ESPHome  2024.11.2
Protected Types | Protected Member Functions | Protected Attributes | Static Protected Attributes
esphome::pipsolar::Pipsolar Class Reference

#include <pipsolar.h>

Inheritance diagram for esphome::pipsolar::Pipsolar:
esphome::uart::UARTDevice esphome::PollingComponent esphome::Component

Protected Types

enum  State {
  STATE_IDLE = 0, STATE_POLL = 1, STATE_COMMAND = 2, STATE_POLL_COMPLETE = 3,
  STATE_COMMAND_COMPLETE = 4, STATE_POLL_CHECKED = 5, STATE_POLL_DECODED = 6
}
 

Protected Member Functions

void add_polling_command_ (const char *command, ENUMPollingCommand polling_command)
 
void empty_uart_buffer_ ()
 
uint8_t check_incoming_crc_ ()
 
uint8_t check_incoming_length_ (uint8_t length)
 
uint16_t pipsolar_crc_ (uint8_t *msg, uint8_t len)
 
uint8_t send_next_command_ ()
 
void send_next_poll_ ()
 
void queue_command_ (const char *command, uint8_t length)
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 

Protected Attributes

uint32_t last_poll_ = 0
 
std::string command_queue_ [COMMAND_QUEUE_LENGTH]
 
uint8_t command_queue_position_ = 0
 
uint8_t read_buffer_ [PIPSOLAR_READ_BUFFER_LENGTH]
 
size_t read_pos_ {0}
 
uint32_t command_start_millis_ = 0
 
uint8_t state_
 
uint8_t last_polling_command_ = 0
 
PollingCommand used_polling_commands_ [15]
 
- Protected Attributes inherited from esphome::uart::UARTDevice
UARTComponentparent_ {nullptr}
 
- Protected Attributes inherited from esphome::PollingComponent
uint32_t update_interval_
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 

Static Protected Attributes

static const size_t PIPSOLAR_READ_BUFFER_LENGTH = 110
 
static const size_t COMMAND_QUEUE_LENGTH = 10
 
static const size_t COMMAND_TIMEOUT = 5000
 

Additional Inherited Members

- Public Member Functions inherited from esphome::uart::UARTDevice
 UARTDevice ()=default
 
 UARTDevice (UARTComponent *parent)
 
void set_uart_parent (UARTComponent *parent)
 
void write_byte (uint8_t data)
 
void write_array (const uint8_t *data, size_t len)
 
void write_array (const std::vector< uint8_t > &data)
 
template<size_t N>
void write_array (const std::array< uint8_t, N > &data)
 
void write_str (const char *str)
 
bool read_byte (uint8_t *data)
 
bool peek_byte (uint8_t *data)
 
bool read_array (uint8_t *data, size_t len)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_array ()
 
int available ()
 
void flush ()
 
int read ()
 
size_t write (uint8_t data)
 
int peek ()
 
void check_uart_settings (uint32_t baud_rate, uint8_t stop_bits=1, UARTParityOptions parity=UART_CONFIG_PARITY_NONE, uint8_t data_bits=8)
 Check that the configuration of the UART bus matches the provided values and otherwise print a warning. More...
 
- Public Member Functions inherited from esphome::PollingComponent
 PollingComponent ()
 
 PollingComponent (uint32_t update_interval)
 Initialize this polling component with the given update interval in ms. More...
 
virtual void set_update_interval (uint32_t update_interval)
 Manually set the update interval in ms for this polling object. More...
 
void call_setup () override
 
virtual uint32_t get_update_interval () const
 Get the update interval in ms of this sensor. More...
 
void start_poller ()
 
void stop_poller ()
 
- Public Member Functions inherited from esphome::Component
virtual void setup ()
 Where the component's initialization should happen. More...
 
virtual float get_setup_priority () const
 priority of setup(). More...
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed () const
 
bool is_ready () const
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 

Detailed Description

Definition at line 54 of file pipsolar.h.

