#include <hlw8012.h>

Inheritance diagram for esphome::hlw8012::HLW8012Component:

Public Member Functions
	HLW8012Component ()

void	setup () override

void	dump_config () override

float	get_setup_priority () const override

void	update () override

void	set_initial_mode (HLW8012InitialMode initial_mode)

void	set_sensor_model (HLW8012SensorModels sensor_model)

void	set_change_mode_every (uint32_t change_mode_every)

void	set_current_resistor (float current_resistor)

void	set_voltage_divider (float voltage_divider)

void	set_sel_pin (GPIOPin *sel_pin)

void	set_cf_pin (InternalGPIOPin *cf_pin)

void	set_cf1_pin (InternalGPIOPin *cf1_pin)

void	set_voltage_sensor (sensor::Sensor *voltage_sensor)

void	set_current_sensor (sensor::Sensor *current_sensor)

void	set_power_sensor (sensor::Sensor *power_sensor)

void	set_energy_sensor (sensor::Sensor *energy_sensor)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms. More...

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object. More...

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor. More...

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual void	loop ()
	This method will be called repeatedly. More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Protected Attributes
uint32_t	nth_value_ {0}

bool	current_mode_ {false}

uint32_t	change_mode_at_ {0}

uint32_t	change_mode_every_ {8}

float	current_resistor_ {0.001}

float	voltage_divider_ {2351}

HLW8012SensorModels	sensor_model_ {HLW8012_SENSOR_MODEL_HLW8012}

uint64_t	cf_total_pulses_ {0}

GPIOPin *	sel_pin_

InternalGPIOPin *	cf_pin_

pulse_counter::PulseCounterStorageBase &	cf_store_

InternalGPIOPin *	cf1_pin_

pulse_counter::PulseCounterStorageBase &	cf1_store_

sensor::Sensor *	voltage_sensor_ {nullptr}

sensor::Sensor *	current_sensor_ {nullptr}

sensor::Sensor *	power_sensor_ {nullptr}

sensor::Sensor *	energy_sensor_ {nullptr}

float	voltage_multiplier_ {0.0f}

float	current_multiplier_ {0.0f}

float	power_multiplier_ {0.0f}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Additional Inherited Members
Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Detailed Description

Definition at line 27 of file hlw8012.h.

Constructor & Destructor Documentation

◆ HLW8012Component()

esphome::hlw8012::HLW8012Component::HLW8012Component ( )

inline

Definition at line 29 of file hlw8012.h.

Member Function Documentation

◆ dump_config()

void esphome::hlw8012::HLW8012Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 36 of file hlw8012.cpp.

◆ get_setup_priority()

float esphome::hlw8012::HLW8012Component::get_setup_priority ( ) const

overridevirtual

Reimplemented from esphome::Component.

Definition at line 50 of file hlw8012.cpp.

◆ set_cf1_pin()

void esphome::hlw8012::HLW8012Component::set_cf1_pin ( InternalGPIOPin * cf1_pin )

inline

Definition at line 46 of file hlw8012.h.

◆ set_cf_pin()

void esphome::hlw8012::HLW8012Component::set_cf_pin ( InternalGPIOPin * cf_pin )

inline

Definition at line 45 of file hlw8012.h.

◆ set_change_mode_every()

void esphome::hlw8012::HLW8012Component::set_change_mode_every ( uint32_t change_mode_every )

inline

Definition at line 41 of file hlw8012.h.

◆ set_current_resistor()

void esphome::hlw8012::HLW8012Component::set_current_resistor ( float current_resistor )

inline

Definition at line 42 of file hlw8012.h.

◆ set_current_sensor()

void esphome::hlw8012::HLW8012Component::set_current_sensor ( sensor::Sensor * current_sensor )

inline

Definition at line 48 of file hlw8012.h.

◆ set_energy_sensor()

void esphome::hlw8012::HLW8012Component::set_energy_sensor ( sensor::Sensor * energy_sensor )

inline

Definition at line 50 of file hlw8012.h.

◆ set_initial_mode()

void esphome::hlw8012::HLW8012Component::set_initial_mode ( HLW8012InitialMode initial_mode )

inline

Definition at line 37 of file hlw8012.h.

◆ set_power_sensor()

void esphome::hlw8012::HLW8012Component::set_power_sensor ( sensor::Sensor * power_sensor )

inline

Definition at line 49 of file hlw8012.h.

◆ set_sel_pin()

void esphome::hlw8012::HLW8012Component::set_sel_pin ( GPIOPin * sel_pin )

inline

Definition at line 44 of file hlw8012.h.

◆ set_sensor_model()

void esphome::hlw8012::HLW8012Component::set_sensor_model ( HLW8012SensorModels sensor_model )

inline

Definition at line 40 of file hlw8012.h.

◆ set_voltage_divider()

void esphome::hlw8012::HLW8012Component::set_voltage_divider ( float voltage_divider )

inline

Definition at line 43 of file hlw8012.h.

