#include <ade7880.h>

Inheritance diagram for esphome::ade7880::ADE7880:

Public Member Functions
void	set_irq0_pin (InternalGPIOPin *pin)

void	set_irq1_pin (InternalGPIOPin *pin)

void	set_reset_pin (InternalGPIOPin *pin)

void	set_frequency (float frequency)

void	set_channel_n (NeutralChannel *channel)

void	set_channel_a (PowerChannel *channel)

void	set_channel_b (PowerChannel *channel)

void	set_channel_c (PowerChannel *channel)

void	setup () override

void	loop () override

void	update () override

void	dump_config () override

float	get_setup_priority () const override

Public Member Functions inherited from esphome::i2c::I2CDevice
	I2CDevice ()=default
	we use the C++ default constructor More...

void	set_i2c_address (uint8_t address)
	We store the address of the device on the bus. More...

void	set_i2c_bus (I2CBus *bus)
	we store the pointer to the I2CBus to use More...

I2CRegister	reg (uint8_t a_register)
	calls the I2CRegister constructor More...

I2CRegister16	reg16 (uint16_t a_register)
	calls the I2CRegister16 constructor More...

ErrorCode	read (uint8_t *data, size_t len)
	reads an array of bytes from the device using an I2CBus More...

ErrorCode	read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device More...

ErrorCode	read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
	reads an array of bytes from a specific register in the I²C device More...

ErrorCode	write (const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a device using an I2CBus More...

ErrorCode	write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
	writes an array of bytes to a specific register in the I²C device More...

ErrorCode	write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
	write an array of bytes to a specific register in the I²C device More...

bool	read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
	Compat APIs All methods below have been added for compatibility reasons. More...

bool	read_bytes_raw (uint8_t *data, uint8_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes (uint8_t a_register)

template<size_t N>
optional< std::array< uint8_t, N > >	read_bytes_raw ()

bool	read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)

bool	read_byte (uint8_t a_register, uint8_t *data, bool stop=true)

optional< uint8_t >	read_byte (uint8_t a_register)

bool	read_byte_16 (uint8_t a_register, uint16_t *data)

bool	write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)

bool	write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)

template<size_t N>
bool	write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)

bool	write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)

bool	write_byte (uint8_t a_register, uint8_t data, bool stop=true)

bool	write_byte_16 (uint8_t a_register, uint16_t data)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms. More...

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object. More...

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor. More...

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed ()

bool	is_ready ()

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Protected Member Functions
void	calibrate_s10zp_reading_ (uint16_t a_register, int16_t calibration)

void	calibrate_s24zpse_reading_ (uint16_t a_register, int32_t calibration)

void	init_device_ ()

template<typename F >
void	update_sensor_from_s24zp_register16_ (sensor::Sensor *sensor, uint16_t a_register, F &&f)

template<typename F >
void	update_sensor_from_s16_register16_ (sensor::Sensor *sensor, uint16_t a_register, F &&f)

template<typename F >
void	update_sensor_from_s32_register16_ (sensor::Sensor *sensor, uint16_t a_register, F &&f)

void	reset_device_ ()

uint8_t	read_u8_register16_ (uint16_t a_register)

int16_t	read_s16_register16_ (uint16_t a_register)

uint16_t	read_u16_register16_ (uint16_t a_register)

int32_t	read_s24zp_register16_ (uint16_t a_register)

int32_t	read_s32_register16_ (uint16_t a_register)

uint32_t	read_u32_register16_ (uint16_t a_register)

void	write_u8_register16_ (uint16_t a_register, uint8_t value)

void	write_s10zp_register16_ (uint16_t a_register, int16_t value)

void	write_u16_register16_ (uint16_t a_register, uint16_t value)

void	write_s24zpse_register16_ (uint16_t a_register, int32_t value)

void	write_s32_register16_ (uint16_t a_register, int32_t value)

void	write_u32_register16_ (uint16_t a_register, uint32_t value)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
ADE7880Store	store_ {}

InternalGPIOPin *	irq0_pin_ {nullptr}

InternalGPIOPin *	irq1_pin_ {nullptr}

InternalGPIOPin *	reset_pin_ {nullptr}

float	frequency_

NeutralChannel *	channel_n_ {nullptr}

PowerChannel *	channel_a_ {nullptr}

PowerChannel *	channel_b_ {nullptr}

PowerChannel *	channel_c_ {nullptr}

Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t	address_ {0x00}
	store the address of the device on the bus More...

I2CBus *	bus_ {nullptr}
	pointer to I2CBus instance More...

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Detailed Description

Definition at line 69 of file ade7880.h.

