#include <hub.h>

Inheritance diagram for esphome::opentherm::OpenthermHub:

Public Member Functions
	OpenthermHub ()

void	process_response (OpenthermData &data)

void	set_in_pin (InternalGPIOPin *in_pin)

void	set_out_pin (InternalGPIOPin *out_pin)

void	add_initial_message (MessageId message_id)

void	add_repeating_message (MessageId message_id)

void	set_ch_enable (bool value)

void	set_dhw_enable (bool value)

void	set_cooling_enable (bool value)

void	set_otc_active (bool value)

void	set_ch2_active (bool value)

void	set_sync_mode (bool sync_mode)

float	get_setup_priority () const override

void	setup () override

void	on_shutdown () override

void	loop () override

void	dump_config () override

Public Member Functions inherited from esphome::Component
float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Data Fields
bool	ch_enable = true

bool	dhw_enable = true

bool	cooling_enable = false

bool	otc_active = false

bool	ch2_active = false

Protected Member Functions
OpenthermData	build_request_ (MessageId request_id)

void	handle_protocol_write_error_ ()

void	handle_protocol_read_error_ ()

void	handle_timeout_error_ ()

void	stop_opentherm_ ()

void	start_conversation_ ()

void	read_response_ ()

bool	check_timings_ (uint32_t cur_time)

bool	should_skip_loop_ (uint32_t cur_time) const

void	sync_loop_ ()

template<typename F >
bool	spin_wait_ (uint32_t timeout, F func)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
InternalGPIOPin *	in_pin_

InternalGPIOPin *	out_pin_

std::unique_ptr< OpenTherm >	opentherm_

std::unordered_set< MessageId >	initial_messages_

std::unordered_set< MessageId >	repeating_messages_

bool	sending_initial_ = true

std::unordered_set< MessageId >::const_iterator	current_message_iterator_

uint32_t	last_conversation_start_ = 0

uint32_t	last_conversation_end_ = 0

OperationMode	last_mode_ = IDLE

OpenthermData	last_request_

bool	sync_mode_ = false

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Detailed Description

Definition at line 19 of file hub.h.

Constructor & Destructor Documentation

◆ OpenthermHub()

esphome::opentherm::OpenthermHub::OpenthermHub ( )

Definition at line 48 of file hub.cpp.

Member Function Documentation

◆ add_initial_message()

void esphome::opentherm::OpenthermHub::add_initial_message ( MessageId message_id )

inline

Definition at line 82 of file hub.h.

◆ add_repeating_message()

void esphome::opentherm::OpenthermHub::add_repeating_message ( MessageId message_id )

inline

Definition at line 87 of file hub.h.

◆ build_request_()

OpenthermData esphome::opentherm::OpenthermHub::build_request_ ( MessageId request_id )

protected

Definition at line 11 of file hub.cpp.

◆ check_timings_()

bool esphome::opentherm::OpenthermHub::check_timings_ ( uint32_t cur_time )

protected

Definition at line 180 of file hub.cpp.

◆ dump_config()

void esphome::opentherm::OpenthermHub::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 261 of file hub.cpp.

◆ get_setup_priority()

float esphome::opentherm::OpenthermHub::get_setup_priority ( ) const

inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 101 of file hub.h.

◆ handle_protocol_read_error_()

void esphome::opentherm::OpenthermHub::handle_protocol_read_error_ ( )

protected

Definition at line 246 of file hub.cpp.

◆ handle_protocol_write_error_()

void esphome::opentherm::OpenthermHub::handle_protocol_write_error_ ( )

protected

Definition at line 240 of file hub.cpp.

◆ handle_timeout_error_()

void esphome::opentherm::OpenthermHub::handle_timeout_error_ ( )

protected

Definition at line 252 of file hub.cpp.

◆ loop()

void esphome::opentherm::OpenthermHub::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 75 of file hub.cpp.

◆ on_shutdown()

void esphome::opentherm::OpenthermHub::on_shutdown ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 73 of file hub.cpp.

◆ process_response()

void esphome::opentherm::OpenthermHub::process_response ( OpenthermData & data )

Definition at line 50 of file hub.cpp.

◆ read_response_()

void esphome::opentherm::OpenthermHub::read_response_ ( )

protected

Definition at line 220 of file hub.cpp.

◆ set_ch2_active()

void esphome::opentherm::OpenthermHub::set_ch2_active ( bool value )

inline

Definition at line 98 of file hub.h.

◆ set_ch_enable()

void esphome::opentherm::OpenthermHub::set_ch_enable ( bool value )

inline

Definition at line 94 of file hub.h.

◆ set_cooling_enable()

void esphome::opentherm::OpenthermHub::set_cooling_enable ( bool value )

inline

Definition at line 96 of file hub.h.

◆ set_dhw_enable()

void esphome::opentherm::OpenthermHub::set_dhw_enable ( bool value )

inline

Definition at line 95 of file hub.h.

◆ set_in_pin()

void esphome::opentherm::OpenthermHub::set_in_pin ( InternalGPIOPin * in_pin )

inline

Definition at line 78 of file hub.h.

◆ set_otc_active()

void esphome::opentherm::OpenthermHub::set_otc_active ( bool value )

inline

Definition at line 97 of file hub.h.

