#include <atm90e32.h>

Inheritance diagram for esphome::atm90e32::ATM90E32Component:

Data Structures
struct	ATM90E32Phase

struct	Calibration

Public Member Functions
void	loop () override

void	setup () override

void	dump_config () override

float	get_setup_priority () const override

void	update () override

void	set_voltage_sensor (int phase, sensor::Sensor *obj)

void	set_current_sensor (int phase, sensor::Sensor *obj)

void	set_power_sensor (int phase, sensor::Sensor *obj)

void	set_reactive_power_sensor (int phase, sensor::Sensor *obj)

void	set_apparent_power_sensor (int phase, sensor::Sensor *obj)

void	set_forward_active_energy_sensor (int phase, sensor::Sensor *obj)

void	set_reverse_active_energy_sensor (int phase, sensor::Sensor *obj)

void	set_power_factor_sensor (int phase, sensor::Sensor *obj)

void	set_phase_angle_sensor (int phase, sensor::Sensor *obj)

void	set_harmonic_active_power_sensor (int phase, sensor::Sensor *obj)

void	set_peak_current_sensor (int phase, sensor::Sensor *obj)

void	set_volt_gain (int phase, uint16_t gain)

void	set_ct_gain (int phase, uint16_t gain)

void	set_freq_sensor (sensor::Sensor *freq_sensor)

void	set_peak_current_signed (bool flag)

void	set_chip_temperature_sensor (sensor::Sensor *chip_temperature_sensor)

void	set_line_freq (int freq)

void	set_current_phases (int phases)

void	set_pga_gain (uint16_t gain)

void	run_offset_calibrations ()

void	clear_offset_calibrations ()

void	set_enable_offset_calibration (bool flag)

uint16_t	calibrate_voltage_offset_phase (uint8_t)

uint16_t	calibrate_current_offset_phase (uint8_t)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms. More...

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object. More...

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor. More...

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Public Member Functions inherited from esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH, spi::CLOCK_PHASE_TRAILING, spi::DATA_RATE_1MHZ >
	SPIDevice ()

	SPIDevice (SPIComponent parent, GPIOPin cs_pin)

void	spi_setup () override

void	spi_teardown () override

void	set_spi_parent (SPIComponent *parent)

void	set_cs_pin (GPIOPin *cs)

void	set_data_rate (uint32_t data_rate)

void	set_bit_order (SPIBitOrder order)

void	set_mode (SPIMode mode)

uint8_t	read_byte ()

void	read_array (uint8_t *data, size_t length)

void	write (uint16_t data, size_t num_bits)
	Write a single data item, up to 32 bits. More...

void	write_cmd_addr_data (size_t cmd_bits, uint32_t cmd, size_t addr_bits, uint32_t address, const uint8_t *data, size_t length, uint8_t bus_width=1)

void	write_byte (uint8_t data)

void	transfer_array (uint8_t *data, size_t length)
	Write the array data, replace with received data. More...

void	transfer_array (std::array< uint8_t, N > &data)

uint8_t	transfer_byte (uint8_t data)

void	write_byte16 (uint16_t data)
	Write 16 bit data. More...

void	write_array16 (const uint16_t *data, size_t length)
	Write an array of data as 16 bit values, byte-swapping if required. More...

void	enable ()

void	disable ()

void	write_array (const uint8_t *data, size_t length)

void	write_array (const std::array< uint8_t, N > &data)

void	write_array (const std::vector< uint8_t > &data)

Public Member Functions inherited from esphome::spi::SPIClient
	SPIClient (SPIBitOrder bit_order, SPIMode mode, uint32_t data_rate)

bool	spi_is_ready ()

Data Fields
int32_t	last_periodic_millis = millis()

Static Public Attributes
static const uint8_t	PHASEA = 0

static const uint8_t	PHASEB = 1

static const uint8_t	PHASEC = 2

Protected Member Functions
uint16_t	read16_ (uint16_t a_register)

int	read32_ (uint16_t addr_h, uint16_t addr_l)

void	write16_ (uint16_t a_register, uint16_t val)

float	get_local_phase_voltage_ (uint8_t)

float	get_local_phase_current_ (uint8_t)

float	get_local_phase_active_power_ (uint8_t)

float	get_local_phase_reactive_power_ (uint8_t)

float	get_local_phase_power_factor_ (uint8_t)

float	get_local_phase_forward_active_energy_ (uint8_t)

float	get_local_phase_reverse_active_energy_ (uint8_t)

