ESPHome  2024.9.2
Public Member Functions | Protected Member Functions | Protected Attributes
esphome::qspi_amoled::QspiAmoLed Class Reference

#include <qspi_amoled.h>

Inheritance diagram for esphome::qspi_amoled::QspiAmoLed:
esphome::display::DisplayBuffer esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_1MHZ > esphome::display::Display esphome::spi::SPIClient esphome::PollingComponent esphome::Component

Public Member Functions

void set_model (Model model)
 
void update () override
 
void setup () override
 
display::ColorOrder get_color_mode ()
 
void set_color_mode (display::ColorOrder color_mode)
 
void set_reset_pin (GPIOPin *reset_pin)
 
void set_enable_pin (GPIOPin *enable_pin)
 
void set_dimensions (uint16_t width, uint16_t height)
 
void set_invert_colors (bool invert_colors)
 
void set_mirror_x (bool mirror_x)
 
void set_mirror_y (bool mirror_y)
 
void set_swap_xy (bool swap_xy)
 
void set_brightness (uint8_t brightness)
 
void set_offsets (int16_t offset_x, int16_t offset_y)
 
display::DisplayType get_display_type () override
 
void dump_config () override
 
int get_width_internal () override
 
int get_height_internal () override
 
bool can_proceed () override
 
- Public Member Functions inherited from esphome::display::DisplayBuffer
int get_width () override
 Get the width of the image in pixels with rotation applied. More...
 
int get_height () override
 Get the height of the image in pixels with rotation applied. More...
 
void draw_pixel_at (int x, int y, Color color) override
 Set a single pixel at the specified coordinates to the given color. More...
 
- Public Member Functions inherited from esphome::display::Display
virtual void fill (Color color)
 Fill the entire screen with the given color. More...
 
void clear ()
 Clear the entire screen by filling it with OFF pixels. More...
 
int get_native_width ()
 Get the native (original) width of the display in pixels. More...
 
int get_native_height ()
 Get the native (original) height of the display in pixels. More...
 
void draw_pixel_at (int x, int y)
 Set a single pixel at the specified coordinates to default color. More...
 
void draw_pixels_at (int x_start, int y_start, int w, int h, const uint8_t *ptr, ColorOrder order, ColorBitness bitness, bool big_endian)
 Convenience overload for base case where the pixels are packed into the buffer with no gaps (e.g. suits LVGL.) More...
 
void line (int x1, int y1, int x2, int y2, Color color=COLOR_ON)
 Draw a straight line from the point [x1,y1] to [x2,y2] with the given color. More...
 
void line_at_angle (int x, int y, int angle, int length, Color color=COLOR_ON)
 Draw a straight line at the given angle based on the origin [x, y] for a specified length with the given color. More...
 
void line_at_angle (int x, int y, int angle, int start_radius, int stop_radius, Color color=COLOR_ON)
 Draw a straight line at the given angle based on the origin [x, y] from a specified start and stop radius with the given color. More...
 
void horizontal_line (int x, int y, int width, Color color=COLOR_ON)
 Draw a horizontal line from the point [x,y] to [x+width,y] with the given color. More...
 
void vertical_line (int x, int y, int height, Color color=COLOR_ON)
 Draw a vertical line from the point [x,y] to [x,y+width] with the given color. More...
 
void rectangle (int x1, int y1, int width, int height, Color color=COLOR_ON)
 Draw the outline of a rectangle with the top left point at [x1,y1] and the bottom right point at [x1+width,y1+height]. More...
 
void filled_rectangle (int x1, int y1, int width, int height, Color color=COLOR_ON)
 Fill a rectangle with the top left point at [x1,y1] and the bottom right point at [x1+width,y1+height]. More...
 
void circle (int center_x, int center_xy, int radius, Color color=COLOR_ON)
 Draw the outline of a circle centered around [center_x,center_y] with the radius radius with the given color. More...
 
void filled_circle (int center_x, int center_y, int radius, Color color=COLOR_ON)
 Fill a circle centered around [center_x,center_y] with the radius radius with the given color. More...
 
void triangle (int x1, int y1, int x2, int y2, int x3, int y3, Color color=COLOR_ON)
 Draw the outline of a triangle contained between the points [x1,y1], [x2,y2] and [x3,y3] with the given color. More...
 
void filled_triangle (int x1, int y1, int x2, int y2, int x3, int y3, Color color=COLOR_ON)
 Fill a triangle contained between the points [x1,y1], [x2,y2] and [x3,y3] with the given color. More...
 
