger()

◆ get_dry_action_trigger()

◆ get_dry_mode_trigger()

◆ get_fan_mode_auto_trigger()

◆ get_fan_mode_diffuse_trigger()

◆ get_fan_mode_focus_trigger()

◆ get_fan_mode_high_trigger()

◆ get_fan_mode_low_trigger()

◆ get_fan_mode_medium_trigger()

◆ get_fan_mode_middle_trigger()

◆ get_fan_mode_off_trigger()

◆ get_fan_mode_on_trigger()

◆ get_fan_mode_quiet_trigger()

◆ get_fan_only_action_trigger()

◆ get_fan_only_mode_trigger()

◆ get_heat_action_trigger()

◆ get_heat_mode_trigger()

◆ get_idle_action_trigger()

◆ get_off_mode_trigger()

◆ get_preset_change_trigger()

◆ get_supplemental_cool_action_trigger()

◆ get_supplemental_heat_action_trigger()

◆ get_swing_mode_both_trigger()

◆ get_swing_mode_horizontal_trigger()

◆ get_swing_mode_off_trigger()

◆ get_swing_mode_vertical_trigger()

◆ get_temperature_change_trigger()

◆ heat_deadband()

◆ heat_overrun()

◆ heating_action_ready_()

◆ heating_max_run_time_timer_callback_()

◆ heating_off_timer_callback_()

◆ heating_on_timer_callback_()

◆ heating_required_()

◆ hysteresis_valid()

◆ idle_action_ready_()

◆ idle_on_timer_callback_()

◆ locked_fan_mode()

◆ loop()

◆ refresh()

◆ set_cool_deadband()

◆ set_cool_overrun()

◆ set_cooling_maximum_run_time_in_sec()