ESPHome  2024.11.2
Public Member Functions | Protected Member Functions | Protected Attributes
esphome::max31856::MAX31856Sensor Class Reference

#include <max31856.h>

Inheritance diagram for esphome::max31856::MAX31856Sensor:
esphome::sensor::Sensor esphome::PollingComponent esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_4MHZ > esphome::EntityBase esphome::EntityBase_DeviceClass esphome::EntityBase_UnitOfMeasurement esphome::Component esphome::spi::SPIClient

Public Member Functions

void setup () override
 
void dump_config () override
 
float get_setup_priority () const override
 
void set_filter (MAX31856ConfigFilter filter)
 
void set_thermocouple_type (MAX31856ThermocoupleType thermocouple_type)
 
void update () override
 
- Public Member Functions inherited from esphome::sensor::Sensor
 Sensor ()
 
int8_t get_accuracy_decimals ()
 Get the accuracy in decimals, using the manual override if set. More...
 
void set_accuracy_decimals (int8_t accuracy_decimals)
 Manually set the accuracy in decimals. More...
 
StateClass get_state_class ()
 Get the state class, using the manual override if set. More...
 
void set_state_class (StateClass state_class)
 Manually set the state class. More...
 
bool get_force_update () const
 Get whether force update mode is enabled. More...
 
void set_force_update (bool force_update)
 Set force update mode. More...
 
void add_filter (Filter *filter)
 Add a filter to the filter chain. Will be appended to the back. More...
 
void add_filters (const std::vector< Filter *> &filters)
 Add a list of vectors to the back of the filter chain. More...
 
void set_filters (const std::vector< Filter *> &filters)
 Clear the filters and replace them by filters. More...
 
void clear_filters ()
 Clear the entire filter chain. More...
 
float get_state () const
 Getter-syntax for .state. More...
 
float get_raw_state () const
 Getter-syntax for .raw_state. More...
 
void publish_state (float state)
 Publish a new state to the front-end. More...
 
void add_on_state_callback (std::function< void(float)> &&callback)
 Add a callback that will be called every time a filtered value arrives. More...
 
void add_on_raw_state_callback (std::function< void(float)> &&callback)
 Add a callback that will be called every time the sensor sends a raw value. More...
 
bool has_state () const
 Return whether this sensor has gotten a full state (that passed through all filters) yet. More...
 
virtual std::string unique_id ()
 Override this method to set the unique ID of this sensor. More...
 
void internal_send_state_to_frontend (float state)
 
- Public Member Functions inherited from esphome::EntityBase
const StringRefget_name () const
 
void set_name (const char *name)
 
bool has_own_name () const
 
std::string get_object_id () const
 
void set_object_id (const char *object_id)
 
uint32_t get_object_id_hash ()
 
bool is_internal () const
 
void set_internal (bool internal)
 
bool is_disabled_by_default () const
 
void set_disabled_by_default (bool disabled_by_default)
 
EntityCategory get_entity_category () const
 
void set_entity_category (EntityCategory entity_category)
 
std::string get_icon () const
 
void set_icon (const char *icon)
 
- Public Member Functions inherited from esphome::EntityBase_DeviceClass
std::string get_device_class ()
 Get the device class, using the manual override if set. More...
 
void set_device_class (const char *device_class)
 Manually set the device class. More...
 
- Public Member Functions inherited from esphome::EntityBase_UnitOfMeasurement
std::string get_unit_of_measurement ()
 Get the unit of measurement, using the manual override if set. More...
 
void set_unit_of_measurement (const char *unit_of_measurement)
 Manually set the unit of measurement. More...
 
- Public Member Functions inherited from esphome::PollingComponent
 PollingComponent ()
 
 PollingComponent (uint32_t update_interval)
 Initialize this polling component with the given update interval in ms. More...
 
virtual void set_update_interval (uint32_t update_interval)
 Manually set the update interval in ms for this polling object. More...
 
void call_setup () override
 
virtual uint32_t get_update_interval () const
 Get the update interval in ms of this sensor. More...
 
void start_poller ()
 
void stop_poller ()
 
- Public Member Functions inherited from esphome::Component
virtual void loop ()
 This method will be called repeatedly. More...
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed () const
 
bool is_ready () const
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_4MHZ >
 SPIDevice ()
 
 SPIDevice (SPIComponent *parent, GPIOPin *cs_pin)
 
void spi_setup () override
 
void spi_teardown () override
 
void set_spi_parent (SPIComponent *parent)
 
void set_cs_pin (GPIOPin *cs)
 
void set_data_rate (uint32_t data_rate)
 
void set_bit_order (SPIBitOrder order)
 
void set_mode (SPIMode mode)
 
uint8_t read_byte ()
 
void read_array (uint8_t *data, size_t length)
 
void write (uint16_t data, size_t num_bits)
 Write a single data item, up to 32 bits. More...
 
void write_cmd_addr_data (size_t cmd_bits, uint32_t cmd, size_t addr_bits, uint32_t address, const uint8_t *data, size_t length, uint8_t bus_width=1)
 
void write_byte (uint8_t data)
 
void transfer_array (uint8_t *data, size_t length)
 Write the array data, replace with received data. More...
 
void transfer_array (std::array< uint8_t, N > &data)
 
uint8_t transfer_byte (uint8_t data)
 
void write_byte16 (uint16_t data)
 Write 16 bit data. More...
 
void write_array16 (const uint16_t *data, size_t length)
 Write an array of data as 16 bit values, byte-swapping if required. More...
 
void enable ()
 
void disable ()
 
void write_array (const uint8_t *data, size_t length)
 
void write_array (const std::array< uint8_t, N > &data)
 
void write_array (const std::vector< uint8_t > &data)
 
- Public Member Functions inherited from esphome::spi::SPIClient
 SPIClient (SPIBitOrder bit_order, SPIMode mode, uint32_t data_rate)
 
bool spi_is_ready ()
 

Protected Member Functions

uint8_t read_register_ (uint8_t reg)
 
uint32_t read_register24_ (uint8_t reg)
 
void write_register_ (uint8_t reg, uint8_t value)
 
void one_shot_temperature_ ()
 
bool has_fault_ ()
 
void clear_fault_ ()
 
void read_thermocouple_temperature_ ()
 
void set_thermocouple_type_ ()
 
void set_noise_filter_ ()
 
- Protected Member Functions inherited from esphome::EntityBase
virtual uint32_t hash_base ()
 The hash_base() function has been deprecated. More...
 
void calc_object_id_ ()
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 

Protected Attributes

MAX31856ConfigFilter filter_
 
MAX31856ThermocoupleType thermocouple_type_
 
- Protected Attributes inherited from esphome::sensor::Sensor
CallbackManager< void(float)> raw_callback_
 Storage for raw state callbacks. More...
 
CallbackManager< void(float)> callback_
 Storage for filtered state callbacks. More...
 
Filterfilter_list_ {nullptr}
 Store all active filters. More...
 
optional< int8_t > accuracy_decimals_
 Accuracy in decimals override. More...
 
optional< StateClassstate_class_ {STATE_CLASS_NONE}
 State class override. More...
 
bool force_update_ {false}
 Force update mode. More...
 
bool has_state_ {false}
 
- Protected Attributes inherited from esphome::EntityBase
StringRef name_
 
const char * object_id_c_str_ {nullptr}
 
const char * icon_c_str_ {nullptr}
 
uint32_t object_id_hash_
 
bool has_own_name_ {false}
 
bool internal_ {false}
 
bool disabled_by_default_ {false}
 
EntityCategory entity_category_ {ENTITY_CATEGORY_NONE}
 
- Protected Attributes inherited from esphome::EntityBase_DeviceClass
const char * device_class_ {nullptr}
 Device class override. More...
 