void get_regular_polygon_vertex (int vertex_id, int *vertex_x, int *vertex_y, int center_x, int center_y, int radius, int edges, RegularPolygonVariation variation=VARIATION_POINTY_TOP, float rotation_degrees=ROTATION_0_DEGREES)
 Get the specified vertex (x,y) coordinates for the regular polygon inscribed in the circle centered on [center_x,center_y] with the given radius. More...
 
void regular_polygon (int x, int y, int radius, int edges, RegularPolygonVariation variation=VARIATION_POINTY_TOP, float rotation_degrees=ROTATION_0_DEGREES, Color color=COLOR_ON, RegularPolygonDrawing drawing=DRAWING_OUTLINE)
 Draw the outline of a regular polygon inscribed in the circle centered on [x,y] with the given radius and color. More...
 
void regular_polygon (int x, int y, int radius, int edges, RegularPolygonVariation variation, Color color, RegularPolygonDrawing drawing=DRAWING_OUTLINE)
 
void regular_polygon (int x, int y, int radius, int edges, Color color, RegularPolygonDrawing drawing=DRAWING_OUTLINE)
 
void filled_regular_polygon (int x, int y, int radius, int edges, RegularPolygonVariation variation=VARIATION_POINTY_TOP, float rotation_degrees=ROTATION_0_DEGREES, Color color=COLOR_ON)
 Fill a regular polygon inscribed in the circle centered on [x,y] with the given radius and color. More...
 
void filled_regular_polygon (int x, int y, int radius, int edges, RegularPolygonVariation variation, Color color)
 
void filled_regular_polygon (int x, int y, int radius, int edges, Color color)
 
void print (int x, int y, BaseFont *font, Color color, TextAlign align, const char *text, Color background=COLOR_OFF)
 Print text with the anchor point at [x,y] with font. More...
 
void print (int x, int y, BaseFont *font, Color color, const char *text, Color background=COLOR_OFF)
 Print text with the top left at [x,y] with font. More...
 
void print (int x, int y, BaseFont *font, TextAlign align, const char *text)
 Print text with the anchor point at [x,y] with font. More...
 
void print (int x, int y, BaseFont *font, const char *text)
 Print text with the top left at [x,y] with font. More...
 
void printf (int x, int y, BaseFont *font, Color color, Color background, TextAlign align, const char *format,...) __attribute__((format(printf
 Evaluate the printf-format format and print the result with the anchor point at [x,y] with font. More...
 
void void printf (int x, int y, BaseFont *font, Color color, TextAlign align, const char *format,...) __attribute__((format(printf
 Evaluate the printf-format format and print the result with the anchor point at [x,y] with font. More...
 
void void void printf (int x, int y, BaseFont *font, Color color, const char *format,...) __attribute__((format(printf
 Evaluate the printf-format format and print the result with the top left at [x,y] with font. More...
 
void void void void printf (int x, int y, BaseFont *font, TextAlign align, const char *format,...) __attribute__((format(printf
 Evaluate the printf-format format and print the result with the anchor point at [x,y] with font. More...
 
void void void void void printf (int x, int y, BaseFont *font, const char *format,...) __attribute__((format(printf
 Evaluate the printf-format format and print the result with the top left at [x,y] with font. More...
 
void void void void void void strftime (int x, int y, BaseFont *font, Color color, TextAlign align, const char *format, ESPTime time) __attribute__((format(strftime
 Evaluate the strftime-format format and print the result with the anchor point at [x,y] with font. More...
 
void void void void void void void strftime (int x, int y, BaseFont *font, Color color, const char *format, ESPTime time) __attribute__((format(strftime
 Evaluate the strftime-format format and print the result with the top left at [x,y] with font. More...
 
void void void void void void void void strftime (int x, int y, BaseFont *font, TextAlign align, const char *format, ESPTime time) __attribute__((format(strftime
 Evaluate the strftime-format format and print the result with the anchor point at [x,y] with font. More...
 
void void void void void void void void void strftime (int x, int y, BaseFont *font, const char *format, ESPTime time) __attribute__((format(strftime
 Evaluate the strftime-format format and print the result with the top left at [x,y] with font. More...
 
void void void void void void void void void void image (int x, int y, BaseImage *image, Color color_on=COLOR_ON, Color color_off=COLOR_OFF)
 Draw the image with the top-left corner at [x,y] to the screen. More...
 
