ESPHome  2024.10.0
Public Member Functions | Protected Member Functions | Protected Attributes
esphome::tmp1075::TMP1075Sensor Class Reference

#include <tmp1075.h>

Inheritance diagram for esphome::tmp1075::TMP1075Sensor:
esphome::PollingComponent esphome::sensor::Sensor esphome::i2c::I2CDevice esphome::Component esphome::EntityBase esphome::EntityBase_DeviceClass esphome::EntityBase_UnitOfMeasurement

Public Member Functions

void setup () override
 
void update () override
 
float get_setup_priority () const override
 
void dump_config () override
 
void set_alert_limit_low (const float temp)
 
void set_alert_limit_high (const float temp)
 
void set_oneshot (const bool oneshot)
 
void set_conversion_rate (const enum EConversionRate rate)
 
void set_alert_polarity (const bool polarity)
 
void set_alert_function (const enum EAlertFunction function)
 
void set_fault_count (int faults)
 
void write_config ()
 
- Public Member Functions inherited from esphome::PollingComponent
 PollingComponent ()
 
 PollingComponent (uint32_t update_interval)
 Initialize this polling component with the given update interval in ms. More...
 
virtual void set_update_interval (uint32_t update_interval)
 Manually set the update interval in ms for this polling object. More...
 
void call_setup () override
 
virtual uint32_t get_update_interval () const
 Get the update interval in ms of this sensor. More...
 
void start_poller ()
 
void stop_poller ()
 
- Public Member Functions inherited from esphome::Component
virtual void loop ()
 This method will be called repeatedly. More...
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed () const
 
bool is_ready () const
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::sensor::Sensor
 Sensor ()
 
int8_t get_accuracy_decimals ()
 Get the accuracy in decimals, using the manual override if set. More...
 
void set_accuracy_decimals (int8_t accuracy_decimals)
 Manually set the accuracy in decimals. More...
 
StateClass get_state_class ()
 Get the state class, using the manual override if set. More...
 
void set_state_class (StateClass state_class)
 Manually set the state class. More...
 
bool get_force_update () const
 Get whether force update mode is enabled. More...
 
void set_force_update (bool force_update)
 Set force update mode. More...
 
void add_filter (Filter *filter)
 Add a filter to the filter chain. Will be appended to the back. More...
 
void add_filters (const std::vector< Filter *> &filters)
 Add a list of vectors to the back of the filter chain. More...
 
void set_filters (const std::vector< Filter *> &filters)
 Clear the filters and replace them by filters. More...
 
void clear_filters ()
 Clear the entire filter chain. More...
 
float get_state () const
 Getter-syntax for .state. More...
 
float get_raw_state () const
 Getter-syntax for .raw_state. More...
 
void publish_state (float state)
 Publish a new state to the front-end. More...
 
void add_on_state_callback (std::function< void(float)> &&callback)
 Add a callback that will be called every time a filtered value arrives. More...
 
void add_on_raw_state_callback (std::function< void(float)> &&callback)
 Add a callback that will be called every time the sensor sends a raw value. More...
 
bool has_state () const
 Return whether this sensor has gotten a full state (that passed through all filters) yet. More...
 
virtual std::string unique_id ()
 Override this method to set the unique ID of this sensor. More...
 
void internal_send_state_to_frontend (float state)
 
- Public Member Functions inherited from esphome::EntityBase
const StringRefget_name () const
 
void set_name (const char *name)
 
bool has_own_name () const
 
std::string get_object_id () const
 
void set_object_id (const char *object_id)
 
uint32_t get_object_id_hash ()
 
bool is_internal () const
 
void set_internal (bool internal)
 
bool is_disabled_by_default () const
 
void set_disabled_by_default (bool disabled_by_default)
 
EntityCategory get_entity_category () const
 
void set_entity_category (EntityCategory entity_category)
 
std::string get_icon () const
 
void set_icon (const char *icon)
 
- Public Member Functions inherited from esphome::EntityBase_DeviceClass
std::string get_device_class ()
 Get the device class, using the manual override if set. More...
 
void set_device_class (const char *device_class)
 Manually set the device class. More...
 