Member Function Documentation

◆ calibrate_s10zp_reading_()

void esphome::ade7880::ADE7880::calibrate_s10zp_reading_	(	uint16_t	a_register,
		int16_t	calibration
	)

protected

Definition at line 228 of file ade7880.cpp.

◆ calibrate_s24zpse_reading_()

void esphome::ade7880::ADE7880::calibrate_s24zpse_reading_	(	uint16_t	a_register,
		int32_t	calibration
	)

protected

Definition at line 236 of file ade7880.cpp.

◆ dump_config()

void esphome::ade7880::ADE7880::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 162 of file ade7880.cpp.

◆ get_setup_priority()

float esphome::ade7880::ADE7880::get_setup_priority ( ) const

inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 88 of file ade7880.h.

◆ init_device_()

void esphome::ade7880::ADE7880::init_device_ ( )

protected

Definition at line 244 of file ade7880.cpp.

◆ loop()

void esphome::ade7880::ADE7880::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 55 of file ade7880.cpp.

◆ read_s16_register16_()

int16_t esphome::ade7880::ADE7880::read_s16_register16_ ( uint16_t a_register )

protected

Definition at line 39 of file ade7880_i2c.cpp.

◆ read_s24zp_register16_()

int32_t esphome::ade7880::ADE7880::read_s24zp_register16_ ( uint16_t a_register )

protected

Definition at line 51 of file ade7880_i2c.cpp.

◆ read_s32_register16_()

int32_t esphome::ade7880::ADE7880::read_s32_register16_ ( uint16_t a_register )

protected

Definition at line 58 of file ade7880_i2c.cpp.

◆ read_u16_register16_()

uint16_t esphome::ade7880::ADE7880::read_u16_register16_ ( uint16_t a_register )

protected

Definition at line 45 of file ade7880_i2c.cpp.

◆ read_u32_register16_()

uint32_t esphome::ade7880::ADE7880::read_u32_register16_ ( uint16_t a_register )

protected

Definition at line 64 of file ade7880_i2c.cpp.

◆ read_u8_register16_()

uint8_t esphome::ade7880::ADE7880::read_u8_register16_ ( uint16_t a_register )

protected

Definition at line 33 of file ade7880_i2c.cpp.

◆ reset_device_()

void esphome::ade7880::ADE7880::reset_device_ ( )

protected

Definition at line 288 of file ade7880.cpp.

◆ set_channel_a()

void esphome::ade7880::ADE7880::set_channel_a ( PowerChannel * channel )

inline

Definition at line 76 of file ade7880.h.

◆ set_channel_b()

void esphome::ade7880::ADE7880::set_channel_b ( PowerChannel * channel )

inline

Definition at line 77 of file ade7880.h.

◆ set_channel_c()

void esphome::ade7880::ADE7880::set_channel_c ( PowerChannel * channel )

inline

Definition at line 78 of file ade7880.h.

◆ set_channel_n()

void esphome::ade7880::ADE7880::set_channel_n ( NeutralChannel * channel )

inline

Definition at line 75 of file ade7880.h.

◆ set_frequency()

void esphome::ade7880::ADE7880::set_frequency ( float frequency )

inline

Definition at line 74 of file ade7880.h.

◆ set_irq0_pin()

void esphome::ade7880::ADE7880::set_irq0_pin ( InternalGPIOPin * pin )

inline

Definition at line 71 of file ade7880.h.

◆ set_irq1_pin()

void esphome::ade7880::ADE7880::set_irq1_pin ( InternalGPIOPin * pin )

inline

Definition at line 72 of file ade7880.h.

◆ set_reset_pin()

void esphome::ade7880::ADE7880::set_reset_pin ( InternalGPIOPin * pin )

inline

Definition at line 73 of file ade7880.h.

◆ setup()

void esphome::ade7880::ADE7880::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 21 of file ade7880.cpp.

◆ update()

void esphome::ade7880::ADE7880::update ( )

overridevirtual

Implements esphome::PollingComponent.

Definition at line 99 of file ade7880.cpp.

◆ update_sensor_from_s16_register16_()

template<typename F >

void esphome::ade7880::ADE7880::update_sensor_from_s16_register16_	(	sensor::Sensor *	sensor,
		uint16_t	a_register,
		F &&	f
	)

protected

Definition at line 80 of file ade7880.cpp.

◆ update_sensor_from_s24zp_register16_()

template<typename F >

void esphome::ade7880::ADE7880::update_sensor_from_s24zp_register16_	(	sensor::Sensor *	sensor,
		uint16_t	a_register,
		F &&	f
	)

protected

Definition at line 70 of file ade7880.cpp.

◆ update_sensor_from_s32_register16_()

template<typename F >

void esphome::ade7880::ADE7880::update_sensor_from_s32_register16_	(	sensor::Sensor *	sensor,
		uint16_t	a_register,
		F &&	f
	)

protected

Definition at line 90 of file ade7880.cpp.

◆ write_s10zp_register16_()

void esphome::ade7880::ADE7880::write_s10zp_register16_	(	uint16_t	a_register,
		int16_t	value
	)

protected

Definition at line 74 of file ade7880_i2c.cpp.

◆ write_s24zpse_register16_()

void esphome::ade7880::ADE7880::write_s24zpse_register16_	(	uint16_t	a_register,
		int32_t	value
	)

protected

Definition at line 84 of file ade7880_i2c.cpp.

◆ write_s32_register16_()

void esphome::ade7880::ADE7880::write_s32_register16_	(	uint16_t	a_register,
		int32_t	value
	)

protected

Definition at line 90 of file ade7880_i2c.cpp.

◆ write_u16_register16_()

void esphome::ade7880::ADE7880::write_u16_register16_	(	uint16_t	a_register,
		uint16_t	value
	)

protected

Definition at line 79 of file ade7880_i2c.cpp.

◆ write_u32_register16_()

void esphome::ade7880::ADE7880::write_u32_register16_	(	uint16_t	a_register,
		uint32_t	value
	)

protected

Definition at line 95 of file ade7880_i2c.cpp.

◆ write_u8_register16_()

void esphome::ade7880::ADE7880::write_u8_register16_	(	uint16_t	a_register,
		uint8_t	value
	)

protected

Definition at line 70 of file ade7880_i2c.cpp.

Field Documentation

◆ channel_a_

PowerChannel* esphome::ade7880::ADE7880::channel_a_ {nullptr}

protected

Definition at line 97 of file ade7880.h.

◆ channel_b_

PowerChannel* esphome::ade7880::ADE7880::channel_b_ {nullptr}

protected

Definition at line 98 of file ade7880.h.

◆ channel_c_

PowerChannel* esphome::ade7880::ADE7880::channel_c_ {nullptr}

protected

Definition at line 99 of file ade7880.h.

◆ channel_n_

NeutralChannel* esphome::ade7880::ADE7880::channel_n_ {nullptr}

protected

Definition at line 96 of file ade7880.h.

◆ frequency_

float esphome::ade7880::ADE7880::frequency_

protected

Definition at line 95 of file ade7880.h.

◆ irq0_pin_

InternalGPIOPin* esphome::ade7880::ADE7880::irq0_pin_ {nullptr}

protected

Definition at line 92 of file ade7880.h.

◆ irq1_pin_

InternalGPIOPin* esphome::ade7880::ADE7880::irq1_pin_ {nullptr}

protected

Definition at line 93 of file ade7880.h.

◆ reset_pin_

InternalGPIOPin* esphome::ade7880::ADE7880::reset_pin_ {nullptr}

protected

Definition at line 94 of file ade7880.h.

◆ store_

ADE7880Store esphome::ade7880::ADE7880::store_ {}

protected

Definition at line 91 of file ade7880.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/ade7880/ade7880.h
/opt/build/esphome/esphome/components/ade7880/ade7880.cpp
/opt/build/esphome/esphome/components/ade7880/ade7880_i2c.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ calibrate_s10zp_reading_()

◆ calibrate_s24zpse_reading_()

◆ dump_config()

◆ get_setup_priority()

◆ init_device_()

◆ loop()

◆ read_s16_register16_()

◆ read_s24zp_register16_()

◆ read_s32_register16_()

◆ read_u16_register16_()

◆ read_u32_register16_()

◆ read_u8_register16_()

◆ reset_device_()

◆ set_channel_a()

◆ set_channel_b()

◆ set_channel_c()

◆ set_channel_n()

◆ set_frequency()

◆ set_irq0_pin()

◆ set_irq1_pin()

◆ set_reset_pin()

◆ setup()

◆ update()

◆ update_sensor_from_s16_register16_()

◆ update_sensor_from_s24zp_register16_()

◆ update_sensor_from_s32_register16_()

◆ write_s10zp_register16_()

◆ write_s24zpse_register16_()

◆ write_s32_register16_()

◆ write_u16_register16_()

◆ write_u32_register16_()

◆ write_u8_register16_()

Field Documentation

◆ channel_a_

◆ channel_b_

◆ channel_c_

◆ channel_n_

◆ frequency_

◆ irq0_pin_

◆ irq1_pin_

◆ reset_pin_

◆ store_