float	get_local_phase_angle_ (uint8_t)

float	get_local_phase_harmonic_active_power_ (uint8_t)

float	get_local_phase_peak_current_ (uint8_t)

float	get_phase_voltage_ (uint8_t)

float	get_phase_voltage_avg_ (uint8_t)

float	get_phase_current_ (uint8_t)

float	get_phase_current_avg_ (uint8_t)

float	get_phase_active_power_ (uint8_t)

float	get_phase_reactive_power_ (uint8_t)

float	get_phase_power_factor_ (uint8_t)

float	get_phase_forward_active_energy_ (uint8_t)

float	get_phase_reverse_active_energy_ (uint8_t)

float	get_phase_angle_ (uint8_t)

float	get_phase_harmonic_active_power_ (uint8_t)

float	get_phase_peak_current_ (uint8_t)

float	get_frequency_ ()

float	get_chip_temperature_ ()

bool	get_publish_interval_flag_ ()

void	set_publish_interval_flag_ (bool flag)

void	restore_calibrations_ ()

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
struct esphome::atm90e32::ATM90E32Component::ATM90E32Phase	phase_ [3]

struct esphome::atm90e32::ATM90E32Component::Calibration	offset_phase_ [3]

ESPPreferenceObject	pref_

sensor::Sensor *	freq_sensor_ {nullptr}

sensor::Sensor *	chip_temperature_sensor_ {nullptr}

uint16_t	pga_gain_ {0x15}

int	line_freq_ {60}

int	current_phases_ {3}

bool	publish_interval_flag_ {false}

bool	peak_current_signed_ {false}

bool	enable_offset_calibration_ {false}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Protected Attributes inherited from esphome::spi::SPIClient
SPIBitOrder	bit_order_ {BIT_ORDER_MSB_FIRST}

SPIMode	mode_ {MODE0}

uint32_t	data_rate_ {1000000}

SPIComponent *	parent_ {nullptr}

GPIOPin *	cs_ {nullptr}

SPIDelegate *	delegate_ {nullptr}

Detailed Description

Definition at line 14 of file atm90e32.h.

Member Function Documentation

◆ calibrate_current_offset_phase()

uint16_t esphome::atm90e32::ATM90E32Component::calibrate_current_offset_phase ( uint8_t phase )

Definition at line 483 of file atm90e32.cpp.

◆ calibrate_voltage_offset_phase()

uint16_t esphome::atm90e32::ATM90E32Component::calibrate_voltage_offset_phase ( uint8_t phase )

Definition at line 470 of file atm90e32.cpp.

◆ clear_offset_calibrations()

void esphome::atm90e32::ATM90E32Component::clear_offset_calibrations ( )

Definition at line 171 of file atm90e32.cpp.

◆ dump_config()

void esphome::atm90e32::ATM90E32Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 249 of file atm90e32.cpp.

◆ get_chip_temperature_()

float esphome::atm90e32::ATM90E32Component::get_chip_temperature_ ( )

protected

Definition at line 465 of file atm90e32.cpp.

◆ get_frequency_()

float esphome::atm90e32::ATM90E32Component::get_frequency_ ( )

protected

Definition at line 460 of file atm90e32.cpp.

◆ get_local_phase_active_power_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_active_power_ ( uint8_t phase )

protected

Definition at line 339 of file atm90e32.cpp.

◆ get_local_phase_angle_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_angle_ ( uint8_t phase )

protected

Definition at line 353 of file atm90e32.cpp.

◆ get_local_phase_current_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_current_ ( uint8_t phase )

protected

Definition at line 337 of file atm90e32.cpp.

◆ get_local_phase_forward_active_energy_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_forward_active_energy_ ( uint8_t phase )

protected

Definition at line 345 of file atm90e32.cpp.

◆ get_local_phase_harmonic_active_power_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_harmonic_active_power_ ( uint8_t phase )

protected

Definition at line 355 of file atm90e32.cpp.

◆ get_local_phase_peak_current_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_peak_current_ ( uint8_t phase )

protected

Definition at line 359 of file atm90e32.cpp.

◆ get_local_phase_power_factor_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_power_factor_ ( uint8_t phase )

protected

Definition at line 343 of file atm90e32.cpp.

◆ get_local_phase_reactive_power_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_reactive_power_ ( uint8_t phase )

protected

Definition at line 341 of file atm90e32.cpp.

◆ get_local_phase_reverse_active_energy_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_reverse_active_energy_ ( uint8_t phase )

protected

Definition at line 349 of file atm90e32.cpp.

◆ get_local_phase_voltage_()

float esphome::atm90e32::ATM90E32Component::get_local_phase_voltage_ ( uint8_t phase )

protected

Definition at line 335 of file atm90e32.cpp.

◆ get_phase_active_power_()

float esphome::atm90e32::ATM90E32Component::get_phase_active_power_ ( uint8_t phase )

protected

Definition at line 405 of file atm90e32.cpp.

◆ get_phase_angle_()

float esphome::atm90e32::ATM90E32Component::get_phase_angle_ ( uint8_t phase )

protected

Definition at line 447 of file atm90e32.cpp.

◆ get_phase_current_()

float esphome::atm90e32::ATM90E32Component::get_phase_current_ ( uint8_t phase )

protected

Definition at line 398 of file atm90e32.cpp.

◆ get_phase_current_avg_()

float esphome::atm90e32::ATM90E32Component::get_phase_current_avg_ ( uint8_t phase )

protected

Definition at line 383 of file atm90e32.cpp.

◆ get_phase_forward_active_energy_()

float esphome::atm90e32::ATM90E32Component::get_phase_forward_active_energy_ ( uint8_t phase )

protected

Definition at line 422 of file atm90e32.cpp.

◆ get_phase_harmonic_active_power_()

float esphome::atm90e32::ATM90E32Component::get_phase_harmonic_active_power_ ( uint8_t phase )

protected

Definition at line 442 of file atm90e32.cpp.

◆ get_phase_peak_current_()

float esphome::atm90e32::ATM90E32Component::get_phase_peak_current_ ( uint8_t phase )

protected

Definition at line 452 of file atm90e32.cpp.

◆ get_phase_power_factor_()

float esphome::atm90e32::ATM90E32Component::get_phase_power_factor_ ( uint8_t phase )

protected

Definition at line 415 of file atm90e32.cpp.

◆ get_phase_reactive_power_()

float esphome::atm90e32::ATM90E32Component::get_phase_reactive_power_ ( uint8_t phase )

protected

Definition at line 410 of file atm90e32.cpp.

◆ get_phase_reverse_active_energy_()

float esphome::atm90e32::ATM90E32Component::get_phase_reverse_active_energy_ ( uint8_t phase )

protected

Definition at line 432 of file atm90e32.cpp.

◆ get_phase_voltage_()

float esphome::atm90e32::ATM90E32Component::get_phase_voltage_ ( uint8_t phase )

protected

Definition at line 361 of file atm90e32.cpp.

◆ get_phase_voltage_avg_()

float esphome::atm90e32::ATM90E32Component::get_phase_voltage_avg_ ( uint8_t phase )

protected

Definition at line 368 of file atm90e32.cpp.

◆ get_publish_interval_flag_()

bool esphome::atm90e32::ATM90E32Component::get_publish_interval_flag_ ( )

inlineprotected

Definition at line 88 of file atm90e32.h.

◆ get_setup_priority()

float esphome::atm90e32::ATM90E32Component::get_setup_priority ( ) const

overridevirtual

Reimplemented from esphome::Component.

Definition at line 290 of file atm90e32.cpp.

◆ loop()

void esphome::atm90e32::ATM90E32Component::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 10 of file atm90e32.cpp.

◆ read16_()

uint16_t esphome::atm90e32::ATM90E32Component::read16_ ( uint16_t a_register )

protected

Definition at line 295 of file atm90e32.cpp.

◆ read32_()

int esphome::atm90e32::ATM90E32Component::read32_	(	uint16_t	addr_h,
		uint16_t	addr_l
	)

protected

Definition at line 312 of file atm90e32.cpp.

◆ restore_calibrations_()

void esphome::atm90e32::ATM90E32Component::restore_calibrations_ ( )

protected

Definition at line 135 of file atm90e32.cpp.

◆ run_offset_calibrations()

void esphome::atm90e32::ATM90E32Component::run_offset_calibrations ( )

Definition at line 141 of file atm90e32.cpp.

◆ set_apparent_power_sensor()

void esphome::atm90e32::ATM90E32Component::set_apparent_power_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 30 of file atm90e32.h.

◆ set_chip_temperature_sensor()

void esphome::atm90e32::ATM90E32Component::set_chip_temperature_sensor ( sensor::Sensor * chip_temperature_sensor )

inline

Definition at line 47 of file atm90e32.h.