void image (int x, int y, BaseImage *image, ImageAlign align, Color color_on=COLOR_ON, Color color_off=COLOR_OFF)
 Draw the image at [x,y] to the screen. More...
 
void graph (int x, int y, graph::Graph *graph, Color color_on=COLOR_ON)
 Draw the graph with the top-left corner at [x,y] to the screen. More...
 
void legend (int x, int y, graph::Graph *graph, Color color_on=COLOR_ON)
 Draw the legend for graph with the top-left corner at [x,y] to the screen. More...
 
void qr_code (int x, int y, qr_code::QrCode *qr_code, Color color_on=COLOR_ON, int scale=1)
 Draw the qr_code with the top-left corner at [x,y] to the screen. More...
 
void menu (int x, int y, graphical_display_menu::GraphicalDisplayMenu *menu, int width, int height)
 
void get_text_bounds (int x, int y, const char *text, BaseFont *font, TextAlign align, int *x1, int *y1, int *width, int *height)
 Get the text bounds of the given string. More...
 
void set_writer (display_writer_t &&writer)
 Internal method to set the display writer lambda. More...
 
void show_page (DisplayPage *page)
 
void show_next_page ()
 
void show_prev_page ()
 
void set_pages (std::vector< DisplayPage *> pages)
 
const DisplayPageget_active_page () const
 
void add_on_page_change_trigger (DisplayOnPageChangeTrigger *t)
 
void set_rotation (DisplayRotation rotation)
 Internal method to set the display rotation with. More...
 
void set_auto_clear (bool auto_clear_enabled)
 
DisplayRotation get_rotation () const
 
void start_clipping (Rect rect)
 Set the clipping rectangle for further drawing. More...
 
void start_clipping (int16_t left, int16_t top, int16_t right, int16_t bottom)
 
void extend_clipping (Rect rect)
 Add a rectangular region to the invalidation region. More...
 
void extend_clipping (int16_t left, int16_t top, int16_t right, int16_t bottom)
 
void shrink_clipping (Rect rect)
 substract a rectangular region to the invalidation region More...
 
void shrink_clipping (uint16_t left, uint16_t top, uint16_t right, uint16_t bottom)
 
void end_clipping ()
 Reset the invalidation region. More...
 
Rect get_clipping () const
 Get the current the clipping rectangle. More...
 
bool is_clipping () const
 
bool clip (int x, int y)
 Check if pixel is within region of display. More...
 
void test_card ()
 
void show_test_card ()
 
- Public Member Functions inherited from esphome::PollingComponent
 PollingComponent ()
 
 PollingComponent (uint32_t update_interval)
 Initialize this polling component with the given update interval in ms. More...
 
virtual void set_update_interval (uint32_t update_interval)
 Manually set the update interval in ms for this polling object. More...
 
void call_setup () override
 
virtual uint32_t get_update_interval () const
 Get the update interval in ms of this sensor. More...
 
void start_poller ()
 
void stop_poller ()
 
- Public Member Functions inherited from esphome::Component
virtual void loop ()
 This method will be called repeatedly. More...
 
virtual float get_setup_priority () const
 priority of setup(). More...
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed () const
 
bool is_ready () const
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_1MHZ >
 SPIDevice ()
 
 SPIDevice (SPIComponent *parent, GPIOPin *cs_pin)
 
void spi_setup () override
 
void spi_teardown () override
 
void set_spi_parent (SPIComponent *parent)
 
void set_cs_pin (GPIOPin *cs)
 
void set_data_rate (uint32_t data_rate)
 
void set_bit_order (SPIBitOrder order)
 
void set_mode (SPIMode mode)
 
uint8_t read_byte ()
 
void read_array (uint8_t *data, size_t length)
 
void write (uint16_t data, size_t num_bits)
 Write a single data item, up to 32 bits. More...
 
void write_cmd_addr_data (size_t cmd_bits, uint32_t cmd, size_t addr_bits, uint32_t address, const uint8_t *data, size_t length, uint8_t bus_width=1)
 
void write_byte (uint8_t data)
 
void transfer_array (uint8_t *data, size_t length)
 Write the array data, replace with received data. More...
 
void transfer_array (std::array< uint8_t, N > &data)
 
uint8_t transfer_byte (uint8_t data)
 
void write_byte16 (uint16_t data)
 Write 16 bit data. More...
 
void write_array16 (const uint16_t *data, size_t length)
 Write an array of data as 16 bit values, byte-swapping if required. More...
 