- Protected Attributes inherited from esphome::EntityBase_UnitOfMeasurement
const char * unit_of_measurement_ {nullptr}
 Unit of measurement override. More...
 
- Protected Attributes inherited from esphome::PollingComponent
uint32_t update_interval_
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::spi::SPIClient
SPIBitOrder bit_order_ {BIT_ORDER_MSB_FIRST}
 
SPIMode mode_ {MODE0}
 
uint32_t data_rate_ {1000000}
 
SPIComponentparent_ {nullptr}
 
GPIOPincs_ {nullptr}
 
SPIDelegatedelegate_ {nullptr}
 

Additional Inherited Members

- Data Fields inherited from esphome::sensor::Sensor
float state
 This member variable stores the last state that has passed through all filters. More...
 
float raw_state
 This member variable stores the current raw state of the sensor, without any filters applied. More...
 

Detailed Description

Definition at line 72 of file max31856.h.

Member Function Documentation

◆ clear_fault_()

void esphome::max31856::MAX31856Sensor::clear_fault_ ( )
protected

Definition at line 127 of file max31856.cpp.

◆ dump_config()

void esphome::max31856::MAX31856Sensor::dump_config ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 30 of file max31856.cpp.

◆ get_setup_priority()

float esphome::max31856::MAX31856Sensor::get_setup_priority ( ) const
overridevirtual

Reimplemented from esphome::Component.

Definition at line 206 of file max31856.cpp.

◆ has_fault_()

bool esphome::max31856::MAX31856Sensor::has_fault_ ( )
protected

Definition at line 86 of file max31856.cpp.

◆ one_shot_temperature_()

void esphome::max31856::MAX31856Sensor::one_shot_temperature_ ( )
protected

Definition at line 74 of file max31856.cpp.

◆ read_register24_()

uint32_t esphome::max31856::MAX31856Sensor::read_register24_ ( uint8_t  reg)
protected

Definition at line 189 of file max31856.cpp.

◆ read_register_()

uint8_t esphome::max31856::MAX31856Sensor::read_register_ ( uint8_t  reg)
protected

Definition at line 177 of file max31856.cpp.

◆ read_thermocouple_temperature_()

void esphome::max31856::MAX31856Sensor::read_thermocouple_temperature_ ( )
protected

Definition at line 54 of file max31856.cpp.

◆ set_filter()

void esphome::max31856::MAX31856Sensor::set_filter ( MAX31856ConfigFilter  filter)
inline

Definition at line 80 of file max31856.h.

◆ set_noise_filter_()

void esphome::max31856::MAX31856Sensor::set_noise_filter_ ( )
protected

Definition at line 151 of file max31856.cpp.

◆ set_thermocouple_type()

void esphome::max31856::MAX31856Sensor::set_thermocouple_type ( MAX31856ThermocoupleType  thermocouple_type)
inline

Definition at line 81 of file max31856.h.

◆ set_thermocouple_type_()

void esphome::max31856::MAX31856Sensor::set_thermocouple_type_ ( )
protected

Definition at line 137 of file max31856.cpp.

◆ setup()

void esphome::max31856::MAX31856Sensor::setup ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 13 of file max31856.cpp.

◆ update()

void esphome::max31856::MAX31856Sensor::update ( )
overridevirtual

Implements esphome::PollingComponent.

Definition at line 44 of file max31856.cpp.

◆ write_register_()

void esphome::max31856::MAX31856Sensor::write_register_ ( uint8_t  reg,
uint8_t  value 
)
protected

Definition at line 164 of file max31856.cpp.

Field Documentation

◆ filter_

MAX31856ConfigFilter esphome::max31856::MAX31856Sensor::filter_
protected

Definition at line 87 of file max31856.h.

◆ thermocouple_type_

MAX31856ThermocoupleType esphome::max31856::MAX31856Sensor::thermocouple_type_
protected

Definition at line 88 of file max31856.h.


The documentation for this class was generated from the following files: