#include <bmp581.h>

Inheritance diagram for esphome::bmp581::BMP581Component:

Public Member Functions
float	get_setup_priority () const override

void	dump_config () override

void	setup () override

void	update () override

void	set_temperature_sensor (sensor::Sensor *temperature_sensor)

void	set_pressure_sensor (sensor::Sensor *pressure_sensor)

void	set_temperature_oversampling_config (Oversampling temperature_oversampling)

void	set_pressure_oversampling_config (Oversampling pressure_oversampling)

void	set_temperature_iir_filter_config (IIRFilter iir_temperature_level)

void	set_pressure_iir_filter_config (IIRFilter iir_pressure_level)

void	set_conversion_time (uint8_t conversion_time)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms. More...

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object. More...

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor. More...

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual void	loop ()
	This method will be called repeatedly. More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

void	mark_failed (const char *message)

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Public Member Functions inherited from esphome::i2c::I2CDevice
	I2CDevice ()=default
	we use the C++ default constructor More...

void	set_i2c_address (uint8_t address)
	We store the address of the device on the bus. More...

void	set_i2c_bus (I2CBus *bus)
	we store the pointer to the I2CBus to use More...

I2CRegister	reg (uint8_t a_register)
	calls the I2CRegister constructor More...

I2CRegister16	reg16 (uint16_t a_register)
	calls the I2CRegister16 constructor More...

ErrorCode	read (uint8_t *data, size_t len)
	reads an array of bytes from the device using an I2CBus More...

ErrorCode	read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device More...

ErrorCode	read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device More...

ErrorCode	write (const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a device using an I2CBus More...

ErrorCode	write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a specific register in the I²C device More...

ErrorCode	write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
	write an array of bytes to a specific register in the I²C device More...

bool	read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
	Compat APIs All methods below have been added for compatibility reasons. More...

bool	read_bytes_raw (uint8_t *data, uint8_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes (uint8_t a_register)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes_raw ()

bool	read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)

bool	read_byte (uint8_t a_register, uint8_t *data, bool stop=true)

optional< uint8_t >	read_byte (uint8_t a_register)

bool	read_byte_16 (uint8_t a_register, uint16_t *data)

bool	write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)

bool	write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)

template<size_t N>
bool	write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)

bool	write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)

bool	write_byte (uint8_t a_register, uint8_t data, bool stop=true)

bool	write_byte_16 (uint8_t a_register, uint16_t data)

Protected Types
enum	ErrorCode { NONE = 0, ERROR_COMMUNICATION_FAILED, ERROR_WRONG_CHIP_ID, ERROR_SENSOR_STATUS, ERROR_SENSOR_RESET, ERROR_PRIME_IIR_FAILED }

Protected Member Functions
bool	check_data_readiness_ ()

bool	prime_iir_filter_ ()

bool	read_temperature_ (float &temperature)

bool	read_temperature_and_pressure_ (float &temperature, float &pressure)

bool	reset_ ()

bool	start_measurement_ ()

bool	write_iir_settings_ (IIRFilter temperature_iir, IIRFilter pressure_iir)

bool	write_interrupt_source_settings_ (bool data_ready_enable)

bool	write_oversampling_settings_ (Oversampling temperature_oversampling, Oversampling pressure_oversampling)

bool	write_power_mode_ (OperationMode mode)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
sensor::Sensor *	temperature_sensor_ {nullptr}

sensor::Sensor *	pressure_sensor_ {nullptr}

Oversampling	temperature_oversampling_

Oversampling	pressure_oversampling_

IIRFilter	iir_temperature_level_

IIRFilter	iir_pressure_level_

uint8_t	conversion_time_

enum esphome::bmp581::BMP581Component::ErrorCode	NONE

union {
struct {
uint8_t drdy_data_reg_en: 1

uint8_t fifo_full_en: 1

uint8_t fifo_ths_en: 1

uint8_t oor_p_en: 1

} bit

uint8_t reg

}	int_source_ = {.reg = 0}

union {
struct {
uint8_t drdy_data_reg: 1

uint8_t fifo_full: 1

uint8_t fifo_ths: 1

uint8_t oor_p: 1

uint8_t por: 1

} bit

uint8_t reg

}	int_status_ = {.reg = 0}

union {
struct {
uint8_t status_core_rdy: 1

uint8_t status_nvm_rdy: 1

uint8_t status_nvm_err: 1

uint8_t status_nvm_cmd_err: 1

uint8_t status_boot_err_corrected: 1

uint8_t __pad0__: 2

uint8_t st_crack_pass: 1

} bit

uint8_t reg

}	status_ = {.reg = 0}

union {
struct {
uint8_t comp_pt_en: 2

uint8_t iir_flush_forced_en: 1

uint8_t shdw_sel_iir_t: 1

uint8_t fifo_sel_iir_t: 1

uint8_t shdw_sel_iir_p: 1

uint8_t fifo_sel_iir_p: 1

uint8_t oor_sel_iir_p: 1

} bit

uint8_t reg

}	dsp_config_ = {.reg = 0}

union {
struct {
uint8_t set_iir_t: 3

uint8_t set_iir_p: 3

} bit

uint8_t reg

}	iir_config_ = {.reg = 0}

union {
struct {
uint8_t osr_t: 3

uint8_t osr_p: 3

uint8_t press_en: 1

} bit

uint8_t reg

}	osr_config_ = {.reg = 0}

union {
struct {
uint8_t pwr_mode: 2

uint8_t odr: 5

uint8_t deep_dis: 1

} bit

uint8_t reg

}	odr_config_ = {.reg = 0}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

std::string	error_message_ {}

Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t	address_ {0x00}
	store the address of the device on the bus More...