void enable ()
 
void disable ()
 
void write_array (const uint8_t *data, size_t length)
 
void write_array (const std::array< uint8_t, N > &data)
 
void write_array (const std::vector< uint8_t > &data)
 
- Public Member Functions inherited from esphome::spi::SPIClient
 SPIClient (SPIBitOrder bit_order, SPIMode mode, uint32_t data_rate)
 
bool spi_is_ready ()
 

Protected Member Functions

void draw_absolute_pixel_internal (int x, int y, Color color) override
 
void draw_pixels_at (int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order, display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override
 
void write_command_ (uint8_t cmd, const uint8_t *bytes, size_t len)
 the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the sample code.) More...
 
void write_command_ (uint8_t cmd, uint8_t data)
 
void write_command_ (uint8_t cmd)
 
void reset_params_ (bool ready=false)
 
void write_init_sequence_ ()
 
void set_addr_window_ (uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
 
- Protected Member Functions inherited from esphome::display::DisplayBuffer
void init_internal_ (uint32_t buffer_length)
 
- Protected Member Functions inherited from esphome::display::Display
bool clamp_x_ (int x, int w, int &min_x, int &max_x)
 
bool clamp_y_ (int y, int h, int &min_y, int &max_y)
 
void vprintf_ (int x, int y, BaseFont *font, Color color, Color background, TextAlign align, const char *format, va_list arg)
 
void do_update_ ()
 
void clear_clipping_ ()
 
void filled_flat_side_triangle_ (int x1, int y1, int x2, int y2, int x3, int y3, Color color)
 This method fills a triangle using only integer variables by using a modified bresenham algorithm. More...
 
void sort_triangle_points_by_y_ (int *x1, int *y1, int *x2, int *y2, int *x3, int *y3)
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 

Protected Attributes

GPIOPinreset_pin_ {nullptr}
 
GPIOPinenable_pin_ {nullptr}
 
uint16_t x_low_ {0}
 
uint16_t y_low_ {0}
 
uint16_t x_high_ {0}
 
uint16_t y_high_ {0}
 
bool setup_complete_ {}
 
bool invert_colors_ {}
 
display::ColorOrder color_mode_ {display::COLOR_ORDER_BGR}
 
size_t width_ {}
 
size_t height_ {}
 
int16_t offset_x_ {0}
 
int16_t offset_y_ {0}
 
bool swap_xy_ {}
 
bool mirror_x_ {}
 
bool mirror_y_ {}
 
uint8_t brightness_ {0xD0}
 
Model model_ {RM690B0}
 
esp_lcd_panel_handle_t handle_ {}
 
- Protected Attributes inherited from esphome::display::DisplayBuffer
uint8_t * buffer_ {nullptr}
 
- Protected Attributes inherited from esphome::display::Display
DisplayRotation rotation_ {DISPLAY_ROTATION_0_DEGREES}
 
optional< display_writer_twriter_ {}
 
DisplayPagepage_ {nullptr}
 
DisplayPageprevious_page_ {nullptr}
 
std::vector< DisplayOnPageChangeTrigger * > on_page_change_triggers_
 
bool auto_clear_enabled_ {true}
 
std::vector< Rectclipping_rectangle_
 
bool show_test_card_ {false}
 
- Protected Attributes inherited from esphome::PollingComponent
uint32_t update_interval_
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::spi::SPIClient
SPIBitOrder bit_order_ {BIT_ORDER_MSB_FIRST}
 
SPIMode mode_ {MODE0}
 
uint32_t data_rate_ {1000000}
 
SPIComponentparent_ {nullptr}
 
GPIOPincs_ {nullptr}
 
SPIDelegatedelegate_ {nullptr}
 

Detailed Description

Definition at line 56 of file qspi_amoled.h.

Member Function Documentation

◆ can_proceed()

bool esphome::qspi_amoled::QspiAmoLed::can_proceed ( )
inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 101 of file qspi_amoled.h.

◆ draw_absolute_pixel_internal()

void esphome::qspi_amoled::QspiAmoLed::draw_absolute_pixel_internal ( int  x,
int  y,
Color  color 
)
overrideprotectedvirtual

Implements esphome::display::DisplayBuffer.

Definition at line 56 of file qspi_amoled.cpp.

◆ draw_pixels_at()

void esphome::qspi_amoled::QspiAmoLed::draw_pixels_at ( int  x_start,
int  y_start,
int  w,
int  h,
const uint8_t *  ptr,
display::ColorOrder  order,
display::ColorBitness  bitness,
bool  big_endian,
int  x_offset,
int  y_offset,
int  x_pad 
)
overrideprotectedvirtual

Reimplemented from esphome::display::Display.