- Public Member Functions inherited from esphome::EntityBase_UnitOfMeasurement
std::string get_unit_of_measurement ()
 Get the unit of measurement, using the manual override if set. More...
 
void set_unit_of_measurement (const char *unit_of_measurement)
 Manually set the unit of measurement. More...
 
- Public Member Functions inherited from esphome::i2c::I2CDevice
 I2CDevice ()=default
 we use the C++ default constructor More...
 
void set_i2c_address (uint8_t address)
 We store the address of the device on the bus. More...
 
void set_i2c_bus (I2CBus *bus)
 we store the pointer to the I2CBus to use More...
 
I2CRegister reg (uint8_t a_register)
 calls the I2CRegister constructor More...
 
I2CRegister16 reg16 (uint16_t a_register)
 calls the I2CRegister16 constructor More...
 
ErrorCode read (uint8_t *data, size_t len)
 reads an array of bytes from the device using an I2CBus More...
 
ErrorCode read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode write (const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a device using an I2CBus More...
 
ErrorCode write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a specific register in the I²C device More...
 
ErrorCode write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
 write an array of bytes to a specific register in the I²C device More...
 
bool read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
 Compat APIs All methods below have been added for compatibility reasons. More...
 
bool read_bytes_raw (uint8_t *data, uint8_t len)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes (uint8_t a_register)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes_raw ()
 
bool read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)
 
bool read_byte (uint8_t a_register, uint8_t *data, bool stop=true)
 
optional< uint8_t > read_byte (uint8_t a_register)
 
bool read_byte_16 (uint8_t a_register, uint16_t *data)
 
bool write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)
 
bool write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)
 
template<size_t N>
bool write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)
 
bool write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)
 
bool write_byte (uint8_t a_register, uint8_t data, bool stop=true)
 
bool write_byte_16 (uint8_t a_register, uint16_t data)
 

Protected Member Functions

void send_alert_limit_low_ ()
 
void send_alert_limit_high_ ()
 
void send_config_ ()
 
void log_config_ ()
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 
- Protected Member Functions inherited from esphome::EntityBase
virtual uint32_t hash_base ()
 The hash_base() function has been deprecated. More...
 
void calc_object_id_ ()
 

Protected Attributes

TMP1075Config config_ = {}
 
float alert_limit_low_ = -128.0f
 
float alert_limit_high_ = 127.9375f
 
- Protected Attributes inherited from esphome::PollingComponent
uint32_t update_interval_
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::sensor::Sensor
CallbackManager< void(float)> raw_callback_
 Storage for raw state callbacks. More...
 
CallbackManager< void(float)> callback_
 Storage for filtered state callbacks. More...
 
Filterfilter_list_ {nullptr}
 Store all active filters. More...
 
optional< int8_t > accuracy_decimals_
 Accuracy in decimals override. More...
 
optional< StateClassstate_class_ {STATE_CLASS_NONE}
 State class override. More...
 
bool force_update_ {false}
 Force update mode. More...
 
bool has_state_ {false}
 
- Protected Attributes inherited from esphome::EntityBase
StringRef name_
 
const char * object_id_c_str_ {nullptr}
 
const char * icon_c_str_ {nullptr}
 
uint32_t object_id_hash_
 
bool has_own_name_ {false}
 
bool internal_ {false}
 
bool disabled_by_default_ {false}
 
EntityCategory entity_category_ {ENTITY_CATEGORY_NONE}
 
- Protected Attributes inherited from esphome::EntityBase_DeviceClass
const char * device_class_ {nullptr}
 Device class override. More...
 