◆ set_out_pin()

void esphome::opentherm::OpenthermHub::set_out_pin ( InternalGPIOPin * out_pin )

inline

Definition at line 79 of file hub.h.

◆ set_sync_mode()

void esphome::opentherm::OpenthermHub::set_sync_mode ( bool sync_mode )

inline

Definition at line 99 of file hub.h.

◆ setup()

void esphome::opentherm::OpenthermHub::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 56 of file hub.cpp.

◆ should_skip_loop_()

bool esphome::opentherm::OpenthermHub::should_skip_loop_ ( uint32_t cur_time ) const

protected

Definition at line 193 of file hub.cpp.

◆ spin_wait_()

template<typename F >

bool esphome::opentherm::OpenthermHub::spin_wait_	(	uint32_t	timeout,
		F	func
	)

inlineprotected

Definition at line 58 of file hub.h.

◆ start_conversation_()

void esphome::opentherm::OpenthermHub::start_conversation_ ( )

protected

Definition at line 202 of file hub.cpp.

◆ stop_opentherm_()

void esphome::opentherm::OpenthermHub::stop_opentherm_ ( )

protected

Definition at line 235 of file hub.cpp.

◆ sync_loop_()

void esphome::opentherm::OpenthermHub::sync_loop_ ( )

protected

Definition at line 121 of file hub.cpp.

Field Documentation

◆ ch2_active

bool esphome::opentherm::OpenthermHub::ch2_active = false

Definition at line 91 of file hub.h.

◆ ch_enable

bool esphome::opentherm::OpenthermHub::ch_enable = true

Definition at line 91 of file hub.h.

◆ cooling_enable

bool esphome::opentherm::OpenthermHub::cooling_enable = false

Definition at line 91 of file hub.h.

◆ current_message_iterator_

std::unordered_set<MessageId>::const_iterator esphome::opentherm::OpenthermHub::current_message_iterator_

protected

Definition at line 34 of file hub.h.

◆ dhw_enable

bool esphome::opentherm::OpenthermHub::dhw_enable = true

Definition at line 91 of file hub.h.

◆ in_pin_

InternalGPIOPin* esphome::opentherm::OpenthermHub::in_pin_

protected

Definition at line 22 of file hub.h.

◆ initial_messages_

std::unordered_set<MessageId> esphome::opentherm::OpenthermHub::initial_messages_

protected

Definition at line 27 of file hub.h.

◆ last_conversation_end_

uint32_t esphome::opentherm::OpenthermHub::last_conversation_end_ = 0

protected

Definition at line 37 of file hub.h.

◆ last_conversation_start_

uint32_t esphome::opentherm::OpenthermHub::last_conversation_start_ = 0

protected

Definition at line 36 of file hub.h.

◆ last_mode_

OperationMode esphome::opentherm::OpenthermHub::last_mode_ = IDLE

protected

Definition at line 38 of file hub.h.

◆ last_request_

OpenthermData esphome::opentherm::OpenthermHub::last_request_

protected

Definition at line 39 of file hub.h.

◆ opentherm_

std::unique_ptr<OpenTherm> esphome::opentherm::OpenthermHub::opentherm_

protected

Definition at line 24 of file hub.h.

◆ otc_active

bool esphome::opentherm::OpenthermHub::otc_active = false

Definition at line 91 of file hub.h.

◆ out_pin_

InternalGPIOPin * esphome::opentherm::OpenthermHub::out_pin_

protected

Definition at line 22 of file hub.h.

◆ repeating_messages_

std::unordered_set<MessageId> esphome::opentherm::OpenthermHub::repeating_messages_

protected

Definition at line 30 of file hub.h.

◆ sending_initial_

bool esphome::opentherm::OpenthermHub::sending_initial_ = true

protected

Definition at line 32 of file hub.h.

◆ sync_mode_

bool esphome::opentherm::OpenthermHub::sync_mode_ = false

protected

Definition at line 44 of file hub.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/opentherm/hub.h
/opt/build/esphome/esphome/components/opentherm/hub.cpp

Public Member Functions

Data Fields

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ OpenthermHub()

Member Function Documentation

◆ add_initial_message()

◆ add_repeating_message()

◆ build_request_()

◆ check_timings_()

◆ dump_config()

◆ get_setup_priority()

◆ handle_protocol_read_error_()

◆ handle_protocol_write_error_()

◆ handle_timeout_error_()

◆ loop()

◆ on_shutdown()

◆ process_response()

◆ read_response_()

◆ set_ch2_active()

◆ set_ch_enable()

◆ set_cooling_enable()

◆ set_dhw_enable()

◆ set_in_pin()

◆ set_otc_active()

◆ set_out_pin()

◆ set_sync_mode()

◆ setup()

◆ should_skip_loop_()

◆ spin_wait_()

◆ start_conversation_()

◆ stop_opentherm_()

◆ sync_loop_()

Field Documentation

◆ ch2_active

◆ ch_enable

◆ cooling_enable

◆ current_message_iterator_

◆ dhw_enable

◆ in_pin_

◆ initial_messages_

◆ last_conversation_end_

◆ last_conversation_start_

◆ last_mode_

◆ last_request_

◆ opentherm_

◆ otc_active

◆ out_pin_

◆ repeating_messages_

◆ sending_initial_

◆ sync_mode_