Definition at line 143 of file qspi_amoled.cpp.

◆ dump_config()

void esphome::qspi_amoled::QspiAmoLed::dump_config ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 170 of file qspi_amoled.cpp.

◆ get_color_mode()

display::ColorOrder esphome::qspi_amoled::QspiAmoLed::get_color_mode ( )
inline

Definition at line 63 of file qspi_amoled.h.

◆ get_display_type()

display::DisplayType esphome::qspi_amoled::QspiAmoLed::get_display_type ( )
inlineoverridevirtual

Implements esphome::display::Display.

Definition at line 96 of file qspi_amoled.h.

◆ get_height_internal()

int esphome::qspi_amoled::QspiAmoLed::get_height_internal ( )
inlineoverridevirtual

Implements esphome::display::Display.

Definition at line 100 of file qspi_amoled.h.

◆ get_width_internal()

int esphome::qspi_amoled::QspiAmoLed::get_width_internal ( )
inlineoverridevirtual

Implements esphome::display::Display.

Definition at line 99 of file qspi_amoled.h.

◆ reset_params_()

void esphome::qspi_amoled::QspiAmoLed::reset_params_ ( bool  ready = false)
protected

Definition at line 93 of file qspi_amoled.cpp.

◆ set_addr_window_()

void esphome::qspi_amoled::QspiAmoLed::set_addr_window_ ( uint16_t  x1,
uint16_t  y1,
uint16_t  x2,
uint16_t  y2 
)
protected

Definition at line 129 of file qspi_amoled.cpp.

◆ set_brightness()

void esphome::qspi_amoled::QspiAmoLed::set_brightness ( uint8_t  brightness)
inline

Definition at line 88 of file qspi_amoled.h.

◆ set_color_mode()

void esphome::qspi_amoled::QspiAmoLed::set_color_mode ( display::ColorOrder  color_mode)
inline

Definition at line 64 of file qspi_amoled.h.

◆ set_dimensions()

void esphome::qspi_amoled::QspiAmoLed::set_dimensions ( uint16_t  width,
uint16_t  height 
)
inline

Definition at line 68 of file qspi_amoled.h.

◆ set_enable_pin()

void esphome::qspi_amoled::QspiAmoLed::set_enable_pin ( GPIOPin enable_pin)
inline

Definition at line 67 of file qspi_amoled.h.

◆ set_invert_colors()

void esphome::qspi_amoled::QspiAmoLed::set_invert_colors ( bool  invert_colors)
inline

Definition at line 72 of file qspi_amoled.h.

◆ set_mirror_x()

void esphome::qspi_amoled::QspiAmoLed::set_mirror_x ( bool  mirror_x)
inline

Definition at line 76 of file qspi_amoled.h.

◆ set_mirror_y()

void esphome::qspi_amoled::QspiAmoLed::set_mirror_y ( bool  mirror_y)
inline

Definition at line 80 of file qspi_amoled.h.

◆ set_model()

void esphome::qspi_amoled::QspiAmoLed::set_model ( Model  model)
inline

Definition at line 60 of file qspi_amoled.h.

◆ set_offsets()

void esphome::qspi_amoled::QspiAmoLed::set_offsets ( int16_t  offset_x,
int16_t  offset_y 
)
inline

Definition at line 92 of file qspi_amoled.h.

◆ set_reset_pin()

void esphome::qspi_amoled::QspiAmoLed::set_reset_pin ( GPIOPin reset_pin)
inline

Definition at line 66 of file qspi_amoled.h.

◆ set_swap_xy()

void esphome::qspi_amoled::QspiAmoLed::set_swap_xy ( bool  swap_xy)
inline

Definition at line 84 of file qspi_amoled.h.

◆ setup()

void esphome::qspi_amoled::QspiAmoLed::setup ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 8 of file qspi_amoled.cpp.

◆ update()

void esphome::qspi_amoled::QspiAmoLed::update ( )
overridevirtual

Implements esphome::PollingComponent.

Definition at line 27 of file qspi_amoled.cpp.

◆ write_command_() [1/3]

void esphome::qspi_amoled::QspiAmoLed::write_command_ ( uint8_t  cmd,
const uint8_t *  bytes,
size_t  len 
)
inlineprotected

the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the sample code.)