I2CBus *	bus_ {nullptr}
	pointer to I2CBus instance More...

Detailed Description

Definition at line 62 of file bmp581.h.

Member Enumeration Documentation

◆ ErrorCode

enum esphome::bmp581::BMP581Component::ErrorCode

protected

Enumerator
NONE
ERROR_COMMUNICATION_FAILED
ERROR_WRONG_CHIP_ID
ERROR_SENSOR_STATUS
ERROR_SENSOR_RESET
ERROR_PRIME_IIR_FAILED

Definition at line 131 of file bmp581.h.

Member Function Documentation

◆ check_data_readiness_()

bool esphome::bmp581::BMP581Component::check_data_readiness_ ( )

protected

Definition at line 344 of file bmp581.cpp.

◆ dump_config()

void esphome::bmp581::BMP581Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 68 of file bmp581.cpp.

◆ get_setup_priority()

float esphome::bmp581::BMP581Component::get_setup_priority ( ) const

inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 64 of file bmp581.h.

◆ prime_iir_filter_()

bool esphome::bmp581::BMP581Component::prime_iir_filter_ ( )

protected

Definition at line 378 of file bmp581.cpp.

◆ read_temperature_()

bool esphome::bmp581::BMP581Component::read_temperature_ ( float & temperature )

protected

Definition at line 439 of file bmp581.cpp.

◆ read_temperature_and_pressure_()

bool esphome::bmp581::BMP581Component::read_temperature_and_pressure_	(	float &	temperature,
		float &	pressure
	)

protected

Definition at line 467 of file bmp581.cpp.

◆ reset_()

bool esphome::bmp581::BMP581Component::reset_ ( )

protected

Definition at line 500 of file bmp581.cpp.

◆ set_conversion_time()

void esphome::bmp581::BMP581Component::set_conversion_time ( uint8_t conversion_time )

inline

Definition at line 86 of file bmp581.h.

◆ set_pressure_iir_filter_config()

void esphome::bmp581::BMP581Component::set_pressure_iir_filter_config ( IIRFilter iir_pressure_level )

inline

Definition at line 84 of file bmp581.h.

◆ set_pressure_oversampling_config()

void esphome::bmp581::BMP581Component::set_pressure_oversampling_config ( Oversampling pressure_oversampling )

inline

Definition at line 77 of file bmp581.h.

◆ set_pressure_sensor()

void esphome::bmp581::BMP581Component::set_pressure_sensor ( sensor::Sensor * pressure_sensor )

inline

Definition at line 72 of file bmp581.h.

◆ set_temperature_iir_filter_config()

void esphome::bmp581::BMP581Component::set_temperature_iir_filter_config ( IIRFilter iir_temperature_level )

inline

Definition at line 81 of file bmp581.h.

◆ set_temperature_oversampling_config()

void esphome::bmp581::BMP581Component::set_temperature_oversampling_config ( Oversampling temperature_oversampling )

inline

Definition at line 74 of file bmp581.h.

◆ set_temperature_sensor()

void esphome::bmp581::BMP581Component::set_temperature_sensor ( sensor::Sensor * temperature_sensor )

inline

Definition at line 71 of file bmp581.h.

◆ setup()

void esphome::bmp581::BMP581Component::setup ( )

overridevirtual

6) Configure and prime IIR Filter(s), if enabled //

Reimplemented from esphome::Component.

Definition at line 112 of file bmp581.cpp.

◆ start_measurement_()

bool esphome::bmp581::BMP581Component::start_measurement_ ( )

protected

Definition at line 527 of file bmp581.cpp.

◆ update()

void esphome::bmp581::BMP581Component::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 267 of file bmp581.cpp.

◆ write_iir_settings_()

bool esphome::bmp581::BMP581Component::write_iir_settings_	(	IIRFilter	temperature_iir,
		IIRFilter	pressure_iir
	)

protected

Definition at line 538 of file bmp581.cpp.

◆ write_interrupt_source_settings_()

bool esphome::bmp581::BMP581Component::write_interrupt_source_settings_ ( bool data_ready_enable )

protected

Definition at line 564 of file bmp581.cpp.

◆ write_oversampling_settings_()

bool esphome::bmp581::BMP581Component::write_oversampling_settings_	(	Oversampling	temperature_oversampling,
		Oversampling	pressure_oversampling
	)

protected

Definition at line 574 of file bmp581.cpp.

◆ write_power_mode_()

bool esphome::bmp581::BMP581Component::write_power_mode_ ( OperationMode mode )

protected

Definition at line 585 of file bmp581.cpp.

Field Documentation