Member Enumeration Documentation

◆ State

Enumerator
STATE_IDLE 
STATE_POLL 
STATE_COMMAND 
STATE_POLL_COMPLETE 
STATE_COMMAND_COMPLETE 
STATE_POLL_CHECKED 
STATE_POLL_DECODED 

Definition at line 208 of file pipsolar.h.

Member Function Documentation

◆ add_polling_command_()

void esphome::pipsolar::Pipsolar::add_polling_command_ ( const char *  command,
ENUMPollingCommand  polling_command 
)
protected

Definition at line 874 of file pipsolar.cpp.

◆ check_incoming_crc_()

uint8_t esphome::pipsolar::Pipsolar::check_incoming_crc_ ( )
protected

Definition at line 773 of file pipsolar.cpp.

◆ check_incoming_length_()

uint8_t esphome::pipsolar::Pipsolar::check_incoming_length_ ( uint8_t  length)
protected

Definition at line 766 of file pipsolar.cpp.

◆ empty_uart_buffer_()

void esphome::pipsolar::Pipsolar::empty_uart_buffer_ ( )
protected

Definition at line 15 of file pipsolar.cpp.

◆ pipsolar_crc_()

uint16_t esphome::pipsolar::Pipsolar::pipsolar_crc_ ( uint8_t *  msg,
uint8_t  len 
)
protected

Definition at line 899 of file pipsolar.cpp.

◆ queue_command_()

void esphome::pipsolar::Pipsolar::queue_command_ ( const char *  command,
uint8_t  length 
)
protected

Definition at line 845 of file pipsolar.cpp.

◆ send_next_command_()

uint8_t esphome::pipsolar::Pipsolar::send_next_command_ ( )
protected

Definition at line 791 of file pipsolar.cpp.

◆ send_next_poll_()

void esphome::pipsolar::Pipsolar::send_next_poll_ ( )
protected

Definition at line 817 of file pipsolar.cpp.

Field Documentation

◆ command_queue_

std::string esphome::pipsolar::Pipsolar::command_queue_[COMMAND_QUEUE_LENGTH]
protected

Definition at line 201 of file pipsolar.h.

◆ COMMAND_QUEUE_LENGTH

const size_t esphome::pipsolar::Pipsolar::COMMAND_QUEUE_LENGTH = 10
staticprotected

Definition at line 190 of file pipsolar.h.

◆ command_queue_position_

uint8_t esphome::pipsolar::Pipsolar::command_queue_position_ = 0
protected

Definition at line 202 of file pipsolar.h.

◆ command_start_millis_

uint32_t esphome::pipsolar::Pipsolar::command_start_millis_ = 0
protected

Definition at line 206 of file pipsolar.h.

◆ COMMAND_TIMEOUT

const size_t esphome::pipsolar::Pipsolar::COMMAND_TIMEOUT = 5000
staticprotected

Definition at line 191 of file pipsolar.h.

◆ last_poll_

uint32_t esphome::pipsolar::Pipsolar::last_poll_ = 0
protected

Definition at line 192 of file pipsolar.h.

◆ last_polling_command_

uint8_t esphome::pipsolar::Pipsolar::last_polling_command_ = 0
protected

Definition at line 218 of file pipsolar.h.

◆ PIPSOLAR_READ_BUFFER_LENGTH

const size_t esphome::pipsolar::Pipsolar::PIPSOLAR_READ_BUFFER_LENGTH = 110
staticprotected

Definition at line 189 of file pipsolar.h.

◆ read_buffer_

uint8_t esphome::pipsolar::Pipsolar::read_buffer_[PIPSOLAR_READ_BUFFER_LENGTH]
protected

Definition at line 203 of file pipsolar.h.

◆ read_pos_

size_t esphome::pipsolar::Pipsolar::read_pos_ {0}
protected

Definition at line 204 of file pipsolar.h.

◆ state_

uint8_t esphome::pipsolar::Pipsolar::state_
protected

Definition at line 207 of file pipsolar.h.

◆ used_polling_commands_

PollingCommand esphome::pipsolar::Pipsolar::used_polling_commands_[15]
protected

Definition at line 219 of file pipsolar.h.


The documentation for this class was generated from the following files: