Sonoff T1/T2/T3 UK¶
Please make sure you have read up about the Sonoff T1 / T2 / T3 and how to flash it with ESPHome.
So let’s get straight on with the code!
T1¶
esphome:
name: my_t1
esp8266:
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
logger:
api:
ota:
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
then:
- light.toggle: light_1
- platform: status
name: "T1 Status"
output:
- platform: gpio
pin: GPIO12
id: relay_1
light:
- platform: binary
name: "T1"
id: light_1
output: relay_1
status_led:
pin:
number: GPIO13
inverted: yes
In the above code block, there is a secrets.yaml file so that you have just one place to change WiFi details for all your devices.
The use_address is required because the Sonoff T series don’t work with mDNS properly. This means that it will show as off line in the dashboard, and you will need to use the IP address to view the logs or upload new versions of the firmware. You will also need to manually add the device in integrations by IP address. You will need to assign a fixed IP in the above configuration, or use a fixed IP assigned by your DHCP server.
See issue #810 for further details.
T2¶
esphome:
name: my_t2
esp8266:
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
logger:
api:
ota:
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
then:
- light.toggle: light_1
- platform: gpio
pin:
number: GPIO9
mode:
input: true
pullup: true
inverted: true
id: button_2
on_press:
then:
- light.toggle: light_2
- platform: status
name: "T2 Status"
output:
- platform: gpio
pin: GPIO12
id: relay_1
- platform: gpio
pin: GPIO5
id: relay_2
light:
- platform: binary
name: "T2 L1"
id: light_1
output: relay_1
- platform: binary
name: "T2 L2"
id: light_2
output: relay_2
status_led:
pin:
number: GPIO13
inverted: yes
T3¶
esphome:
name: my_t3
esp8266:
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
logger:
api:
ota:
binary_sensor:
- platform: gpio
pin:
number: GPIO0
mode:
input: true
pullup: true
inverted: true
id: button_1
on_press:
then:
- light.toggle: light_1
- platform: gpio
pin:
number: GPIO9
mode:
input: true
pullup: true
inverted: true
id: button_2
on_press:
then:
- light.toggle: light_2
- platform: gpio
pin:
number: GPIO10
mode:
input: true
pullup: true
inverted: true
id: button_3
on_press:
then:
- light.toggle: light_3
- platform: status
name: "T3 Status"
output:
- platform: gpio
pin: GPIO12
id: relay_1
- platform: gpio
pin: GPIO5
id: relay_2
- platform: gpio
pin: GPIO4
id: relay_3
light:
- platform: binary
name: "T3 L1"
id: light_1
output: relay_1
- platform: binary
name: "T3 L2"
id: light_2
output: relay_2
- platform: binary
name: "T3 L3"
id: light_3
output: relay_3
status_led:
pin:
number: GPIO13
inverted: yes