- Protected Attributes inherited from esphome::EntityBase_UnitOfMeasurement
const char * unit_of_measurement_ {nullptr}
 Unit of measurement override. More...
 
- Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t address_ {0x00}
 store the address of the device on the bus More...
 
I2CBusbus_ {nullptr}
 pointer to I2CBus instance More...
 

Additional Inherited Members

- Data Fields inherited from esphome::sensor::Sensor
float state
 This member variable stores the last state that has passed through all filters. More...
 
float raw_state
 This member variable stores the current raw state of the sensor, without any filters applied. More...
 

Detailed Description

Definition at line 57 of file tmp1075.h.

Member Function Documentation

◆ dump_config()

void esphome::tmp1075::TMP1075Sensor::dump_config ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 48 of file tmp1075.cpp.

◆ get_setup_priority()

float esphome::tmp1075::TMP1075Sensor::get_setup_priority ( ) const
inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 62 of file tmp1075.h.

◆ log_config_()

void esphome::tmp1075::TMP1075Sensor::log_config_ ( )
protected

Definition at line 76 of file tmp1075.cpp.

◆ send_alert_limit_high_()

void esphome::tmp1075::TMP1075Sensor::send_alert_limit_high_ ( )
protected

Definition at line 109 of file tmp1075.cpp.

◆ send_alert_limit_low_()

void esphome::tmp1075::TMP1075Sensor::send_alert_limit_low_ ( )
protected

Definition at line 100 of file tmp1075.cpp.

◆ send_config_()

void esphome::tmp1075::TMP1075Sensor::send_config_ ( )
protected

Definition at line 91 of file tmp1075.cpp.

◆ set_alert_function()

void esphome::tmp1075::TMP1075Sensor::set_alert_function ( const enum EAlertFunction  function)
inline

Definition at line 73 of file tmp1075.h.

◆ set_alert_limit_high()

void esphome::tmp1075::TMP1075Sensor::set_alert_limit_high ( const float  temp)
inline

Definition at line 69 of file tmp1075.h.

◆ set_alert_limit_low()

void esphome::tmp1075::TMP1075Sensor::set_alert_limit_low ( const float  temp)
inline

Definition at line 68 of file tmp1075.h.

◆ set_alert_polarity()

void esphome::tmp1075::TMP1075Sensor::set_alert_polarity ( const bool  polarity)
inline

Definition at line 72 of file tmp1075.h.

◆ set_conversion_rate()

void esphome::tmp1075::TMP1075Sensor::set_conversion_rate ( const enum EConversionRate  rate)
inline

Definition at line 71 of file tmp1075.h.

◆ set_fault_count()

void esphome::tmp1075::TMP1075Sensor::set_fault_count ( int  faults)

Definition at line 64 of file tmp1075.cpp.

◆ set_oneshot()

void esphome::tmp1075::TMP1075Sensor::set_oneshot ( const bool  oneshot)
inline

Definition at line 70 of file tmp1075.h.

◆ setup()

void esphome::tmp1075::TMP1075Sensor::setup ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 20 of file tmp1075.cpp.

◆ update()

void esphome::tmp1075::TMP1075Sensor::update ( )
overridevirtual

Implements esphome::PollingComponent.

Definition at line 36 of file tmp1075.cpp.

◆ write_config()

void esphome::tmp1075::TMP1075Sensor::write_config ( )

Definition at line 85 of file tmp1075.cpp.

Field Documentation

◆ alert_limit_high_

float esphome::tmp1075::TMP1075Sensor::alert_limit_high_ = 127.9375f
protected

Definition at line 83 of file tmp1075.h.

◆ alert_limit_low_

float esphome::tmp1075::TMP1075Sensor::alert_limit_low_ = -128.0f
protected

Definition at line 82 of file tmp1075.h.

◆ config_

TMP1075Config esphome::tmp1075::TMP1075Sensor::config_ = {}
protected

Definition at line 79 of file tmp1075.h.


The documentation for this class was generated from the following files: