#include <mcp3008.h>

Inheritance diagram for esphome::mcp3008::MCP3008:

Public Member Functions
void	setup () override

void	dump_config () override

float	get_setup_priority () const override

float	read_data (uint8_t pin)

Public Member Functions inherited from esphome::Component
virtual void	loop ()
	This method will be called repeatedly. More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Public Member Functions inherited from esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_75KHZ >
	SPIDevice ()

	SPIDevice (SPIComponent parent, GPIOPin cs_pin)

void	spi_setup () override

void	spi_teardown () override

void	set_spi_parent (SPIComponent *parent)

void	set_cs_pin (GPIOPin *cs)

void	set_data_rate (uint32_t data_rate)

void	set_bit_order (SPIBitOrder order)

void	set_mode (SPIMode mode)

uint8_t	read_byte ()

void	read_array (uint8_t *data, size_t length)

void	write (uint16_t data, size_t num_bits)
	Write a single data item, up to 32 bits. More...

void	write_cmd_addr_data (size_t cmd_bits, uint32_t cmd, size_t addr_bits, uint32_t address, const uint8_t *data, size_t length, uint8_t bus_width=1)

void	write_byte (uint8_t data)

void	transfer_array (uint8_t *data, size_t length)
	Write the array data, replace with received data. More...

void	transfer_array (std::array< uint8_t, N > &data)

uint8_t	transfer_byte (uint8_t data)

void	write_byte16 (uint16_t data)
	Write 16 bit data. More...

void	write_array16 (const uint16_t *data, size_t length)
	Write an array of data as 16 bit values, byte-swapping if required. More...

void	enable ()

void	disable ()

void	write_array (const uint8_t *data, size_t length)

void	write_array (const std::array< uint8_t, N > &data)

void	write_array (const std::vector< uint8_t > &data)

Public Member Functions inherited from esphome::spi::SPIClient
	SPIClient (SPIBitOrder bit_order, SPIMode mode, uint32_t data_rate)

bool	spi_is_ready ()

Additional Inherited Members
Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Protected Attributes inherited from esphome::spi::SPIClient
SPIBitOrder	bit_order_ {BIT_ORDER_MSB_FIRST}

SPIMode	mode_ {MODE0}

uint32_t	data_rate_ {1000000}

SPIComponent *	parent_ {nullptr}

GPIOPin *	cs_ {nullptr}

SPIDelegate *	delegate_ {nullptr}

Detailed Description

Definition at line 10 of file mcp3008.h.

Member Function Documentation

◆ dump_config()

void esphome::mcp3008::MCP3008::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 18 of file mcp3008.cpp.

◆ get_setup_priority()

float esphome::mcp3008::MCP3008::get_setup_priority ( ) const

overridevirtual

Reimplemented from esphome::Component.

Definition at line 11 of file mcp3008.cpp.

◆ read_data()

float esphome::mcp3008::MCP3008::read_data ( uint8_t pin )

Definition at line 23 of file mcp3008.cpp.

◆ setup()

void esphome::mcp3008::MCP3008::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 13 of file mcp3008.cpp.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/mcp3008/mcp3008.h
/opt/build/esphome/esphome/components/mcp3008/mcp3008.cpp

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ dump_config()

◆ get_setup_priority()

◆ read_data()

◆ setup()