◆ set_voltage_sensor()

void esphome::hlw8012::HLW8012Component::set_voltage_sensor ( sensor::Sensor * voltage_sensor )

inline

Definition at line 47 of file hlw8012.h.

◆ setup()

void esphome::hlw8012::HLW8012Component::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 12 of file hlw8012.cpp.

◆ update()

void esphome::hlw8012::HLW8012Component::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 51 of file hlw8012.cpp.

Field Documentation

◆ cf1_pin_

InternalGPIOPin* esphome::hlw8012::HLW8012Component::cf1_pin_

protected

Definition at line 64 of file hlw8012.h.

◆ cf1_store_

pulse_counter::PulseCounterStorageBase& esphome::hlw8012::HLW8012Component::cf1_store_

protected

Definition at line 65 of file hlw8012.h.

◆ cf_pin_

InternalGPIOPin* esphome::hlw8012::HLW8012Component::cf_pin_

protected

Definition at line 62 of file hlw8012.h.

◆ cf_store_

pulse_counter::PulseCounterStorageBase& esphome::hlw8012::HLW8012Component::cf_store_

protected

Definition at line 63 of file hlw8012.h.

◆ cf_total_pulses_

uint64_t esphome::hlw8012::HLW8012Component::cf_total_pulses_ {0}

protected

Definition at line 60 of file hlw8012.h.

◆ change_mode_at_

uint32_t esphome::hlw8012::HLW8012Component::change_mode_at_ {0}

protected

Definition at line 55 of file hlw8012.h.

◆ change_mode_every_

uint32_t esphome::hlw8012::HLW8012Component::change_mode_every_ {8}

protected

Definition at line 56 of file hlw8012.h.

◆ current_mode_

bool esphome::hlw8012::HLW8012Component::current_mode_ {false}

protected

Definition at line 54 of file hlw8012.h.

◆ current_multiplier_

float esphome::hlw8012::HLW8012Component::current_multiplier_ {0.0f}

protected

Definition at line 72 of file hlw8012.h.

◆ current_resistor_

float esphome::hlw8012::HLW8012Component::current_resistor_ {0.001}

protected

Definition at line 57 of file hlw8012.h.

◆ current_sensor_

sensor::Sensor* esphome::hlw8012::HLW8012Component::current_sensor_ {nullptr}

protected

Definition at line 67 of file hlw8012.h.

◆ energy_sensor_

sensor::Sensor* esphome::hlw8012::HLW8012Component::energy_sensor_ {nullptr}

protected

Definition at line 69 of file hlw8012.h.

◆ nth_value_

uint32_t esphome::hlw8012::HLW8012Component::nth_value_ {0}

protected

Definition at line 53 of file hlw8012.h.

◆ power_multiplier_

float esphome::hlw8012::HLW8012Component::power_multiplier_ {0.0f}

protected

Definition at line 73 of file hlw8012.h.

◆ power_sensor_

sensor::Sensor* esphome::hlw8012::HLW8012Component::power_sensor_ {nullptr}

protected

Definition at line 68 of file hlw8012.h.

◆ sel_pin_

GPIOPin* esphome::hlw8012::HLW8012Component::sel_pin_

protected

Definition at line 61 of file hlw8012.h.

◆ sensor_model_

HLW8012SensorModels esphome::hlw8012::HLW8012Component::sensor_model_ {HLW8012_SENSOR_MODEL_HLW8012}

protected

Definition at line 59 of file hlw8012.h.

◆ voltage_divider_

float esphome::hlw8012::HLW8012Component::voltage_divider_ {2351}

protected

Definition at line 58 of file hlw8012.h.

◆ voltage_multiplier_

float esphome::hlw8012::HLW8012Component::voltage_multiplier_ {0.0f}

protected

Definition at line 71 of file hlw8012.h.

◆ voltage_sensor_

sensor::Sensor* esphome::hlw8012::HLW8012Component::voltage_sensor_ {nullptr}

protected

Definition at line 66 of file hlw8012.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/hlw8012/hlw8012.h
/opt/build/esphome/esphome/components/hlw8012/hlw8012.cpp

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ HLW8012Component()

Member Function Documentation

◆ dump_config()

◆ get_setup_priority()

◆ set_cf1_pin()

◆ set_cf_pin()

◆ set_change_mode_every()

◆ set_current_resistor()

◆ set_current_sensor()

◆ set_energy_sensor()

◆ set_initial_mode()

◆ set_power_sensor()

◆ set_sel_pin()

◆ set_sensor_model()

◆ set_voltage_divider()

◆ set_voltage_sensor()

◆ setup()

◆ update()

Field Documentation

◆ cf1_pin_

◆ cf1_store_

◆ cf_pin_

◆ cf_store_

◆ cf_total_pulses_

◆ change_mode_at_

◆ change_mode_every_

◆ current_mode_

◆ current_multiplier_

◆ current_resistor_

◆ current_sensor_

◆ energy_sensor_

◆ nth_value_

◆ power_multiplier_

◆ power_sensor_

◆ sel_pin_

◆ sensor_model_

◆ voltage_divider_

◆ voltage_multiplier_

◆ voltage_sensor_