◆ set_ct_gain()

void esphome::atm90e32::ATM90E32Component::set_ct_gain	(	int	phase,
		uint16_t	gain
	)

inline

Definition at line 44 of file atm90e32.h.

◆ set_current_phases()

void esphome::atm90e32::ATM90E32Component::set_current_phases ( int phases )

inline

Definition at line 51 of file atm90e32.h.

◆ set_current_sensor()

void esphome::atm90e32::ATM90E32Component::set_current_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 27 of file atm90e32.h.

◆ set_enable_offset_calibration()

void esphome::atm90e32::ATM90E32Component::set_enable_offset_calibration ( bool flag )

inline

Definition at line 55 of file atm90e32.h.

◆ set_forward_active_energy_sensor()

void esphome::atm90e32::ATM90E32Component::set_forward_active_energy_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 31 of file atm90e32.h.

◆ set_freq_sensor()

void esphome::atm90e32::ATM90E32Component::set_freq_sensor ( sensor::Sensor * freq_sensor )

inline

Definition at line 45 of file atm90e32.h.

◆ set_harmonic_active_power_sensor()

void esphome::atm90e32::ATM90E32Component::set_harmonic_active_power_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 39 of file atm90e32.h.

◆ set_line_freq()

void esphome::atm90e32::ATM90E32Component::set_line_freq ( int freq )

inline

Definition at line 50 of file atm90e32.h.

◆ set_peak_current_sensor()

void esphome::atm90e32::ATM90E32Component::set_peak_current_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 42 of file atm90e32.h.

◆ set_peak_current_signed()

void esphome::atm90e32::ATM90E32Component::set_peak_current_signed ( bool flag )

inline

Definition at line 46 of file atm90e32.h.

◆ set_pga_gain()

void esphome::atm90e32::ATM90E32Component::set_pga_gain ( uint16_t gain )

inline

Definition at line 52 of file atm90e32.h.

◆ set_phase_angle_sensor()

void esphome::atm90e32::ATM90E32Component::set_phase_angle_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 38 of file atm90e32.h.

◆ set_power_factor_sensor()

void esphome::atm90e32::ATM90E32Component::set_power_factor_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 37 of file atm90e32.h.

◆ set_power_sensor()

void esphome::atm90e32::ATM90E32Component::set_power_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 28 of file atm90e32.h.

◆ set_publish_interval_flag_()

void esphome::atm90e32::ATM90E32Component::set_publish_interval_flag_ ( bool flag )

inlineprotected

Definition at line 89 of file atm90e32.h.

◆ set_reactive_power_sensor()

void esphome::atm90e32::ATM90E32Component::set_reactive_power_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 29 of file atm90e32.h.

◆ set_reverse_active_energy_sensor()

void esphome::atm90e32::ATM90E32Component::set_reverse_active_energy_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 34 of file atm90e32.h.

◆ set_volt_gain()

void esphome::atm90e32::ATM90E32Component::set_volt_gain	(	int	phase,
		uint16_t	gain
	)

inline

Definition at line 43 of file atm90e32.h.

◆ set_voltage_sensor()

void esphome::atm90e32::ATM90E32Component::set_voltage_sensor	(	int	phase,
		sensor::Sensor *	obj
	)

inline

Definition at line 26 of file atm90e32.h.

◆ setup()

void esphome::atm90e32::ATM90E32Component::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 198 of file atm90e32.cpp.

◆ update()

void esphome::atm90e32::ATM90E32Component::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 126 of file atm90e32.cpp.

◆ write16_()

void esphome::atm90e32::ATM90E32Component::write16_	(	uint16_t	a_register,
		uint16_t	val
	)

protected

Definition at line 325 of file atm90e32.cpp.

Field Documentation

◆ chip_temperature_sensor_

sensor::Sensor* esphome::atm90e32::ATM90E32Component::chip_temperature_sensor_ {nullptr}

protected

Definition at line 130 of file atm90e32.h.

◆ current_phases_

int esphome::atm90e32::ATM90E32Component::current_phases_ {3}

protected

Definition at line 133 of file atm90e32.h.

◆ enable_offset_calibration_

bool esphome::atm90e32::ATM90E32Component::enable_offset_calibration_ {false}

protected

Definition at line 136 of file atm90e32.h.

◆ freq_sensor_

sensor::Sensor* esphome::atm90e32::ATM90E32Component::freq_sensor_ {nullptr}

protected

Definition at line 129 of file atm90e32.h.

◆ last_periodic_millis

int32_t esphome::atm90e32::ATM90E32Component::last_periodic_millis = millis()

Definition at line 58 of file atm90e32.h.

◆ line_freq_

int esphome::atm90e32::ATM90E32Component::line_freq_ {60}

protected

Definition at line 132 of file atm90e32.h.

◆ offset_phase_

struct esphome::atm90e32::ATM90E32Component::Calibration esphome::atm90e32::ATM90E32Component::offset_phase_[3]

protected

◆ peak_current_signed_

bool esphome::atm90e32::ATM90E32Component::peak_current_signed_ {false}

protected

Definition at line 135 of file atm90e32.h.

◆ pga_gain_

uint16_t esphome::atm90e32::ATM90E32Component::pga_gain_ {0x15}

protected

Definition at line 131 of file atm90e32.h.

◆ phase_

struct esphome::atm90e32::ATM90E32Component::ATM90E32Phase esphome::atm90e32::ATM90E32Component::phase_[3]

protected

◆ PHASEA

const uint8_t esphome::atm90e32::ATM90E32Component::PHASEA = 0

static

Definition at line 18 of file atm90e32.h.

◆ PHASEB

const uint8_t esphome::atm90e32::ATM90E32Component::PHASEB = 1

static

Definition at line 19 of file atm90e32.h.

◆ PHASEC

const uint8_t esphome::atm90e32::ATM90E32Component::PHASEC = 2

static

Definition at line 20 of file atm90e32.h.

◆ pref_

ESPPreferenceObject esphome::atm90e32::ATM90E32Component::pref_

protected

Definition at line 127 of file atm90e32.h.

◆ publish_interval_flag_

bool esphome::atm90e32::ATM90E32Component::publish_interval_flag_ {false}

protected

Definition at line 134 of file atm90e32.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/atm90e32/atm90e32.h
/opt/build/esphome/esphome/components/atm90e32/atm90e32.cpp

Data Structures

Public Member Functions

Data Fields

Static Public Attributes

Protected Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ calibrate_current_offset_phase()

◆ calibrate_voltage_offset_phase()

◆ clear_offset_calibrations()

◆ dump_config()

◆ get_chip_temperature_()

◆ get_frequency_()

◆ get_local_phase_active_power_()

◆ get_local_phase_angle_()

◆ get_local_phase_current_()

◆ get_local_phase_forward_active_energy_()

◆ get_local_phase_harmonic_active_power_()

◆ get_local_phase_peak_current_()

◆ get_local_phase_power_factor_()

◆ get_local_phase_reactive_power_()

◆ get_local_phase_reverse_active_energy_()

◆ get_local_phase_voltage_()

◆ get_phase_active_power_()

◆ get_phase_angle_()

◆ get_phase_current_()

◆ get_phase_current_avg_()

◆ get_phase_forward_active_energy_()

◆ get_phase_harmonic_active_power_()

◆ get_phase_peak_current_()

◆ get_phase_power_factor_()

◆ get_phase_reactive_power_()

◆ get_phase_reverse_active_energy_()

◆ get_phase_voltage_()

◆ get_phase_voltage_avg_()

◆ get_publish_interval_flag_()

◆ get_setup_priority()

◆ loop()

◆ read16_()

◆ read32_()

◆ restore_calibrations_()

◆ run_offset_calibrations()

◆ set_apparent_power_sensor()

◆ set_chip_temperature_sensor()

◆ set_ct_gain()

◆ set_current_phases()

◆ set_current_sensor()

◆ set_enable_offset_calibration()

◆ set_forward_active_energy_sensor()

◆ set_freq_sensor()

◆ set_harmonic_active_power_sensor()

◆ set_line_freq()

◆ set_peak_current_sensor()

◆ set_peak_current_signed()

◆ set_pga_gain()

◆ set_phase_angle_sensor()

◆ set_power_factor_sensor()

◆ set_power_sensor()

◆ set_publish_interval_flag_()

◆ set_reactive_power_sensor()

◆ set_reverse_active_energy_sensor()

◆ set_volt_gain()

◆ set_voltage_sensor()

◆ setup()

◆ update()

◆ write16_()

Field Documentation

◆ chip_temperature_sensor_

◆ current_phases_

◆ enable_offset_calibration_

◆ freq_sensor_

◆ last_periodic_millis

◆ line_freq_

◆ offset_phase_

◆ peak_current_signed_

◆ pga_gain_

◆ phase_

◆ PHASEA

◆ PHASEB