Immediately after enabling /CS send 4 bytes in single-dataline SPI mode: 0: either 0x2 or 0x32. The first indicates that any subsequent data bytes after the initial 4 will be sent in 1-dataline SPI. The second indicates quad mode. 1: 0x00 2: The command (register address) byte. 3: 0x00

This is followed by zero or more data bytes in either 1-wire or 4-wire mode, depending on the first byte. At the conclusion of the write, de-assert /CS.

Parameters
cmd
bytes
len

Definition at line 125 of file qspi_amoled.h.

◆ write_command_() [2/3]

void esphome::qspi_amoled::QspiAmoLed::write_command_ ( uint8_t  cmd,
uint8_t  data 
)
inlineprotected

Definition at line 131 of file qspi_amoled.h.

◆ write_command_() [3/3]

void esphome::qspi_amoled::QspiAmoLed::write_command_ ( uint8_t  cmd)
inlineprotected

Definition at line 132 of file qspi_amoled.h.

◆ write_init_sequence_()

void esphome::qspi_amoled::QspiAmoLed::write_init_sequence_ ( )
protected

Definition at line 109 of file qspi_amoled.cpp.

Field Documentation

◆ brightness_

uint8_t esphome::qspi_amoled::QspiAmoLed::brightness_ {0xD0}
protected

Definition at line 154 of file qspi_amoled.h.

◆ color_mode_

display::ColorOrder esphome::qspi_amoled::QspiAmoLed::color_mode_ {display::COLOR_ORDER_BGR}
protected

Definition at line 146 of file qspi_amoled.h.

◆ enable_pin_

GPIOPin* esphome::qspi_amoled::QspiAmoLed::enable_pin_ {nullptr}
protected

Definition at line 138 of file qspi_amoled.h.

◆ handle_

esp_lcd_panel_handle_t esphome::qspi_amoled::QspiAmoLed::handle_ {}
protected

Definition at line 157 of file qspi_amoled.h.

◆ height_

size_t esphome::qspi_amoled::QspiAmoLed::height_ {}
protected

Definition at line 148 of file qspi_amoled.h.

◆ invert_colors_

bool esphome::qspi_amoled::QspiAmoLed::invert_colors_ {}
protected

Definition at line 145 of file qspi_amoled.h.

◆ mirror_x_

bool esphome::qspi_amoled::QspiAmoLed::mirror_x_ {}
protected

Definition at line 152 of file qspi_amoled.h.

◆ mirror_y_

bool esphome::qspi_amoled::QspiAmoLed::mirror_y_ {}
protected

Definition at line 153 of file qspi_amoled.h.

◆ model_

Model esphome::qspi_amoled::QspiAmoLed::model_ {RM690B0}
protected

Definition at line 155 of file qspi_amoled.h.

◆ offset_x_

int16_t esphome::qspi_amoled::QspiAmoLed::offset_x_ {0}
protected

Definition at line 149 of file qspi_amoled.h.

◆ offset_y_

int16_t esphome::qspi_amoled::QspiAmoLed::offset_y_ {0}
protected

Definition at line 150 of file qspi_amoled.h.

◆ reset_pin_

GPIOPin* esphome::qspi_amoled::QspiAmoLed::reset_pin_ {nullptr}
protected

Definition at line 137 of file qspi_amoled.h.

◆ setup_complete_

bool esphome::qspi_amoled::QspiAmoLed::setup_complete_ {}
protected

Definition at line 143 of file qspi_amoled.h.

◆ swap_xy_

bool esphome::qspi_amoled::QspiAmoLed::swap_xy_ {}
protected

Definition at line 151 of file qspi_amoled.h.

◆ width_

size_t esphome::qspi_amoled::QspiAmoLed::width_ {}
protected

Definition at line 147 of file qspi_amoled.h.

◆ x_high_

uint16_t esphome::qspi_amoled::QspiAmoLed::x_high_ {0}
protected

Definition at line 141 of file qspi_amoled.h.

◆ x_low_

uint16_t esphome::qspi_amoled::QspiAmoLed::x_low_ {0}
protected

Definition at line 139 of file qspi_amoled.h.

◆ y_high_

uint16_t esphome::qspi_amoled::QspiAmoLed::y_high_ {0}
protected

Definition at line 142 of file qspi_amoled.h.

◆ y_low_

uint16_t esphome::qspi_amoled::QspiAmoLed::y_low_ {0}
protected

Definition at line 140 of file qspi_amoled.h.


The documentation for this class was generated from the following files: