#include <airthings_wave_base.h>

Inheritance diagram for esphome::airthings_wave_base::AirthingsWaveBase:

Data Structures
struct	AccessControlPointResponse

Public Member Functions
	AirthingsWaveBase ()=default

void	update () override

void	gattc_event_handler (esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override

void	set_temperature (sensor::Sensor *temperature)

void	set_humidity (sensor::Sensor *humidity)

void	set_pressure (sensor::Sensor *pressure)

void	set_tvoc (sensor::Sensor *tvoc)

void	set_battery_voltage (sensor::Sensor *voltage)

void	set_battery_update_interval (uint32_t interval)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms. More...

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object. More...

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor. More...

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual void	setup ()
	Where the component's initialization should happen. More...

virtual void	loop ()
	This method will be called repeatedly. More...

virtual void	dump_config ()

virtual float	get_setup_priority () const
	priority of setup(). More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Public Member Functions inherited from esphome::ble_client::BLEClientNode
virtual void	gap_event_handler (esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)

virtual void	loop ()

void	set_address (uint64_t address)

BLEClient *	parent ()

void	set_ble_client_parent (BLEClient *parent)

Protected Member Functions
bool	is_valid_voc_value_ (uint16_t voc)

bool	request_read_values_ ()

virtual void	read_sensors (uint8_t *raw_value, uint16_t value_len)=0

void	response_pending_ ()

void	response_received_ ()

void	set_response_timeout_ ()

bool	request_battery_ ()

void	read_battery_ (uint8_t *raw_value, uint16_t value_len)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
sensor::Sensor *	temperature_sensor_ {nullptr}

sensor::Sensor *	humidity_sensor_ {nullptr}

sensor::Sensor *	pressure_sensor_ {nullptr}

sensor::Sensor *	tvoc_sensor_ {nullptr}

sensor::Sensor *	battery_voltage_ {nullptr}

uint16_t	handle_

espbt::ESPBTUUID	service_uuid_

espbt::ESPBTUUID	sensors_data_characteristic_uuid_

uint16_t	acp_handle_ {0}

uint16_t	cccd_handle_ {0}

espbt::ESPBTUUID	access_control_point_characteristic_uuid_

uint8_t	responses_pending_ {0}

bool	read_battery_next_update_ {false}

uint32_t	battery_update_interval_ {}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Protected Attributes inherited from esphome::ble_client::BLEClientNode
BLEClient *	parent_

uint64_t	address_

Additional Inherited Members
Data Fields inherited from esphome::ble_client::BLEClientNode
espbt::ESPBTClient *	client

espbt::ClientState	node_state

Detailed Description

Definition at line 25 of file airthings_wave_base.h.

Constructor & Destructor Documentation

◆ AirthingsWaveBase()

esphome::airthings_wave_base::AirthingsWaveBase::AirthingsWaveBase ( )

default

Member Function Documentation

◆ gattc_event_handler()

void esphome::airthings_wave_base::AirthingsWaveBase::gattc_event_handler	(	esp_gattc_cb_event_t	event,
		esp_gatt_if_t	gattc_if,
		esp_ble_gattc_cb_param_t *	param
	)

overridevirtual

Reimplemented from esphome::ble_client::BLEClientNode.

Definition at line 13 of file airthings_wave_base.cpp.

◆ is_valid_voc_value_()

bool esphome::airthings_wave_base::AirthingsWaveBase::is_valid_voc_value_ ( uint16_t voc )

protected

Definition at line 79 of file airthings_wave_base.cpp.

◆ read_battery_()

void esphome::airthings_wave_base::AirthingsWaveBase::read_battery_	(	uint8_t *	raw_value,
		uint16_t	value_len
	)

protected

Definition at line 164 of file airthings_wave_base.cpp.

◆ read_sensors()

virtual void esphome::airthings_wave_base::AirthingsWaveBase::read_sensors	(	uint8_t *	raw_value,
		uint16_t	value_len
	)

protectedpure virtual

Implemented in esphome::airthings_wave_plus::AirthingsWavePlus, and esphome::airthings_wave_mini::AirthingsWaveMini.

◆ request_battery_()

bool esphome::airthings_wave_base::AirthingsWaveBase::request_battery_ ( )

protected

Definition at line 114 of file airthings_wave_base.cpp.

◆ request_read_values_()

bool esphome::airthings_wave_base::AirthingsWaveBase::request_read_values_ ( )

protected

Definition at line 93 of file airthings_wave_base.cpp.

◆ response_pending_()

void esphome::airthings_wave_base::AirthingsWaveBase::response_pending_ ( )

protected

Definition at line 187 of file airthings_wave_base.cpp.

◆ response_received_()

void esphome::airthings_wave_base::AirthingsWaveBase::response_received_ ( )

protected

Definition at line 192 of file airthings_wave_base.cpp.

◆ set_battery_update_interval()

void esphome::airthings_wave_base::AirthingsWaveBase::set_battery_update_interval ( uint32_t interval )

inline

Definition at line 42 of file airthings_wave_base.h.

◆ set_battery_voltage()

void esphome::airthings_wave_base::AirthingsWaveBase::set_battery_voltage ( sensor::Sensor * voltage )

inline

Definition at line 38 of file airthings_wave_base.h.

◆ set_humidity()

void esphome::airthings_wave_base::AirthingsWaveBase::set_humidity ( sensor::Sensor * humidity )

inline

Definition at line 35 of file airthings_wave_base.h.

◆ set_pressure()

void esphome::airthings_wave_base::AirthingsWaveBase::set_pressure ( sensor::Sensor * pressure )

inline

Definition at line 36 of file airthings_wave_base.h.

◆ set_response_timeout_()

void esphome::airthings_wave_base::AirthingsWaveBase::set_response_timeout_ ( )

protected

Definition at line 201 of file airthings_wave_base.cpp.

◆ set_temperature()

void esphome::airthings_wave_base::AirthingsWaveBase::set_temperature ( sensor::Sensor * temperature )

inline

Definition at line 34 of file airthings_wave_base.h.

◆ set_tvoc()

void esphome::airthings_wave_base::AirthingsWaveBase::set_tvoc ( sensor::Sensor * tvoc )

inline

Definition at line 37 of file airthings_wave_base.h.

◆ update()

void esphome::airthings_wave_base::AirthingsWaveBase::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 81 of file airthings_wave_base.cpp.

Field Documentation

◆ access_control_point_characteristic_uuid_

espbt::ESPBTUUID esphome::airthings_wave_base::AirthingsWaveBase::access_control_point_characteristic_uuid_

protected

Definition at line 62 of file airthings_wave_base.h.

◆ acp_handle_

uint16_t esphome::airthings_wave_base::AirthingsWaveBase::acp_handle_ {0}

protected

Definition at line 60 of file airthings_wave_base.h.

◆ battery_update_interval_

uint32_t esphome::airthings_wave_base::AirthingsWaveBase::battery_update_interval_ {}

protected

Definition at line 74 of file airthings_wave_base.h.

◆ battery_voltage_

sensor::Sensor* esphome::airthings_wave_base::AirthingsWaveBase::battery_voltage_ {nullptr}

protected

Definition at line 54 of file airthings_wave_base.h.

◆ cccd_handle_

uint16_t esphome::airthings_wave_base::AirthingsWaveBase::cccd_handle_ {0}

protected

Definition at line 61 of file airthings_wave_base.h.

◆ handle_

uint16_t esphome::airthings_wave_base::AirthingsWaveBase::handle_

protected

Definition at line 56 of file airthings_wave_base.h.

◆ humidity_sensor_

sensor::Sensor* esphome::airthings_wave_base::AirthingsWaveBase::humidity_sensor_ {nullptr}

protected

Definition at line 51 of file airthings_wave_base.h.

◆ pressure_sensor_

sensor::Sensor* esphome::airthings_wave_base::AirthingsWaveBase::pressure_sensor_ {nullptr}

protected

Definition at line 52 of file airthings_wave_base.h.

◆ read_battery_next_update_

bool esphome::airthings_wave_base::AirthingsWaveBase::read_battery_next_update_ {false}

protected

Definition at line 71 of file airthings_wave_base.h.

◆ responses_pending_

uint8_t esphome::airthings_wave_base::AirthingsWaveBase::responses_pending_ {0}

protected

Definition at line 64 of file airthings_wave_base.h.

◆ sensors_data_characteristic_uuid_

espbt::ESPBTUUID esphome::airthings_wave_base::AirthingsWaveBase::sensors_data_characteristic_uuid_

protected

Definition at line 58 of file airthings_wave_base.h.

◆ service_uuid_

espbt::ESPBTUUID esphome::airthings_wave_base::AirthingsWaveBase::service_uuid_

protected

Definition at line 57 of file airthings_wave_base.h.

◆ temperature_sensor_

sensor::Sensor* esphome::airthings_wave_base::AirthingsWaveBase::temperature_sensor_ {nullptr}

protected

Definition at line 50 of file airthings_wave_base.h.

◆ tvoc_sensor_

sensor::Sensor* esphome::airthings_wave_base::AirthingsWaveBase::tvoc_sensor_ {nullptr}

protected

Definition at line 53 of file airthings_wave_base.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/airthings_wave_base/airthings_wave_base.h
/opt/build/esphome/esphome/components/airthings_wave_base/airthings_wave_base.cpp

Data Structures

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AirthingsWaveBase()

Member Function Documentation

◆ gattc_event_handler()

◆ is_valid_voc_value_()

◆ read_battery_()

◆ read_sensors()

◆ request_battery_()

◆ request_read_values_()

◆ response_pending_()

◆ response_received_()

◆ set_battery_update_interval()

◆ set_battery_voltage()

◆ set_humidity()

◆ set_pressure()

◆ set_response_timeout_()

◆ set_temperature()

◆ set_tvoc()

◆ update()

Field Documentation

◆ access_control_point_characteristic_uuid_

◆ acp_handle_

◆ battery_update_interval_

◆ battery_voltage_

◆ cccd_handle_

◆ handle_

◆ humidity_sensor_

◆ pressure_sensor_

◆ read_battery_next_update_

◆ responses_pending_

◆ sensors_data_characteristic_uuid_

◆ service_uuid_

◆ temperature_sensor_

◆ tvoc_sensor_